User Manual

EMpro - multi-functional energy measuring devices for front panel installation
100 / 192
PHOENIX CONTACT 108904_en_00
10.2 Digital output
The digital output complies with IEC 61131-2 Type 3. It can be configured via the web server
or the Modbus communication interface.
Navigation on the web
server
“Settings, Digital output”
Figure 10-12 Menu: “Settings, Digital output”
Status The “Status” area shows the current status of the digital output.
Identifier The identifier can be used to assign a user-specific designation to the digital output.
Idle level There are two possible statuses for the idle level.