User Manual

Basic device configuration
109357_en_00 PHOENIX CONTACT 31 / 196
5 Basic device configuration
The first time the energy measuring device is switched on, the installation wizard for the first
configuration (basic device configuration) automatically starts. In the basic device
configuration, you can edit the default settings of the device. Depending on the
requirements, you can perform the basic device configuration via the display or via the
integrated web server.
Menu-driven configuration is available for the following parameters:
– Language
– Network settings
– Grid type
– Current input
– Voltage input
5.1 Basic device configuration via the display
1. To start the first configuration (basic device configuration) of your energy measuring
device, press the button.
Figure 5-1 Starting the basic device configuration
5.1.1 Step 1: Language selection
Figure 5-2 Language selection
1. Use the and buttons to select the desired language.
2. To proceed, press the button.