Datasheet

https://www.phoenixcontact.com/us/produkte/2948908
Nov 9, 20132/5
Solid-state relay module-EMG 10-OE- 24DC/ 48DC/100-2948908
Technical data
Input data
Input voltage range in reference to U
N
0.8 ... 1.2
Switching threshold "0" signal in reference to U
N
≤ 0.4
Switching threshold "1" signal in reference to U
N
≥ 0.8
Typical input current at U
N
8.5 mA
Typical response time
20 µs
Typical turn-off time
100 µs
Status display
Yellow LED
Type of protection
Protection against polarity reversal
Type of protection
Surge protection
Protective circuit/component
Polarity protection diode
Transmission frequency
500 Hz
Output data
Output nominal voltage
48 V DC
Output voltage range
4 V DC ... 48 V DC
Limiting continuous current
100 mA
Voltage drop at max. limiting continuous current
0.9 V
Output circuit
2-wire, floating
Type of protection
Protection against polarity reversal
Type of protection
Surge protection
Protective circuit/component
Polarity protection diode
Connection data
Connection method
Screw connection
Stripping length
8 mm
Screw thread
M3
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
4 mm²
Conductor cross section stranded min.
0.2 mm²
Conductor cross section stranded max.
2.5 mm²
Conductor cross section AWG/kcmil min.
24
Conductor cross section AWG/kcmil max
12
General
Test voltage input/output
3.5 kV AC
Test voltage input/output
3.5 kV AC
Mounting position
Any
Assembly instructions
In rows with zero spacing
Operating mode
100% operating factor
Inflammability class according to UL 94
V0
Standards/regulations
IEC 60664
Standards/regulations
EN 50178
Standards/regulations
IEC 62103