Datasheet

Table Of Contents

100479_en_00

CLIPFIX 35-5

Data sheet

1 Description

The end bracket provides a secure fit for the components on

the NS 35/7,5 and NS 35/15 mounting rails.

It is characterized by a pitch of 5.2 mm and makes it possi-

ble to accommodate ZB 5, ZBF 5 and KLM 2 for terminal

strip marking.

The end bracket offers parking facilities for FBS plug-in

bridges and test plugs. In addition, it can be continuously

bridged when combined with ST and QTC terminal blocks.

Figure 1 CLIPFIX 35-5 with ZB 5

Make sure you always use the latest documentation.

It can be downloaded at phoenixcontact.net/product/3022276

This document is valid for all products listed in the “Ordering data” on page 2.

End bracket

PAGE 1
CLIPFIX 35-5 End bracket Data sheet 100479_en_00 1 © Phoenix Contact 2023-02-08 Description Figure 1 CLIPFIX 35-5 with ZB 5 The end bracket provides a secure fit for the components on the NS 35/7,5 and NS 35/15 mounting rails. It is characterized by a pitch of 5.2 mm and makes it possible to accommodate ZB 5, ZBF 5 and KLM 2 for terminal strip marking. The end bracket offers parking facilities for FBS plug-in bridges and test plugs.
PAGE 2
CLIPFIX 35-5 2 Ordering data End bracket Description Snap-on end bracket, for 35 mm 3 and 2 mounting rails, can be fitted with ZB 5 and ZBF 5 and adjustable terminal strip marker KLM 2, parking facility for FBS...-5, FBS...-6, KSS 5, KSS 6, PAI 4, MPS, PS-4/E Terminal strip marker, adjustable in height, gray 3 Type CLIPFIX 35-5 Item No. 3022276 Pcs./Pkt. 50 KLM 2 0807575 100 Technical data General data Terminal width Material Inflammability class in acc.