Datasheet

2
1
3
445 67 8
Dimensions
[mm]
Max. electrical data
Rated data
Rated voltage [V] 1000 - 1000 - 1000 - 1000 - 1000 - 1000 -
Nominal current / cross section [A] / [mm²] 125 / 35 - 120 / - - 150 / 50 - 130 / - - 269 / 120 - 225 / - -
Rated cross section [mm²] 35--- 50--- 120---
Cross section range AWG 14 - 2 - -4 - 14 - 1/0 - -3 - 10 - 250 kcmil - -00 -
Connection capacity, bolt connection
Cable lugs, DIN 46234 [mm²] 2.5 - 35 2.5 - 50 6 - 120
Cable lugs, DIN 46235 [mm²] 6 - 35 6 - 35 10 - 95
Cable lugs, DIN 46237 [mm²] 2.5 - 6 - 10 - 6
General data
Bolt length [mm] 16 21 26
Screw thread
Tightening torque [Nm] 3 - 6 6 - 12 10 - 20
Insulating material
Inflammability class according to UL 94 V0 V0 V0
Description
No. of
pos.
Color
High-current connectors, for mounting on
NS 35...
gray
Connection rail, for cross connection of high-current connectors
2 silver
3 silver
Reducing bridge, for connecting HVM8/1 to HVM6/1
2 silver
Reducing bridge, for connecting HVM10/1 to HVM6/1
3 silver
Separating plate gray
Cover gray
Adhesive warning plate, self-adhesive, black
print: lightning flash with mixed version: "Vorsicht
Spannung – Attention Danger" size of label:
13 x 23.5 mm
yellow
Adhesive warning plate, self-adhesive, black
print: lightning flash with mixed version: "Vorsicht
Spannung – Attention Danger" size of label:
32 x 26 mm
yellow
End bracket, for snapping onto NS35, 5.15 mm
wide, can be marked with ZB 5 and
UCT-EM(30X5), parking option for bridges and
test plugs
gray
End bracket, aluminum, for screwing on, for end
support of 50 - 300mm² terminal blocks, can be
marked with ZB10, for mounting on NS35...
silver
Lateral groove marking
490 PHOENIX CONTACT
– Secure connection of up to 4 conductors
with cable lugs according to DIN46234,
46235 and 46237 in very tight spaces
– Spring washers are used to prevent
hexagonal nuts from loosening
– Extensive range of accessories for safe
and comfortable wiring of conductors up
to 120mm
– Two and three-pos. connection rails are
available for potential distribution
– The feed-through window provided in the
partition plates can be easily removed for
mounting the connection rails
– Two different partition plates can be used
for the family of single and twin bolt
terminal blocks
– Marking the partition plates allows their
height and length to be adapted at the
respective bolt terminal blocks
① CLIPFIX35-5 end bracket
② HVM12/1-TP partition plate
③ HVM5/1 or
HVM6/1 high-current connectors
④ HV M12/2-TP partition plate
⑤ HV M8/1, HVM10/1 or HVM12/1 high-
current connectors
⑥ HV M6/2, HVM8/2 or HVM10/2 high-
current connectors
⑦ HVM10/1-AP cover
⑧ E/AL-NS 35 end bracket
HV ... high-current connector
Terminal blocks
RBO and RSC bolt connection terminal blocks