User Manual

EMpro - multifunctional energy measuring devices for DIN rail mounting
80 / 196
PHOENIX CONTACT 109357_en_00
If you want to transfer the entire device configuration directly from one device to another,
use the “Select all” button to enable all checkboxes in the overview. The network connection
is not activated. If you want to include the network configuration, select it additionally.
Observe the following:
– You have to know the IP addresses and passwords of the devices.
– All devices have to be accessible via the network.
In addition to transferring the entire device configuration, you can also perform a partial
transfer of the configuration by selecting the required checkboxes.
Enter the device addresses and passwords into the respective fields.
To check the connection to the entered device, click the “Check connection” button.
Click the “Transfer” button to transfer the selected configuration data to the devices.