Datasheet

ManualsBrandsPHOENIX CONTACT ManualsPhoenix ContactSTI 2,5-PE PE Protective Conductor Terminal Green-yellow

The asymmetrically arranged terminal foot makes

the STI series stand out against standard terminal

blocks. This foot makes it possible to route the neutral

busbar past the terminal strip and to ﬁx it in the

insulated supports. The neutral busbar makes contact

via the screwless neutral-disconnect slide by simple

levering with a screwdriver. Considerable space

savings in the control cabinet can be made by using the

"mini-spring" spring cage system, without having to

give up the familiar high quality features such as the

generous labeling option, maximum connection space

and the ﬂexible plug-in bridge system.

Assembly

In order to achieve a reliable contact between the

disconnect slide and the neutral busbar, the AB-STI

supports must be mounted at the beginning and end of

each terminal strip or, in the case of longer terminal

strips, approx. every 20 cm.

Spring Cage Installation Terminal Blocks

STI 2,5 and STI 4

Headquarters:

Phone +49-(0) 52 35-3-00 • Fax +49-(0) 52 35-3-4 12 0 • http://www.phoenixcontact.com

Summary of content (7 pages)

PAGE 1
Spring Cage Installation Terminal Blocks STI 2,5 and STI 4 The asymmetrically arranged terminal foot makes the STI series stand out against standard terminal blocks. This foot makes it possible to route the neutral busbar past the terminal strip and to fix it in the insulated supports. The neutral busbar makes contact via the screwless neutral-disconnect slide by simple levering with a screwdriver.
PAGE 2
Spring Cage Installation Terminal Block STI 2,5 (IEC) [mm2] IEC 60 947-7-1 rigid solid flexible stranded AWG I [A] U [V] 0.2-4 0.2-2.5 24-12 32 400 Technical data Spring cage installation terminal block, for mounting on 3 gray blue (1) End cover terminal width 5.2 terminal width 5.2 gray (2) Insulating stop sleeve, prevents unintentional clamping of insulation in the case of smaller cross sections white Cross section range: 0.2 mm2 0.25-0.5 mm2 gray 2 black 0.
PAGE 3
Spring Cage Ground Terminal Block STI 2,5-PE (IEC) [mm2] rigid solid flexible stranded AWG IEC 60 947-7-2 0.2-4 0.2-2.5 24-12 The current carrying capacity of the mounting rails should be observed. Technical data Type Order No. Pcs. Pkt. STI 2,5-PE 30 31 93 7 50 D-STI 2,5 30 30 56 9 50 (2) Insulating stop sleeve, prevents unintentional clamping of insulation in the case of smaller cross sections white Cross section range: 0.2 mm2 0.25-0.5 mm2 gray 2 black 0.
PAGE 4
Spring Cage Installation Terminal Block STN 2,5 (IEC) [mm2] IEC 60 947-7-1 rigid solid flexible stranded AWG I [A] U [V] 0.2-4 0.2-2.5 24-12 32 400 Technical data Type Order No. Pcs. Pkt. Spring cage neutral disconnect terminal block, for mounting on 3 blue terminal width 5.
PAGE 5
Spring Cage Installation Terminal Block STI 4 (IEC) [mm2] IEC 60 947-7-1 rigid solid flexible stranded AWG I [A] U [V] 0.5-6 0.5-4 20-10 41 400 Technical data Spring cage installation terminal block, for mounting on 3 gray blue (1) End cover terminal width 6.2 terminal width 6.2 gray (2) Insulating stop sleeve, prevents unintentional clamping of insulation in the case of smaller cross sections gray Cross section range: 0.25-0.5 mm2 0.
PAGE 6
Spring Cage Ground Terminal Block STI 4-PE (IEC) [mm2] rigid solid flexible stranded AWG IEC 60 947-7-2 0.5-6 0.5-4 20-10 The current carrying capacity of the mounting rails should be observed. Technical data Type Order No. Pcs. Pkt. STI 4-PE 30 31 96 6 50 D-STI 4 30 30 64 0 50 (2) Insulating stop sleeve, prevents unintentional clamping of insulation in the case of smaller cross sections gray Cross section range: 0.25-0.5 mm2 black 0.
PAGE 7
Spring Cage Installation Terminal Block (IEC) [mm2] IEC 60 947-7-1 rigid solid flexible stranded AWG I [A] U [V] 0.5-6 0.5-4 20-10 36 250 Technical data Type Order No. Pcs. Pkt. Spring cage neutral disconnect terminal block, blue terminal width 6.