User Manual

Functions
109357_en_00 PHOENIX CONTACT 129 / 196
Figure 10-33 “Menu: Logging, Settings”
Log 1...8 Here, you can configure up to eight different logging parameters.
Data source Select the desired electrical parameter from the drop-down menu for the logging.
Interval Enter the interval time in minutes. The shortest duration that can be set is 1 minute.
The maximum logging duration depends on the configured interval. For an interval of 15
minutes, the logging capacity is approx. 90 days. If you shorten the interval, the logging
capacity is also reduced (e.g., 10 minute interval/60 days logging capacity).
Circular buffer If you want to use the FIFO principle (first-in/first-out) for the data logging, activate the
circular buffer.
If you want to define a fixed starting point, deactivate the circular buffer.
The logging automatically stops once the memory is full.