Datasheet

ManualsBrandsPHOENIX CONTACT ManualsPhoenix ContactInstallation ground terminal block UTI 16-PE

https://www.phoenixcontact.com/hq/products/3073830

01/31/2017Page1/12

Installation ground terminal block-UTI 16-PE-3073830

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's

documentation. Our General Terms of Use for Downloads are valid

(http://phoenixcontact.com/download)

Installation ground terminal block, Connection method:Screw connection, Number of positions:1, Cross

section: 6 mm²-25 mm², AWG:10-4, Width:12.2 mm, Height:49.9 mm, Color:green-yellow, Mounting

type:NS 35/7,5,NS 35/15

Why buy this product

The installation terminal block features a particularly low-profile design and is suitable for wiring in flat installation distributors

The asymmetrical arrangement of the terminal blocks on the DIN rail enables the neutral busbar to be routed past the terminal blocks

Key Commercial Data

Packing unit 50 STK

GTIN

GTIN 4046356347259

Custom tariff number 85369010

Technical data

General

Number of positions 1

Number of levels 1

Number of connections 2

Potentials 1

Nominal cross section 16 mm²

Color green-yellow

Insulating material PA

Flammability rating according to UL 94 V2

Rated surge voltage 6 kV

Degree of pollution 3

Overvoltage category III

Insulating material group I

Open side panel No

Summary of content (12 pages)

PAGE 1
https://www.phoenixcontact.com/hq/products/3073830 Installation ground terminal block - UTI 16-PE - 3073830 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Installation ground terminal block, Connection method: Screw connection, Number of positions: 1, Cross section: 6 mm² - 25 mm², AWG: 10 - 4, Width: 12.
PAGE 2
https://www.phoenixcontact.com/hq/products/3073830 Installation ground terminal block - UTI 16-PE - 3073830 Technical data General Terminal block mounting 1.5 Nm ... 1.8 Nm (PE foot with mounting screw, M4) Oscillation, broadband noise test result Test passed Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03 Test spectrum Service life test category 1, class B, body mounted Test frequency f1 = 5 Hz to f2 = 150 Hz ASD level 0.
PAGE 3
https://www.phoenixcontact.com/hq/products/3073830 Installation ground terminal block - UTI 16-PE - 3073830 Technical data Connection data Conductor cross section flexible, with ferrule with plastic sleeve max. 16 mm² 2 conductors with same cross section, solid min. 2.5 mm² 2 conductors with same cross section, solid max. 10 mm² 2 conductors with same cross section, stranded min. 2.5 mm² 2 conductors with same cross section, stranded max.
PAGE 4
https://www.phoenixcontact.com/hq/products/3073830 Installation ground terminal block - UTI 16-PE - 3073830 Approvals EAC  7500651.22.01.00246 Accessories Accessories DIN rail DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length: 2000 mm DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, material: Steel, unperforated, height 7.
PAGE 5
https://www.phoenixcontact.com/hq/products/3073830 Installation ground terminal block - UTI 16-PE - 3073830 Accessories DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail, material: Galvanized, perforated, height 7.
PAGE 6
https://www.phoenixcontact.
PAGE 7
https://www.phoenixcontact.
PAGE 8
https://www.phoenixcontact.com/hq/products/3073830 Installation ground terminal block - UTI 16-PE - 3073830 Accessories End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray End clamp - CLIPFIX 35-5 - 3022276 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.
PAGE 9
https://www.phoenixcontact.com/hq/products/3073830 Installation ground terminal block - UTI 16-PE - 3073830 Accessories Zack marker strip - ZB 12 CUS - 0824942 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, Mounting type: Snap into tall marker groove, for terminal block width: 12.2 mm, Lettering field: 10.5 x 12.
PAGE 10
https://www.phoenixcontact.com/hq/products/3073830 Installation ground terminal block - UTI 16-PE - 3073830 Accessories Power terminal block - EK 135 - 0401023 Power terminal block, Connection method Screw connection, Load current : 125 A, Cross section: 0.75 mm² - 35 mm², Width: 12 mm, Color: aluminum color Screwdriver tools Screwdriver - SZS 1,0X6,5 VDE - 1205079 Screwdriver, slot-headed, VDE insulated, size: 1.0 x 6.
PAGE 11
https://www.phoenixcontact.com/hq/products/3073830 Installation ground terminal block - UTI 16-PE - 3073830 Accessories Marker card - SBS10:UNBEDRUCKT - 1007248 Marker card, Card, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, Perforated, Mounting type: Snap into tall marker groove, Snap into flat marker groove, for terminal block width: 10 mm, Lettering field: 6 x 10.
PAGE 12
https://www.phoenixcontact.com/hq/products/3073830 Installation ground terminal block - UTI 16-PE - 3073830 Accessories Warning label - WS 5-12 - 0805315 Warning plate, with 2 plastic screws, across 5 terminal blocks, pitch 12 mm Phoenix Contact 2017 © - all rights reserved http://www.phoenixcontact.