Datasheet

    
Technical data Technical data
Rated data IEC UL CSA IEC/
EN60079-7
IEC UL CSA IEC/
EN60079-7
Rated voltage [V] 250 300 300 - - 300 - -
Nominal current / cross section [A] / [mm²] 6.3 6.3 / - 10 / - - 16 10 / - - -
Rated cross section [mm²]---- ----
Cross section range AWG---- -30-14--
General data
Tightening torque [Nm] - 0.5 - 0.6
Insulating material PA PA
Inflammability class according to UL 94 V2 V0
Ordering data Ordering data
Description  Color Type  Order No.
Pcs. /
Pkt.
Type  Order No.
Pcs. /
Pkt.
Fuse plug, for cartridge fuse inserts 5 x 20 mm,
26.5 mm high, max 6.3 A
black ST-SI-UK 4 0921011 50
Fuse plug, for cartridge fuse inserts,
5 x 20 mm, 26.5 mm high, max. 6.3 A, with LED
display, for 5-15 V AC/DC
1
)
black ST-SILED 12-UK 4 0921024 50
With LED for 15-30 V AC/DC black ST-SILED 24-UK 4 0921037 50
With LED for 30-60 V AC/DC black ST-SILED 60-UK 4 0921040 50
With LED for 110-250 V AC/DC black ST-SILA250-UK 4 0921053 50
Component connector, for switching on 2-pos.
components into the basic terminal block, fixing at
screw terminal points, 19mm high, max 16A
3
)
gray ST-BE 2802316 10
Component connector, to connect 2-pos.
components into the basic terminal block, 19 mm
high, with LED for 24 V AC/DC
gray ST-BE-LA 24 2802374 10
With LED for 230 V AC/DC gray ST-BE-LA230 2802387 10
Component connector, to connect 2-pos.
components into the basic terminal block, with
diode 1N 4007, 19 mm high
2
)
gray ST-1N4007 2802329 10
Component plug, for 4-pos. components, two
basic terminal blocks required per plug, 19 mm
high
gray ST-BE-VP 2802332 10
Component plug, for 4-pos. components, two
basic terminal blocks required per plug, with bridge
rectifier B 250 C 1500, 19 mm high
4
)
gray ST-B250C1500 2802345 10
Isolating plug, 13.5 mm high, max. 16 A gray ST-K 4 5025462 50
Accessories Accessories
Plug pliers, simplify removing the isolating plug
from a closed row of terminal blocks
TZ 0306704 10
Center groove marking ZB 6 (see Catalog 5)
412 PHOENIX CONTACT
Terminal blocks
UK universal terminal blocks
Fuse plug for 5 x 20 mm cartridge fuses Component connector for 2 and 4-pos.
components
– The fuse plug ST-SI-UK4 for 5x20mm
cartridge fuse inserts is available with and
without a LED display
– The component connector ST–BE is
available as an individual connector for
two-pos. components and as a double
connector
Notes:
1
) If the fuse is faulty, the downstream circuit is not off load.
2
) Integrated: Diode 1N 4007, reverse voltage: 1300 V, maximum
continuous current: 1.0 A
3
) With single arrangement.
4
) Integrated: Rectifier module B 250 C 1500, reverse voltage:
600 V, nominal voltage: 250 V, nominal current: 1.5 A
Connectors for disconnect terminal
blocks in the UK series