User Manual

Functions
109357_en_00 PHOENIX CONTACT 119 / 196
10.3.1 Tariff selection via the communication interface
The individual tariffs can also be selected via the Modbus communication interface. With
the addresses in the register tables, a user-specific usage of all tariff meters can be defined,
which is configured completely by means of the controller.
Navigation on the web
server
“Tariffs, Settings”
Figure 10-23 Menu: “Tariffs, Settings”
Status The “Status” area shows the current status of the tariff function.
Settings Configure the tariff selection according to your requirements.
Identifier Define the designations for your tariffs.
Mode Set the mode to “Manually”.
Tariff meter Select the desired tariff from the drop-down menu.