Datasheet

For further information and full technical data, visit phoenixcontact.net/products
Flexible jumper system
The same jumper for all connection
technologies. To allow fast and individual
potential distribution, the terminal blocks in
the CLIPLINE complete system have two
function shafts. These are arranged in one
line over all the terminal blocks, allowing for
a combination of connection technologies.
The 2- to 50-pos. jumpers make it possible
to implement all the tasks of potential
bridging within a very short time. Reducing
bridges connect, for example, UT... screw
terminal blocks and ST... spring-cage termi-
nal blocks.
The plug-in switching jumpers make
contact by being securely latched into the
function shaft. They create a removable
connection between neighboring terminal
blocks.
Plug-in connection solutions
The COMBI connection system enables
the time-saving and modular configuration
of your application. Like the terminal
blocks, the COMBI connectors are available
with screw, spring-cage, push-in, and fast
connection technologies.
The nominal data of up to 41 A and
1000 V has made a connection system for
signal and power wiring possible. The sys-
tem meets the most stringent of vibration
requirements. Both the terminal blocks and
the plugs are touch proof.
Extensive accessories are available,
from latching mechanisms to shield connec-
tions.
Multifunctional disconnect zone
All disconnect terminal blocks in the
CLIPLINE complete system have a stan-
dardized disconnect zone. Various function
plugs are available for use in the disconnect
terminal blocks. Isolating plugs are used for
simple disconnection. The fuse plugs are de-
signed for the use of cartridge fuse-links.
The patented component connector allows
you to mount components quickly, without
the risk of polarity reversal, and without the
need for soldering.
Large-surface marking
All the terminal points of the terminal
blocks in the CLIPLINE complete system
have large-surface marking options. This is a
precondition for clear wiring and startup
and simplifies assignment during testing and
maintenance work. Optional large-surface
snap-on marker carriers are available for
group and terminal strip marking.
Standardized test system
A comprehensive range of test accesso-
ries is available in the CLIPLINE complete
system. All test plugs make contact in the
freely accessible function shaft. For individ-
ual measuring lines, a 2.3 mm diameter
test plug is available. More complex testing
tasks can be implemented using alignable
test plugs. The corresponding spacers can
be used to assemble individual test adapters
perfectly suited for use in test laboratories.
General
The CLIPLINE complete system offers you a uniform range of accessories for all
connection technologies. Marking and test accessories are standardized and reduce
logistics costs. In addition, all terminal blocks of the CLIPLINE complete system can be
freely combined with each other using the double function shaft. The standardized plug-
in zone of the COMBI basic terminal blocks also allows the connection of modules via
individually configurable plugs, regardless of the connection technology.
CLIPLINE complete terminal blocks with screw, spring-cage, push-in, bolt, and plug-
in connections enable you to react flexibly to the demands of your customers anywhere
in the world.
Testing
Marking
Disconnecting
Inserting
Jumpering
17 PHOENIX CONTACT
CLIPLINE complete system features
CLIPLINE complete