Datasheet

https://www.phoenixcontact.com/us/produkte/2924207
Nov 14, 20131/6
Repeater power supply-MACX MCR-SL-RPSSI-I-SP-2924207
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
Repeater power supply and input isolating amplifier, HART. Transfers supplied or active 0/4 - 20 mA
signals to a load (active or passive). 3-way electrical isolation, SIL 2 according to IEC 61508.

Product Features
Power supply possible via DIN rail connector
Up to SIL 2 according to EN 61508
Installation in zone 2, protection type "n" (EN 60079-15) permitted
0/4 ... 20 mA input (powered or not powered)
0/4 ... 20 mA output (active or passive)
Terminal point with 250 Ω resistor to increase HART impedance for low-resistance systems
3-way electrical isolation
Plug-in screw or spring-cage connection technology (Push-in technology), with integrated sockets for HART communicators
Bidirectional transmission of digital HART communication signals
   
Key commercial data
package_quantity
1
GTIN
4046356448338
Technical data
Note:
Utilization restriction
EMC: class A product, see manufacturer's declaration in the
download area
Dimensions
Width
12.5 mm
Height
99 mm
Depth
114.5 mm
Ambient conditions
Ambient temperature (operation)
-20 °C ... 60 °C (Any mounting position)
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Maximum altitude
≤ 2000 m
Permissible humidity (operation)
10 % ... 95 % (no condensation)