User Manual

EMpro - multi-functional energy measuring devices for front panel installation
54 / 192
PHOENIX CONTACT 108904_en_00
7.2.3 Synchronizing the date and time with an SNTP server
Navigation on the web
server
“Settings, Date / Time, Settings, SNTP Server” mode
Figure 7-6 Menu: “Settings, Date / Time, Settings, SNTP Server” mode
Settings Here, you can change the settings for the date and time.
Mode Via the “SNTP server” Modbus, the internal clock of the device is automatically synchro-
nized with an SNTP server (Simple Network Time Protocol).
SNTP server Enter the address or the URL of the SNTP server and check the entered address by clicking
“check connection”.
Polling cycle Enter the desired polling rate in seconds (s).
Time zone Here, you can select a time zone. You can find a list of all time zones in Section “Time zones”
on page 55.
Summer time rule Here, you can select a summer time rule. A description of the summer time rules can be
found in Section “Summer time rule” on page 57.