User Manual

Functions
109357_en_00 PHOENIX CONTACT 97 / 196
10.1.2 Tariff selection
A switchover from one tariff to another can be performed via the digital input. Depending on
the status of the input signal, tariff meter 1 or tariff meter 2 is used. Two of the four tariffs of
the device can be used via the digital input.
Via the web server, you can manually configure up to four tariffs (identifiers 1 to 4) and read
them via the communication interface.
Navigation on the web
server
“Settings, Tariffs”
Figure 10-3 Menu: “Settings, Tariffs, Digital input”