Datasheet

ManualsBrandsPHOENIX CONTACT ManualsPhoenix ContactGround modular terminal block MT 1,5-TWIN-PE

https://www.phoenixcontact.com/hq/products/3001705

01/24/2017Page1/8

Ground modular terminal block-MT 1,5-TWIN-PE-3001705

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's

documentation. Our General Terms of Use for Downloads are valid

(http://phoenixcontact.com/download)

Ground modular terminal block, Connection type:Screw connection, Cross section: 0.14 mm²-1.5 mm²,

AWG:26-16, Width:4.2 mm, Color:green-yellow, Mounting type:NS 15

Why buy this product

Low contact resistance

Corrosion-free terminal points

Green-yellow housing

Captive terminal block screws

Key Commercial Data

Packing unit 50 STK

GTIN

GTIN 4017918107215

Custom tariff number 85369010

Technical data

General

Note

When aligning with a feed-through terminal block of the same shape, an

end cover must be interposed for insulation voltages of > 320 V

Number of levels 2

Number of connections 3

Nominal cross section 1.5 mm²

Color green-yellow

Insulating material PA

Flammability rating according to UL 94 V0

Rated surge voltage 4 kV

Degree of pollution 3

Overvoltage category III

Insulating material group I

Summary of content (8 pages)

PAGE 1
https://www.phoenixcontact.com/hq/products/3001705 Ground modular terminal block - MT 1,5-TWIN-PE - 3001705 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Ground modular terminal block, Connection type: Screw connection, Cross section: 0.14 mm² - 1.5 mm², AWG: 26 - 16, Width: 4.
PAGE 2
https://www.phoenixcontact.com/hq/products/3001705 Ground modular terminal block - MT 1,5-TWIN-PE - 3001705 Technical data General Connection in acc. with standard IEC 60947-7-2 Open side panel No Relative insulation material temperature index (Elec.
PAGE 3
https://www.phoenixcontact.com/hq/products/3001705 Ground modular terminal block - MT 1,5-TWIN-PE - 3001705 Technical data Connection data 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.25 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 0.34 mm² Stripping length 6 mm Internal cylindrical gage A1 Screw thread M2 Tightening torque, min 0.22 Nm Tightening torque max 0.
PAGE 4
https://www.phoenixcontact.com/hq/products/3001705 Ground modular terminal block - MT 1,5-TWIN-PE - 3001705 Classifications UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals CSA / UL Recognized / BV / CCA / EAC / DNV GL Ex Approvals Approval details CSA  http://www.csagroup.
PAGE 5
https://www.phoenixcontact.com/hq/products/3001705 Ground modular terminal block - MT 1,5-TWIN-PE - 3001705 Approvals DNV GL https://www.dnvgl.com/ TAE00001CT Accessories Accessories DIN rail DIN rail, unperforated - NS 15 UNPERF 2000MM - 1401695 DIN rail, material: Steel, unperforated, height 5.5 mm, width 15 mm, length: 2 m DIN rail perforated - NS 15 PERF 2000MM - 1401682 DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 5.
PAGE 6
https://www.phoenixcontact.com/hq/products/3001705 Ground modular terminal block - MT 1,5-TWIN-PE - 3001705 Accessories Zack Marker strip, flat - ZBF 4 CUS - 0825023 Zack Marker strip, flat, can be ordered: Strip, white, labeled according to customer specifications, Mounting type: Snap into flat marker groove, for terminal block width: 4.2 mm, Lettering field: 4.2 x 5.2 mm Zack Marker strip, flat - ZBF 4,LGS:FORTL.
PAGE 7
https://www.phoenixcontact.com/hq/products/3001705 Ground modular terminal block - MT 1,5-TWIN-PE - 3001705 Accessories Marker for terminal blocks - UC-TMF 4 CUS - 0824630 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type: Snap into flat marker groove, for terminal block width: 4.2 mm, Lettering field: 3.6 x 5.
PAGE 8
https://www.phoenixcontact.com/hq/products/3001705 Ground modular terminal block - MT 1,5-TWIN-PE - 3001705 Accessories Marker for terminal blocks - UCT-TMF 4 - 0828742 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED, TOPMARK LASER, Mounting type: Snap into flat marker groove, for terminal block width: 4.2 mm, Lettering field: 3.4 x 4.