Datasheet

ManualsBrandsPhoenix Contact ManualsAutomationTime Lag Relay Delayed operation

1Description

Timer relay with switch-on delay (with control

contact) and adjustable time

ETD-BL-1T-ON-CC-...

Data sheet

INTERFACE

Compact time relay in the 6.2 mm housing in order to control

time sequences.

The time is set on the front side using a labeled knurled wheel

which is sunk in order to prevent unintentional adjustment.

The time can be set using a screwdriver (blade width

2.5 mm).

The compact time relays are available with varied time ranges

as well as with screw and spring-cage connections.

WARNING: Risk of electric shock

Never carry out work when voltage is present.

Make sure you always use the latest documentation.

It can be downloaded at www.phoenixcontact.net/catalog

This data sheet is valid for all products listed on the following page:

– 6.2 mm narrow housing

– With switch-on delay (with control contact)

–Adjustable time

– Easy and accurate time setting

– Supply voltage 24 V DC

– Output: A floating PDT

103616_en_02

Features

Summary of content (7 pages)

PAGE 1
ETD-BL-1T-ON-CC-... Timer relay with switch-on delay (with control contact) and adjustable time INTERFACE Data sheet 103616_en_02 1 © PHOENIX CONTACT 2010-06-07 Description Features Compact time relay in the 6.2 mm housing in order to control – time sequences. – The time is set on the front side using a labeled knurled wheel – which is sunk in order to prevent unintentional adjustment. – The time can be set using a screwdriver (blade width – 2.5 mm).
PAGE 2
ETD-BL-1T-ON-CC-... 2 Ordering data Description Type Order No. Pcs. / Pkt. Timer relay with screw connection Time range 0.1...10 s ETD-BL-1T-ON-CC- 10S 2917418 1 Time range 3...300 s ETD-BL-1T-ON-CC-300S 2917421 1 Time range 0.3...30 min ETD-BL-1T-ON-CC- 30MIN 2917434 1 Time range 3...300 min ETD-BL-1T-ON-CC-300MIN 2917447 1 ETD-BL-1T-ON-CC- 10S-SP 2917573 1 1 Timer relay with spring-cage connection Time range 0.1...10 s Time range 3...
PAGE 3
ETD-BL-1T-ON-CC-... General data (Continued) Impulse withstand voltage 6 kV (According to EN 50178) Inflammability class acc. to UL 94 V0 Assembly on TS 35 profile rail acc. to EN 60715 Mounting position Any Width 6.2 mm Height 86 mm Length 80 mm Type of housing Polyamide PA, self-extinguishing Color green Connection data Screw connection Conductor cross section, solid 0.14 mm² ... 2.5 mm² Conductor cross section, stranded 0.14 mm² ... 2.
PAGE 4
ETD-BL-1T-ON-CC-... 5 Safety regulations and installation notes WARNING: Risk of electric shock Never carry out work when voltage is present. Installation notes The device is designed for installation in potentially explosive areas in zone 2. Note: Installation, operation and maintenance may be carried out only by qualified electricians. Follow the specified installation instructions.
PAGE 5
ETD-BL-1T-ON-CC-... 6 Structure 1 2 3 A1 11 ON 0,1-10s 12 14 ETD-BL-1T-ON-10s Ord.-No.:29 17 37 9 t 12/NC 14/NO R t 0% 3 11/COM x1 Function: ON-Delay A1/A2 Relay – Input: 24VDC ± 20% Output: max. 250VAC/4,5A + T amb –20°...
PAGE 6
ETD-BL-1T-ON-CC-... 8 Time setting The time can be adjusted variably using a screwdriver (blade width 2.5 mm). The value set on the knurled wheel multiplied by 10 gives the percentage set value of the time end value. A1+ A2- Example: B1 ON-CC 0,1-10s 1 Time end range of the time relay = 10 s 1 Setting on the knurled wheel = 6 6 x 10 % = 60 % Time end range of the time relay = 10 s 60 % of 10 s = 6 s + According to the setting of the knurled wheel (1...
PAGE 7
ETD-BL-1T-ON-CC-...