Datasheet

https://www.phoenixcontact.com/us/produkte/2964500
Nov 10, 20132/7
Relay Module-DEK-REL-G24/21-2964500
Technical data
Coil side
Input voltage range in reference to U
N
0.8 ... 1.1
Nominal input current at U
IN
9 mA
Typical response time
8 ms
Typical release time
5 ms
Operating voltage display
Yellow LED
Protective circuit
Protection against polarity reversal Polarity protection diode
Protective circuit
Free-wheeling diode Damping diode
Contact side
Contact type
1 PDT
Contact material
AgSnO
Maximum switching voltage
250 V AC/DC
Minimum switching voltage
12 V AC/DC
Maximum inrush current
6 A
Min. switching current
10 mA
Limiting continuous current
6 A
Interrupting rating (ohmic load) max.
140 W (at 24 V DC)
Interrupting rating (ohmic load) max.
20 W (at 48 V DC)
Interrupting rating (ohmic load) max.
18 W (at 60 V DC)
Interrupting rating (ohmic load) max.
23 W (at 110 V DC)
Interrupting rating (ohmic load) max.
40 W (at 220 V DC)
Interrupting rating (ohmic load) max.
1500 VA (for 250 V AC)
General
Test voltage relay winding/relay contact
4 kV AC (50 Hz, 1 min.)
Operating mode
100% operating factor
Mechanical service life
Approx. 10
7
cycles
Standards/regulations
IEC 60664
Standards/regulations
EN 50178
Standards/regulations
IEC 62103
Rated surge voltage / insulation
6 kV (safe isolation: control side / contact side)
Rated insulation voltage
250 V
Pollution degree
2
Surge voltage category
III
Mounting position
Any
Assembly instructions
In rows with zero spacing
Connection data
Connection method
Screw connection
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
2.5 mm²
Conductor cross section stranded min.
0.2 mm²
Conductor cross section stranded max.
2.5 mm²