Datasheet

ETD-BL-1T-ON-...
103615_en_02 PHOENIX CONTACT 6
8 Time setting
6
A1+
A2-
12
14
11
+
–
ON
0,1-10s
R
x10%
1
The time can be adjusted variably using a screwdriver (blade
width 2.5 mm). The value set on the knurled wheel multiplied
by 10 gives the percentage set value of the time end value.
Example:
Time end range of the time relay = 10 s
1 Setting on the knurled wheel = 6 6 x 10 % = 60 %
Time end range of the time relay = 10 s 60 % of 10 s = 6 s
According to the setting of the knurled wheel (1...10), you can
also read the time directly from the "Time setting for different
time setting ranges" table.
Time settings for various time setting ranges:
Position
Knurled wheel
0.1 - 10 s
time [seconds]
3 - 300 s
time [seconds]
0.3 - 30 min
time [minutes]
3 - 300 min
time [minutes]
0 0,1 3 0,3 3
1130330
2260660
3390990
4 4 120 12 120
5 5 150 15 150
6 6 180 18 180
7 7 210 21 210
8 8 240 24 240
9 9 270 27 270
10 10 300 30 300
The following table shows some examples: All intermediate values (e. g. 1.5) can be adjusted.
The smallest adjustable time is reached at position "0". No time can be set between "10" and "0". This area is
identified with a quickly flashing geed LED.