User Manual

Communication

109357_en_00 PHOENIX CONTACT 137 / 196

The Ethernet interfaces (X2 and X3) do not offer any options for device configuration and

can therefore not be reached via the display or the web server.

The interfaces only offer a read function for the data via the dual ports (2xRJ45).

The associated IP addresses are assigned accordingly via the controller.

You can use both communication protocols with only one Ethernet cable. To do so, bridge

Ethernet interfaces X1 and X3. Via the Ethernet interface X2, both protocols (Modbus/TCP

and PROFINET) can now be used in parallel.

EtherNet/IP™

Figure 11-4

Table 11-4

The Ethernet interfaces (X2 and X3) do not offer any options for device configuration and

can therefore not be reached via the display or the web server.

The interfaces only offer a read function for the data via the dual ports (2xRJ45).

The associated IP addresses are assigned accordingly via the controller.

You can use both communication protocols with only one Ethernet cable. To do so, bridge

Ethernet interfaces X1 and X3. Via Ethernet interface X2, both protocols (Modbus/TCP

and EtherNet/IP™) can now be used in parallel.

X1 Modbus/TCP Write and read access

X2 EtherNet/IP™ Read access

X3 EtherNet/IP™ Read access

X3X2