User Manual

EMpro - multifunctional energy measuring devices for DIN rail mounting
108 / 196
PHOENIX CONTACT 109357_en_00
10.2.3 Manually
With the “Manually” function, the digital output can be enabled and disabled via the Modbus
communication interface. Here, you also have to define whether the output is normally
closed (NC) or normally open (NO) in idle state.
Navigation on the web
server
“Settings, Digital output”, “Manually” function
Figure 10-15 Menu: “Settings, Digital output”, “Manually” function
Status The “Status” area shows the current status of the digital output.
Identifier The identifier can be used to assign a user-specific designation to the digital output.
Idle level There are two possible statuses for the idle level.