Web-Panels mit TFT-Display Anwenderhandbuch UM DE WEB PANELS
Anwenderhandbuch Web-Panels mit TFT-Display 2014-07-01 Bezeichnung: UM DE WEB PANELS Revision: 02 Artikel.-Nr.: — Dieses Handbuch ist gültig für: Bezeichnung Artikel-Nr.
So erreichen Sie uns Internet Aktuelle Informationen zu Produkten von Phoenix Contact und zu unseren Allgemeinen Geschäfts- und Garantiebedingungen finden Sie im Internet unter: phoenixcontact.com Stellen Sie sicher, dass Sie immer mit der aktuellen Dokumentation arbeiten. Diese steht unter der folgenden Adresse zum Download bereit: phoenixcontact.
WP 04T, WP 06T, WP 07T/WS, WP 09T/WS, WP 10T, WP 15T PHOENIX CONTACT
Inhaltsverzeichnis Inhaltsverzeichnis 1 2 3 4 Wichtige Hinweise .....................................................................................................................7 1.1 Symbole ................................................................................................................ 7 1.2 Sicherheitshinweise............................................................................................... 7 1.3 Bestimmungsgemäßer Gebrauch........................................
WP 04T, WP 06T, WP 07T/WS, WP 09T/WS, WP 10T, WP 15T 6.7 6 PHOENIX CONTACT WP 15T ...............................................................................................................
Wichtige Hinweise 1 Wichtige Hinweise 1.1 Symbole In diesem Handbuch werden Symbole verwendet, um Sie auf Hinweise und Gefahren aufmerksam zu machen. Dieses Symbol kennzeichnet Gefahren, die zu Personenschäden führen können. Beachten Sie alle Hinweise, die mit diesem Hinweis gekennzeichnet sind, um mögliche Personenschäden zu vermeiden. Es gibt drei verschiedene Gruppen von Personenschäden, die mit einem Signalwort gekennzeichnet sind.
WP 04T, WP 06T, WP 07T/WS, WP 09T/WS, WP 10T, WP 15T 1.3 – – – Bestimmungsgemäßer Gebrauch Das Bediengerät ist ausgelegt für den Einsatz im Industriebereich. Das Bediengerät ist nach dem Stand der Technik und den anerkannten sicherheitstechnischen Regeln gebaut. Dennoch können bei der Verwendung Gefahren bzw. Beeinträchtigungen an der Maschine oder an anderen Sachwerten entstehen. Das Bediengerät erfüllt die Anforderungen der EMV-Richtlinien und harmonisierten europäischen Normen.
Einbau und Inbetriebnahme 2 Einbau und Inbetriebnahme 2.1 Auspacken Packen Sie alle Teile sorgfältig aus und überprüfen Sie den Inhalt auf sichtbare Transportschäden. Überprüfen Sie ebenfalls, ob die Lieferung mit den Angaben auf dem Lieferschein übereinstimmt. Wenn Sie Transportschäden oder Unstimmigkeiten feststellen, setzen Sie sich unverzüglich mit Phoenix Contact in Verbindung. 2.
WP 04T, WP 06T, WP 07T/WS, WP 09T/WS, WP 10T, WP 15T 2.2.1 Maße der Frontplatte 2.2.1.
Einbau und Inbetriebnahme 2.2.1.
WP 04T, WP 06T, WP 07T/WS, WP 09T/WS, WP 10T, WP 15T 2.2.1.
Einbau und Inbetriebnahme 2.2.1.
WP 04T, WP 06T, WP 07T/WS, WP 09T/WS, WP 10T, WP 15T 2.2.1.
Einbau und Inbetriebnahme 2.2.1.
WP 04T, WP 06T, WP 07T/WS, WP 09T/WS, WP 10T, WP 15T 2.2.2 Montageausschnitt 2.2.2.
Einbau und Inbetriebnahme 2.2.2.
WP 04T, WP 06T, WP 07T/WS, WP 09T/WS, WP 10T, WP 15T 2.2.2.
Einbau und Inbetriebnahme 2.2.2.
WP 04T, WP 06T, WP 07T/WS, WP 09T/WS, WP 10T, WP 15T 2.2.2.
