User Manual

EMpro - multi-functional energy measuring devices for front panel installation
14 / 192
PHOENIX CONTACT 108904_en_00
A variety of parameters from the EMpro energy measuring device can be read or configured
in order to communicate with higher-level control systems. These parameters, the associ-
ated addresses, additional information and help texts are available on the web server. All
information required for setting up communication with higher-level control systems is con-
tained in a register table on the integrated web server. It is therefore usually not necessary
to look up parameters in the paper copy of the documentation.
The register table contains:
– Device data
– Device information
– Device configuration (digital input/digital output)
– Network (TCP/IP)
– Interfaces for higher-level control systems (e.g., Modbus/RTU, Modus/TCP, PROF-
INET, EtherNet/IP™)
– Control and status registers
– Device control
– Device status
– Measuring system control
– Process data
– Measured values
– Counter values
– Impulse counter
– Statistics
– Total harmonic distortion THD
– Harmonics
– Voltage quality