User Manual

Functions
108904_en_00 PHOENIX CONTACT 95 / 192
10.1.2 Tariff selection
A switchover from one tariff to another can be performed via the digital input. Depending on
the status of the input signal, tariff meter 1 or tariff meter 2 is used. Two of the four tariffs of
the device can be used via the digital input.
Via the web server, you can manually configure up to four tariffs (identifiers 1...4) and read
them via the communication interface.
Navigation on the web
server
“Settings, Tariffs”
Figure 10-3 Menu: “Settings, Tariffs, Digital input”