User Manual

Basic device configuration
108904_en_00 PHOENIX CONTACT 31 / 192
5 Basic device configuration
The first time the energy measuring device is switched on, the installation wizard for the first
configuration (basic device configuration) automatically starts. In the basic device configu-
ration, you can edit the default settings of the device. Depending on the requirements, you
can perform the basic device configuration via the display or via the integrated web server.
Menu-driven configuration is available for the following parameters:
– Language
– Network settings
– Grid type
– Current input
– Voltage input
5.1 Basic device configuration via the display
1. To start the first configuration (basic device configuration) of your energy measuring de-
vice, press the button.
Figure 5-1 Starting the basic device configuration
5.1.1 Step 1: Language selection
Figure 5-2 Language selection
1. Use the and buttons to select the desired language.
2. To proceed, press the button.