User Manual

Functions
108904_en_00 PHOENIX CONTACT 99 / 192
Navigation on the web
server
“Settings, Average values”
Figure 10-11 Menu: “Settings, Average values, Status”
The digital input can be used to synchronize the average value generation. This function is
used, e.g., when energy requirements have been defined that are not to be exceeded.
When the average values are not synchronized, the measuring results might not correspond
to the relevant energy requirements.
10.1.4 Acknowledgment of alarms
In most applications, configured alarms that occur in the event of an error in the application
are self-acknowledging. After the error status has been restored to the normal status (oper-
ation) of the applications, the alarm message disappears again.
You can save an error status in the application until it is manually reset via the digital input.