Einbau und Inbetriebnahme 2.2.2.
WP 04T, WP 06T, WP 07T/WS, WP 09T/WS, WP 10T, WP 15T 2.2.3 Seitenansicht, Einbautiefe 2.2.3.
Einbau und Inbetriebnahme 2.2.3.
WP 04T, WP 06T, WP 07T/WS, WP 09T/WS, WP 10T, WP 15T 2.2.3.
Einbau und Inbetriebnahme 2.2.3.
WP 04T, WP 06T, WP 07T/WS, WP 09T/WS, WP 10T, WP 15T 2.2.3.
Einbau und Inbetriebnahme 2.2.3.
WP 04T, WP 06T, WP 07T/WS, WP 09T/WS, WP 10T, WP 15T 2.3 Anschließen 2.3.1 Versorgungsspannung Die Versorgungsspannung wird über die Stiftleiste X1 zugeführt. Die geeignete Buchsenleiste ist im Lieferumfang enthalten. Die zulässige Versorgungsspannung für das Bediengerät entnehmen Sie den technischen Daten. Das Gerät verfügt über einen Verpolschutz. Bei falscher Polung wird das Gerät nicht in Betrieb gesetzt. Dieses Gerät ist ein Betriebsmittel der Schutzklasse I.
Einbau und Inbetriebnahme 3. 4. Stecken Sie die Buchsenleiste auf die Stiftleiste X1 am Bediengerät. Sichern Sie die Buchsenleiste durch die Schraubverriegelung gegen Herausrutschen. 2.3.2 Erdung Die Erdung wird - abhängig vom Gerätetyp - mit einer Flachsteckhülse (fremdspannungsarme Erde / Funktionserde) oder einem Ringkabelschuh (Schutzerde) durchgeführt. ACHTUNG: Beschädigung Für die Erdung müssen Sie eine getrennte Kupferleitung vorsehen.
WP 04T, WP 06T, WP 07T/WS, WP 09T/WS, WP 10T, WP 15T 2.4 Einschalten Das Bediengerät ist mit dem Betriebssystem Windows CE ausgestattet, darauf arbeitet der Microbrowser. 2.4.1 Ladevorgang innerhalb des Betriebssystems Windows CE Das Bediengerät ermöglicht Ihnen, während der Startphase mit den Schaltflächen Änderungen an der Konfiguration vorzunehmen. Das Bediengerät hat drei Betriebsarten: – Normal (keine Schaltfläche wurde gedrückt) – Settings (Schaltfläche Settings...
Einbau und Inbetriebnahme 2.4.1.2 Betriebsart Settings Drücken Sie während der Startphase die Schaltfläche Settings..., so wird das Bild für die Einstellungen geöffnet. V.1.5.15.130 OS.5.0.1400.3 Settings Auto scale view on display size Activate Code and Logout after... Start URL below after... 10 min. 5 sec. http://192.168.0.2/entry.html Info Page Restore Save Test Settings OS Settings... Quit Info Page Device Name: Serial Nr.: MicroBrowser Ver.: WP 04T 200907210055 1.5.15.
WP 04T, WP 06T, WP 07T/WS, WP 09T/WS, WP 10T, WP 15T Settings, Restore: Die letzte Änderung wird rückgängig gemacht. Settings, Save: Die Einstellungen werden gespeichert. Settings, Test Settings: Folgende Tests sind möglich: Summer an/aus, Hintergrundbeleuchtung an/aus, Helligkeit 1/15/32 Settings, OS Settings...: Die Betriebsart Setup Main wird gestartet. Settings, Quit: Das Bild für die Einstellungen wird beendet und die Start URL wird aufgerufen. 2.4.1.
Einbau und Inbetriebnahme Update, Copy USB Stick, Copy to Flash: Kopiert die Daten aus dem Verzeichnis „Backup“ des USB-Sticks in das interne Flash Filesystem. Die Systemeinstellungen können über den Punkt „Import Settings“ wiederhergestellt werden. Update, Copy USB Stick, Copy to USB: Kopiert den Inhalt des Flash Filesystems in das Verzeichnis „Backup“ auf dem USB-Stick. Ausgenommen sind geschützte Systemdateien.
