User Manual

Basic device configuration
109357_en_00 PHOENIX CONTACT 37 / 196
For additional information, please refer to Section “Configuration” on page 71.
5.2 Basic device configuration via the web server
By default, a static IP address is set for the device.
To start the basic device configuration via the web server, open the Internet browser. Enter
the following URL:
Make sure that your computer and the energy measuring device are in the same network.
We recommend using the integrated web server to perform the device configuration. You
can access the web server directly after you have switched on the device. An installation
wizard guides you through the basic device configuration process.
IP address: 192.168.1.2
Subnet mask: 255.255.255.0
Default gateway: 0.0.0.0
DHCP: Off
DNS server: 0.0.0.0