User Manual

EMpro - multi-functional energy measuring devices for front panel installation
52 / 192
PHOENIX CONTACT 108904_en_00
7.2 Date and time
7.2.1 Reading the date and time
Navigation on the display “Date / Time”
Figure 7-3 “Date / Time” menu
Figure 7-4 Settings: “Date / Time”
On the device display, you can only read the date and time settings.
The date and time settings can only be changed via the integrated web server or the Mod-
bus communication interface.
The web server provides the following modes for setting the date and time:
– Manually
– SNTP server
When the device is switched off, or in the event of a power loss, the device retains the sys-
tem time for at least one day.
This is usually adequate for maintenance and installation work.