Datasheet

   
Technical data
Dimensions Width Length Height NS 35/7,5
[mm] 9 53.3 47.1 9 53.3 - 13 53.3 47.1 13 53.3 -
Dimensions Width Length Height NS 32
[mm] 9 53.3 52.1 9 53.3 - 13 53.3 52.1 13 53.3 -
Dimensions Width Length Height
[mm] 9 53.3 - 9 53.3 37 13 53.3 - 13 53.3 37
Max. electrical data I
max.
[A]  U
max.
[V]  Max. Ø [mm²] AWG (UL)
32 800 0.1 - 6 - 32 800
IEC 60947-7-1 
Rated data IEC UL CSA IEC/
EN60079-7
Rated voltage [V] 800 600 - - 800
Nominal current / cross section [A] / [mm²] 32 / 4 30 / - - - 32 / 4 30 / - - - 57 / 10 45 / - - - 57 / 10 45 / - - -
Rated cross section [mm²]4--- 4--- 10--- 10---
Cross section range AWG 26 - 10 - - - 26 - 10 - - - 26 - 8 - - - 26 - 8 - - -
Connection capacity, DIN 46234
Cable lugs, DIN 46234 [mm²] 0.1 - 6
Connection bolt / hole diameter / width [mm] 4 / 4.3 / 8
Connection capacity, DIN 46237
Cable lugs, DIN 46237 [mm²] 0.5 - 2.5
Connection bolt / hole diameter / width [mm] 4 / 4.3 / 8
Color code red 1.00 mm²
blue 2.50 mm²
yellow
General data
Bolt thread M4
Tightening torque [Nm] 1.2 - 1.4
Insulating material PA
Inflammability class according to UL 94 V0
Ordering data
Description
No. of
pos.
Color Type I
max
Order No.
Pcs. /
Pkt.
Bolt connection terminal, for mounting on
NS32... or NS35...
gray RSC 4 3058127 50
Bolt connection/flange terminal block, for
direct mounting
gray
Block, 4-pos. gray
Block, 6-pos. gray
Block, 8-pos. gray
Block, 12-pos. gray
Accessories
Cover, width 2.2 mm gray D-RSC 5 3058020 50
Fixed bridge, insulated
10 silver FB 10-9 32 A 3059113 10
Isolator bridge bar, can be separated, with 10 screws
10 silver FB 10-9 ISO 24 A 3059650 10
Separating disk, for separation of neighboring
bridges, can be fitted later, no loss of pitch
gray TS-KK 3 2770215 50
Cover profile, supply length 1m transparent AP RSC 3058017 10
Screwdriver SZS 1,0X6,5 VDE 1205079 10
SZK PH2 VDE 1205163 10
Center groove marking ZB 9 (see Catalog 5)
Lateral groove marking ZBF 9 (see Catalog 5)
486 PHOENIX CONTACT
RSC ... screw terminal blocks, for M4
and M5 ring and fork-type cable lugs
Notes:
1
) 57A for continuous bridging, 41A for bridging between non-
adjacent terminal blocks
2
) Rated voltage for 630V open disconnect point
– Compact screw connection of ring and
fork-type cable lugs
– Bridge shaft for potential distribution
using standard screw bridges
– The isolator bridge bar supports
switchable cross connections; the bridge
screw therefore has the function of a live
contact
– Mounting on standard DIN rails or
directly in control boxes
– Cover profile that can be snapped directly
onto the terminal blocks provides touch-
proof protection
– Large-surface, seamless external and
center marking
– Screw nuts and current bars are latched in
the insulating housing and cannot be
removed
Terminal blocks
RBO and RSC bolt connection terminal blocks
4 (6) mm², 32 A, feed-through terminal block 4 (6) mm², 32 A, feed-through terminal block,