Datasheet
Product range overview
1.5mm
Feed-through, multi-conductor, and multi-level terminal blocks
and ground terminals
87
Initiator/actuator terminal blocks 89
Knife disconnect terminal blocks 90
Marshalling terminals 92
Marshalling patchboards 99
Desk-design terminal blocks 108
Mini feed-through terminal blocks and ground terminals 109
2.5mm
Feed-through, multi-conductor, and multi-level terminal blocks
and ground terminals
111
Disconnect and knife disconnect terminal blocks 113
Diode terminal blocks 121
Hybrid terminal blocks with screw connection on one side 123
Desk-design terminal blocks 124
Desk-design disconnect and knife disconnect terminal blocks 125
Installation terminal blocks 126
Mini feed-through terminal blocks and ground terminals 131
4mm
Feed-through, multi-conductor, and multi-level terminal blocks
and ground terminals
133
Fuse terminal blocks 134
Disconnect and knife disconnect terminal blocks 135
Test disconnect terminal blocks 136
Diode terminal blocks 137
Hybrid terminal blocks with screw connection on one side 137
Installation terminal blocks 138
6mm
Feed-through, multi-conductor, and multi-level terminal blocks
and ground terminals
141
Test disconnect terminal blocks 142
Hybrid terminal blocks with screw connection on one side 143
Installation terminal blocks 145
10mm
Feed-through and multi-conductor terminal blocks and ground
terminals
147
Fuse terminal blocks 147
16mm
Feed-through and multi-conductor terminal blocks and ground
terminals
149
PTPOWER Power-Turn high-current terminal blocks
35mm-150mm
150
79
PHOENIX CONTACT
The PT... push-in connection terminal
blocks from the CLIPLINE complete system
have been developed for direct conductor
connection and offer a wide range of
application options. Easy handling and
direct, tool-free connection with up to
50 percent lower insertion forces are the
key advantages of this terminal technology.
When solid conductors from 0.25mm or
conductors with ferrules from 0.34mm are
inserted, the contact spring is automatically
opened and provides the required pressure
force against the current bar.
The integrated actuation lever allows you
to release conductors or to connect small
conductor cross sections from 0.14mm
with any type of tool - easily and without
direct contact with live parts.
The PT... connection technology has been
tested and approved for a range of
approvals. These include, for example,
vibration resistance according to railway
standard EN50155 and shock and
corrosion resistance according to current
shipbuilding registers. It is also certified for
process engineering in areas with increased
safety (Exe).
PT... push-in connection terminal blocks