WP 04T, WP 06T, WP 07T/WS, WP 09T/WS, WP 10T, WP 15T Touch Screen & Registry, Change Display Mode: Change Display Mode Current Mode Cancel A A OK A LCD Saver A Bild 2-28 Change Display Mode Einstellung der Display-Ausrichtung. LCD Saver schaltet die Helligkeit auf den niedrigsten Wert, wenn eine Stunde lang keine Eingaben erfolgen. Dieser Eintrag kann mit einem Passwort geschützt werden. Touch Screen & Registry, Start Calibration: Die Touch-Kalibrierung wird gestartet.
Einbau und Inbetriebnahme Touch Screen & Registry, SNTP Settings: SNTP Settings Time Synchronization No SNTPSNTP Client Server SNTPServer myserver.myhost.local Interval [minutes] 5 OK Cancel Bild 2-30 SNTP Settings Wenn Sie die Option „SNTP-Client“ aktivieren, können Sie die Adresse eines im Intranet oder Internet befindlichen Zeitservers eingeben. Das Intervall für die Synchronisation geben Sie in Minuten an. Mit der Option „No SNTP“ liest das Bediengerät die Zeitinformation aus der Steuerung.
WP 04T, WP 06T, WP 07T/WS, WP 09T/WS, WP 10T, WP 15T – – – – – – – Device-Name DHCP-Status Gateway-Adresse 1. DNS-Adresse 2. DNS-Adresse 1. WINS-Adresse 2. WINS-Adresse Network Settings, Fix Settings, IP Address: IP Address IP Address 000.000.000.000 Subnet Mask 000.000.000.000 OK Bild 2-33 Cancel IP Address DHCP wird automatisch abgewählt und optional werden die Einstellungen bei vorhandenem USB-Stick aus der Datei „IPSetting.ini“ übernommen.
Einbau und Inbetriebnahme Network Settings, Fix Settings, DNS: DNS Primary DNS 000.000.000.000 Secondary DNS 000.000.000.000 OK Cancel Bild 2-35 DNS DHCP wird abgewählt und bei vorhandenem USB-Stick werden die Einstellungen aus der Datei „IPSetting.ini“ übernommen. Diese Datei muss auf dem Root-Verzeichnis des USBSticks vorhanden sein. Wenn kein USB-Stick gesteckt ist, werden die Informationen aus der Registry gelesen. Dieser Eintrag kann mit einem Passwort geschützt werden.
WP 04T, WP 06T, WP 07T/WS, WP 09T/WS, WP 10T, WP 15T Mit diesem Punkt aktivieren Sie den DHCP-Dienst. Diese Einstellung müssen Sie beim Verlassen oder über den Punkt „Save Registry Settings“ speichern. Dieser Eintrag kann mit einem Passwort geschützt werden. Network Settings, FTP Settings, Add new user: Add new user Enter User MyName Enter Password **** Confirm Password **** OK Cancel Bild 2-38 Add new user Ein neuer Benutzername kann eingegeben werden.
Einbau und Inbetriebnahme Dieser Eintrag kann mit einem Passwort geschützt werden. Settings: Settings Contrast Home Date / Time Printer Password Information Bild 2-41 Settings Settings, Contrast: Contrast Contrast Brightness 15 15 Color Depth 8 bpp 16 bpp OK Bild 2-42 Apply Cancel Contrast Für die Anzeige der Betriebsart „Setup Main“ werden Standardwerte für Kontrast und Helligkeit verwendet, um auch bei fehlerhaften Werten eine Anzeige zu gewährleisten.
WP 04T, WP 06T, WP 07T/WS, WP 09T/WS, WP 10T, WP 15T Stellen Sie das Datum, die Uhrzeit und die Zeitzone ein. Settings, Password: Password Current Password Enable Password Change OK Cancel Bild 2-44 Password Das Passwort kann aktiviert, deaktiviert oder neu definiert werden. Bei aktiviertem Passwort sind alle passwortgeschützten Dialoge nur über vorherige Passworteingabe zu erreichen. Dieser Eintrag kann mit einem Passwort geschützt werden.
