User Manual

EMpro - multi-functional energy measuring devices for front panel installation
32 / 192
PHOENIX CONTACT 108904_en_00
5.1.2 Step 2: Network settings
Figure 5-3 Network settings
1. If you do not want to edit the network settings, press the button.
2. If you want to edit the network settings, press the button.
5.1.3 Step 3: IPv4
Figure 5-4 IPv4
1. To enter a network setting, use the or button to scroll to the desired setting.
2. To open edit mode, press the button.
3. To scroll through the possible values, use the buttons and .
4. Next, apply the settings by pressing the button.
5. After you have entered all settings, press the button to proceed.