Instructions

ManualsBrandsPHOENIX CONTACT ManualsIndustrial Connectors (Misc.)Cable CABLE-D-25SUB/M/OE/0,25/S/2,0M

100008_en_07

CABLE-D...SUB...

Data sheet

1Description

The pre-assembled and shielded D-SUB cables can be used

as control and signal cables in environments prone to

interference. When used with VARIOFACE interface

modules (see INTERFACE catalog), they enable quick and

easy connection between the control and field level

Currents of up to 2 A can be transmitted on each signal path

thanks to the large conductor cross-sections.

Five configuration versions are available:

– D-SUB female connector at one end;

D-SUB pin strip at the other end

– D-SUB female connector at both ends

– D-SUB pin strip at both ends

– D-SUB female connector at one end;

open cable end at the other end

– D-SUB pin strip at one end;

open cable end at the other end

Various D-SUB cables are available as preferred types in fixed

lengths. In addition, cables of any length can be ordered using

version codes.

Cables are tested for short circuit, polarity reversal, and

open circuit, which ensures they are working properly and

prevents time-consuming troubleshooting during startup.

2Table of contents

1 Description .............................................. 1

2 Table of contents..................................... 1

3 Technical data......................................... 2

4 Color code with pin assignment for

CABLE-D...SUB...

........................................... 2

5 Ordering data .......................................... 3

5.1 Shielded system cable with D-SUB female

connector and pin strip .................................. 3

5.2 Shielded system cable with two D-SUB

female connectors ......................................... 5

5.3 Shielded system cable with two D-SUB

pin strips ........................................................ 6

5.4 Shielded system cable with D-SUB female

connector and one open end ......................... 7

5.5 Shielded system cable with D-SUB

pin strip and one open end ............................ 9

5.6 Unassembled shielded system cable .......... 10

Make sure you always use the latest documentation.

It can be downloaded at phoenixcontact.net/products

This data sheet is valid for all products listed on page 3 and onwards:

VARIOFACE system cable with D-SUB female

connector and pin strip

Summary of content (10 pages)

PAGE 1
CABLE-D...SUB... VARIOFACE system cable with D-SUB female connector and pin strip Data sheet 100008_en_07 1 © PHOENIX CONTACT 2017-05-16 Description 2 Table of contents The pre-assembled and shielded D-SUB cables can be used as control and signal cables in environments prone to interference. When used with VARIOFACE interface modules (see INTERFACE catalog), they enable quick and easy connection between the control and field level. 1 Description ..............................................
PAGE 2
CABLE-D...SUB... 3 Technical data General data Maximum permissible operating voltage 25 V AC / 60 V DC Maximum permissible current carrying capacity per path 2A Maximum conductor resistance 0.09 Ω/m Ambient temperature range -20°C ... 50°C Shield Tinned copper braided shield, approximately 85% covering Insertion/withdrawal cycles > 200 Conductor cross-section 24 AWG/0.25 mm² Outside diameter 7.5 mm 9 mm 10.5 mm 12 mm 13.5 mm Dimensions of the D-SUB connector A B C 9-pos. 35 mm 31.
PAGE 3
CABLE-D...SUB... 5 Ordering data 5.1 Shielded system cable with D-SUB female connector and pin strip – – – – Assembly: D-SUB female connector at one end, D-SUB pin strip at the other end according to IEC 807-2/ DIN 41652 (1:1 connection) Cable outlet: Straight Metal-plated housing Screw connection: 2 UNC 4-40 screws Special lengths can be defined using an order key, see ordering example on page 4. Standard lengths Description Assembled round cable, with 9-pos.
PAGE 4
CABLE-D...SUB... Description Assembled round cable, with 50-pos. D-SUB female connector and pin strip in variable lengths 1 Please specify cable length, see ordering example (Minimum length: 0.2 m) 2 Version order number Number of positions 50 Cable Type length Variable CABLE D-SUB-S/50S/C49/... 1 Order No. Pcs./ Pkt. 2302340 2 1 Ordering example for round cable assembled with pin strip at one end and female connector at the other end – Shielded 25-pos. round cable, assembled with a 25-pos.
PAGE 5
CABLE-D...SUB... 5.2 – – – – Shielded system cable with two D-SUB female connectors Assembly: D-SUB female connector at both ends according to IEC 807-2/DIN 41652 (1:1 connection) Cable outlet: Straight Metal-plated housing Screw connection: 2 UNC 4-40 screws Special lengths can be defined using an order key, see ordering example on page 5. Description Number of positions Cable length Type Order No. Pcs./ Pkt.
PAGE 6
CABLE-D...SUB... 5.3 – – – – Shielded system cable with two D-SUB pin strips Assembly: D-SUB pin strip at both ends according to IEC 807-2/DIN 41652 (1:1 connection) Cable outlet: Straight Metal-plated housing Screw connection: 2 UNC 4-40 screws Special lengths can be defined using an order key, see ordering example on page 6. Description Number of positions Cable length Type Assembled round cable, with 9-pos. D-SUB pin strips in fixed lengths 9 1.0 m 2.0 m 3.0 m Assembled round cable, with 9-pos.
PAGE 7
CABLE-D...SUB... 5.4 – – – – Shielded system cable with D-SUB female connector and one open end Assembly: D-SUB female connector at one end, open end at the other end according to IEC 807-2/ DIN 41652 (1:1 connection) Cable outlet: Straight Metal-plated housing Screw connection: 2 UNC 4-40 screws Special lengths can be defined using an order key, see ordering example on page 8. Description Assembled round cable, with 9-pos.
PAGE 8
CABLE-D...SUB... Description Assembled round cable, with 50-pos. D-SUB female connector and one open end in variable lengths 1 Please specify cable length, see ordering example (Minimum length: 0.2 m) 2 Version order number Number of positions 50 Cable Type length Variable CABLE-D-50SUB-F-OE-0,25-S/... 1 Order No. Pcs./ Pkt. 2900908 2 1 Ordering example for round cable assembled with female connector at one end and open end at the other end – Shielded 37-pos.
PAGE 9
CABLE-D...SUB... 5.5 – – – – Shielded system cable with D-SUB pin strip and one open end Assembly: D-SUB pin strip at one end, open end at the other end according to IEC 807-2/ DIN 41652 (1:1 connection) Cable outlet: Straight Metal-plated housing Screw connection: 2 UNC 4-40 screws Special lengths can be defined using an order key, see ordering example on page 10. Description Assembled round cable, with 9-pos.
PAGE 10
CABLE-D...SUB... Number of positions Description Assembled round cable, with 50-pos. D-SUB pin strip and one open end in variable lengths 1 Please specify cable length, see ordering example (Minimum length: 0.2 m) 2 Version order number 50 Cable Type length Variable CABLE-D-50SUB-M-OE-0,25-S/... 1 Order No. Pcs./ Pkt. 2900913 2 1 Ordering example for round cable assembled with pin strip at one end and open end at the other end – Shielded 50-pos. round cable, assembled with a 50-pos.