Datasheet

       
Ex:  
KEMA 98ATEX1651 U / IECEx KEM 06.0034U KEMA 06ATEX0119 U / IECEx KEM 06.0034U KEMA 98ATEX1651 U / IECEx KEM 06.0034U KEMA 98ATEX16
Technical data
Dimensions Width Length Height NS 35/7,5
[mm] 4.2 42.5 42 5.2 42.5 42 5.2 42.5 47 6.2 42.5 47
Dimensions Width Length Height NS 32
[mm] 4.2 42.5 47 5.2 42.5 47 5.2 42.5 52 6.2 42.5 52
Max. electrical data I
max.
[A]  U
max.
[V]  Max. Ø [mm²] AWG (UL)
17.5 500 0.14 - 1.5 30-14 24 800 0.2 - 4 30-12 32 800 0.2 - 4 28-12 41 800 0.2 - 6 30-10
IEC 60947-7-1

Rated data IEC UL CSA IEC/
EN60079-7
Rated voltage [V] 500 300 - 352 800 300 300 550 800 600 600 690 800 600 600 690
Nominal current / cross section [A] / [mm²] 17.5 / 1.5 15 / - - 17 / 1.5 24 / 2.5 20 / - 20 / - 22 / 2.5 24 / 2.5 20 / - 20 / - 23 / 2.5 32 /
Rated cross section [mm²] 1.5 - - 0.14-1.5 2.5 - - 0.2-2.5 2.5 - - 0.2-2.5 4 - - 0.2-4
Cross section range AWG 26 - 16 30-14 - 26 - 16 24 - 12 30-12 28-12 24 - 12 24 - 12 28-12 28-12 24 - 12 24 - 10 30-10 28-10 24 - 10
Connection capacity Solid Stranded Ferrule
  without/with plastic sleeve
1 conductor [mm²] 0.14 - 1.5 0.14 - 1.5 0.25 - 0.75 0.25 - 0.75 0.2 - 4 0.2 - 2.5 0.25 - 2.5 0.25 - 1.5 0.2 - 4 0.2 - 2.5 0.25 - 2.5 0.25 -
2 conductors (of the same type) [mm²] 0.14 - 0.75 0.14 - 0.75 0.25 - 0.34 - 0.2 - 1 0.2 - 1 0.25 - 1 - 0.2 - 1.5 0.2 - 1.5 0.25 - 1.5 - 0.2 -
2 stranded conductors with a TWIN ferrule [mm²] - - - 0.5 - 0.5 - - - 0.5 - 1.5 - - - 0.5 - 1 - - - 0.5 - 2.5
Max. cross section with insertion bridge [mm²] - - - - 2.5 2.5 - - 4 2.5 - - 4 4 - -
General data
Stripping length [mm] 7
Screw thread M2
Tightening torque [Nm] 0.22 - 0.25
Insulating material PA
Inflammability class according to UL 94 V0
Ordering data
Description
No. of
pos.
Color Type I
max
Order No.
Pcs. /
Pkt.
Terminal block, for mounting on NS32... or
NS35...
gray UK 1,5 N 3005837 50
blue UK 1,5 N BU 3005840 50
Accessories
1
)
Cover, width 1.5 mm gray D-UK 2,5 3001022 50
blue D-UK 2,5 BU 3001103 50
Cover, width 1.8mm gray
blue
Fixed bridge, insulated
10 silver FBRN 10-4 N 12 A 3001624 10
Insertion bridge, insulated
10 gray
Switch bar for 2 terminal blocks, complete, to increase
insulation an end cover must be interposed
2 silver
Isolator bridge bar, can be separated, with 10 screws, for
switchable branches with IS-K...
10 silver
Bridge bar isolator, as distance piece for isolator
bridge bar
gray
Separating disk, for separation of neighboring
bridges, can be fitted later, no loss of pitch
gray
Partition plate, 1.5mm wide gray ATP-UK 3003224 50
Test socket silver
Test socket, insulated, can be used only with FBI
and ISSBI
silver
Screwdriver SZS 0,4X2,5 VDE 1205037 10
Lateral groove marking ZB 4 (see Catalog 5)
360 PHOENIX CONTACT
UK ... feed-through terminal blocks
Notes:
For more insertion bridges, visit phoenixcontact.net/products
1
) For information on installation and using accessories for Ex
applications, see page 602.
– The UK series of universal screw terminal
blocks possesses typical features which
are crucial to practical use
– Universal foot which can be used on DIN
rails NS35... and NS32...
– Potential distribution alternatively via
fixed bridges in the terminal center or
insertion bridges in the clamping space.
– High bridge currents
High-current terminal blocks up to
240mm
The UKH high-current terminal blocks up
to 240mm can be found in the section on
UT... screw connection terminal blocks
CLIPPROJECTPlanning enables the
quick and convenient planning and
configuration of fault-free terminal strips.
Terminal blocks
UK universal terminal blocks
1.5 (1.5) mm², 17.5 A, feed-through terminal
block