Datasheet

https://www.phoenixcontact.com/us/produkte/3037818
Nov 9, 20131/13
Knife disconnect terminal block-ST 2,5-MT BU-3037818
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
The figure shows a version of the
article
Knife disconnect terminal block, Connection type:Spring-cage connection, Cross section: 0.08
mm²-4 mm², AWG:28-12, Nominal current:20 A, Nominal voltage:400 V, Length:60.5 mm,
Width:5.2 mm, Color:blue, Assembly:NS 35/7,5, NS 35/15

Product Features
Three and four-conductor terminal blocks can be used for multi-conductor connections
User-friendly wiring thanks to front connection
Test connection parallel to the disconnect point for 2.3 mm diameter test plugs
Consistent and can be double bridged for all tasks in time-saving potential supply and distribution
Compact knife disconnect terminal block with a current carrying capacity of 20 A
Key commercial data
package_quantity
50
GTIN
4017918908560
Technical data
General
Number of levels
1
Number of connections
2
Color
blue
Insulating material
PA
Inflammability class according to UL 94
V0
General
Maximum load current
20 A (with 4 mm² conductor cross section)
Rated surge voltage
6 kV
Pollution degree
3
Surge voltage category
III
Insulating material group
I
Connection in acc. with standard
IEC 60947-7-1
Nominal current I
N
20 A (the maximum load current must not be exceeded by the total
current of all connected conductors)
Nominal voltage U
N
400 V
Open side panel
ja
Dimensions