Datasheet
https://www.phoenixcontact.com/us/produkte/2924016
Nov 14, 20131/7
Power/input isolating amplifier-MACX MCR-EX-SL-RPSSI-I-
SP-2924016
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
The illustration shows the
versions with screw connection
Ex-i repeater power supply and input signal conditioner, HART. Sends fed or active 0/4-20 mA
signals from the Ex area to a load (active or passive) to the safe area. Electrical 3-way isolation, SIL
2 in accordance with IEC 61508.
Product Features
Power supply possible via DIN rail connector
Up to SIL 2 according to EN 61508
Installation in zone 2, protection type "n" (EN 60079-15) permitted
0/4 ... 20 mA input, [Ex ia] IIC (powered or not powered)
3-way electrical isolation
Terminal point with 250 Ω resistor to increase HART impedance for low-resistance systems
Plug-in screw or spring-cage connection technology (Push-in technology), with integrated sockets for HART communicators
Bidirectional transmission of digital HART communication signals
0/4 ... 20 mA output (active or passive)
Key commercial data
package_quantity
1
GTIN
4046356338066
Technical data
Note:
Utilization restriction
EMC: class A product, see manufacturer's declaration in the
download area
Dimensions
Width
12.5 mm
Height
99 mm
Depth
114.5 mm
Ambient conditions
Ambient temperature (operation)
-20 °C ... 60 °C (Any mounting position)
Ambient temperature (storage/transport)
-40 °C ... 80 °C