Einbau und Inbetriebnahme Auswahl des Papierformats, entweder Letter oder A4, Letter ist Standard. Dieser Eintrag wird automatisch in der Registry gesichert. Settings, Printer, Network Print: Network Print Network Printer Path: Network Server Login OK Cancel Bild 2-47 Network Print Geben Sie den Pfad zum Netzwerkdrucker ein. Dieser Eintrag wird automatisch in der Registry gesichert.
WP 04T, WP 06T, WP 07T/WS, WP 09T/WS, WP 10T, WP 15T – – – – – Built Datum Größe des Flash Größe des SRAM Größe des PLC / Visu RAM Bus-Taktrate Start Batchfile: Die Datei „project.bat“ im Verzeichnis „FlashDrv“ startet, falls vorhanden.
Bedien- und Anzeigeelemente 3 Bedien- und Anzeigeelemente 3.1 Touchscreen Das Gerät ist mit einem resistiven 4-Draht-Touchscreen ausgestattet. Mit diesem Touchscreen bedienen Sie das Gerät. ACHTUNG: Beschädigung Spitze oder scharfe Gegenstände wie Stifte oder Fingernägel können zu irreparablen Schäden des Touchscreens führen. Verwenden Sie deshalb ausschließlich die Fingerkuppen oder die in den technischen Daten angegebenen Hilfsmittel zur Bedienung. 3.
WP 04T, WP 06T, WP 07T/WS, WP 09T/WS, WP 10T, WP 15T 44 PHOENIX CONTACT 8361_de_02
Geräteschnittstellen 4 Geräteschnittstellen 4.
WP 04T, WP 06T, WP 07T/WS, WP 09T/WS, WP 10T, WP 15T 4.1.1 Ethernet (X5) Am Bediengerät befindet sich eine 10/100Base-T Ethernet-Schnittstelle. 4.1.1.1 Steckerbelegung Steckverbinder im Bediengerät: RJ45-Buchse. Tabelle 4-1 Belegung der Ethernet-Schnittstelle Pin Bezeichnung Funktion 1 Tx+ Sendedaten, positive Polarität 2 Tx- Sendedaten, negative Polarität 3 Rx+ Empfangsdaten, positive Polarität 4 n.c. Nicht verbunden 5 n.c.
Geräteschnittstellen 4.1.1.3 Diagnose Am Bediengerät befinden sich Ethernet-Diagnose-LEDs. Bild 4-2 Anordnung der Ethernet-Diagnose-LEDs Tabelle 4-2 Funktion der Ethernet-Diagnose-LEDs Nr. Farbe Zustand Bezeichnung Funktion 1 Grün Ein XMT Ethernet-Datentelegramm wird gesendet 2 Gelb Ein RCV Ethernet-Datentelegramm wird empfangen 4.1.2 USB (X9, X10) Am Bediengerät sind zwei Host-Schnittstellen vorhanden. ACHTUNG Bei Verwendung nicht industrietauglicher Eingabegeräte (z.B.
WP 04T, WP 06T, WP 07T/WS, WP 09T/WS, WP 10T, WP 15T 48 PHOENIX CONTACT 8361_de_02
Wartung und Pflege 5 Wartung und Pflege 5.1 Frontplatte Um eventuelle Verunreinigungen von der Frontplatte zu entfernen, verwenden Sie ein feuchtes Tuch. Für stärkere Verschmutzungen können Sie auch Isopropanol einsetzen. 5.2 Sicherung ACHTUNG: Beschädigung Die Halbleitersicherung ist nicht für einen Austausch konzipiert! Zum Schutz des Gerätes wird eine Halbleitersicherung verwendet.
WP 04T, WP 06T, WP 07T/WS, WP 09T/WS, WP 10T, WP 15T 50 PHOENIX CONTACT 8361_de_02
Technische Daten 6 Technische Daten 6.1 Allgemein Touchscreen Typ Analog resistiv, 4-Draht-Technik Aktivierungsdruck 15 g (Standard) Mit R8, HS60 Silikonkautschuk Haltbarkeit Nach 3 Millionen Anschlägen sind keine Beschädigungen oder Fehlfunktionen unter folgenden Bedingungen aufgetreten: Anschlag Element: R8, HS40 Silikonkautschuk Anschlag Druck: 150 g Anschlag Frequenz: 3 Hz Ethernet X5 Ethernet 10/100Base-T USB Entspricht der „Universal Serial Bus Specification Rev. 2.0“ X9, X10 Host Min.
