Datasheet

https://www.phoenixcontact.com/us/products/3035696

01/30/2017Page2/4

Test disconnect terminal block-PTME 6 HV-3035696

Technical data

General

Insulating material group I

Maximum load current 30 A (with 10 mm² conductor cross section)

Nominal current I

30 A

Nominal voltage U

1000 V

Open side panel Yes

Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11

Back of the hand protection guaranteed

Finger protection guaranteed

Result of surge voltage test Test passed

Surge voltage test setpoint 9.8 kV

Result of power-frequency withstand voltage test Test passed

Power frequency withstand voltage setpoint 2.2 kV

Result of the test for mechanical stability of terminal points (5 x conductor

connection)

Test passed

Result of bending test Test passed

Bending test conductor cross section/weight 0.5 mm² / 0.3 kg

6 mm

/ 1.4 kg

10 mm² / 2 kg

Tensile test result Test passed

Conductor cross section tensile test 0.5 mm²

Tractive force setpoint 20 N

Conductor cross section tensile test 6 mm²

Tractive force setpoint 80 N

Conductor cross section tensile test 10 mm²

Tractive force setpoint 90 N

Result of tight fit on support Test passed

Tight fit on carrier NS 35

Setpoint 5 N

Result of voltage-drop test Test passed

Result of temperature-rise test Test passed

Short circuit stability result Test passed

Conductor cross section short circuit testing 4 mm²

Short-time current 0.48 kA

Conductor cross section short circuit testing 0.72 mm²

6 mm²

Short-time current 0.5 kA

Result of aging test Test passed