User Manual

Device settings and information
109357_en_00 PHOENIX CONTACT 63 / 196
7.3.5 Activating color change for alarm
Navigation on the display “Display, Alarm light”
Figure 7-17 Menu: “Display, Alarm light”
Figure 7-18 Settings: “Display, Alarm light”
Alarm light The backlight of the display can change from white to red in the event of an error (color
change).
When the “Alarm light” checkbox is enabled, the color change is active.
In the default setting, the color change is enabled.
You can also change the settings for the alarm light via the web server (see “Red color
change in case of error” on page 65).