WP 04T, WP 06T, WP 07T/WS, WP 09T/WS, WP 10T, WP 15T Normen und Richtlinien Störfestigkeit DIN EN 61000-4-2 DIN EN 61000-4-3 DIN EN 61000-4-4 DIN EN 61000-4-5 DIN EN 61000-4-6 DIN EN 61000-6-2 Störaussendung DIN EN 55011 Grenzwertklasse A DIN EN 55022 Grenzwertklasse A DIN EN 61000-6-4 Betriebsmittelanforderung DIN EN 61131-2 Lagerung und Transport DIN EN 61131-2 Stromversorgung DIN EN 61131-2 Elektromagnetische Verträglichkeit 2004/108/EG Schutzarten DIN EN 60529 Stoßbeanspruchung, Schocken
Technische Daten 6.2 WP 04T Display Größe (diagonal) in cm (Zoll) 8,89 (3,5) Typ TFT (Farbe) Auflösung (Pixel) 320 x 240 Farben 65536 Ablesewinkel (vertikal / horizontal) 150° / 130° Hintergrundbeleuchtung LED Halbwertszeit Hintergrundbeleuchtung 40.
WP 04T, WP 06T, WP 07T/WS, WP 09T/WS, WP 10T, WP 15T 6.3 WP 06T Display Größe (diagonal) in cm (Zoll) 14,48 (5,7) Typ TFT (Farbe) Auflösung (Pixel) 320 x 240 Farben 65536 Ablesewinkel (vertikal / horizontal) 135° / 150° Hintergrundbeleuchtung LED Halbwertszeit Hintergrundbeleuchtung 40.
Technische Daten 6.4 WP 07T/WS Display Größe (diagonal) in cm (Zoll) 17,78 (7) Typ TFT (Farbe) Auflösung (Pixel) 800 x 480 Farben 65536 Ablesewinkel (vertikal / horizontal) 130° / 140° Hintergrundbeleuchtung LED Halbwertszeit Hintergrundbeleuchtung 40.
WP 04T, WP 06T, WP 07T/WS, WP 09T/WS, WP 10T, WP 15T 6.5 WP 09T/WS Display Größe (diagonal) in cm (Zoll) 22,86 (9) Typ TFT (Farbe) Auflösung (Pixel) 800 x 480 Farben 65536 Ablesewinkel (vertikal / horizontal) 170° / 170° Hintergrundbeleuchtung LED Halbwertszeit Hintergrundbeleuchtung 70.
Technische Daten 6.6 WP 10T Display Größe (diagonal) in cm (Zoll) 26,42 (10,4) Typ TFT (Farbe) Auflösung (Pixel) 800 x 600 Farben 65536 Ablesewinkel (vertikal / horizontal) 110° / 140° Hintergrundbeleuchtung LED Halbwertszeit Hintergrundbeleuchtung 50.
WP 04T, WP 06T, WP 07T/WS, WP 09T/WS, WP 10T, WP 15T 6.7 WP 15T Display Größe (diagonal) in cm (Zoll) 38,1 (15) Typ TFT (Farbe) Auflösung (Pixel) 1024 x 768 Farben 65536 Ablesewinkel (vertikal / horizontal) 145° / 160° Hintergrundbeleuchtung LED Halbwertszeit Hintergrundbeleuchtung 50.
A1 Stichwortverzeichnis A S Anschließen ................................................................ 28 Auspacken .................................................................... 9 Schnittstelle Ethernet................................................................. 46 USB....................................................................... 47 Sicherheitshinweise ...................................................... 7 Sicherung...............................................................
WP 04T, WP 06T, WP 07T/WS, WP 09T/WS, WP 10T, WP 15T 60 PHOENIX CONTACT 8361_de_02