Datasheet

https://www.phoenixcontact.com/us/produkte/3074088
Nov 9, 20131/15
Installation terminal block-UTI 35-3074088
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
Installation terminal block, Screw connection, Cross section: 0.75 mm²-35 mm², AWG:18-2,
Width:15.2 mm, Color:gray, Mounting type:NS 35/7,5,NS 35/15

Product Features
The installation terminal block features a particularly low-profile design and is suitable for wiring in flat installation distributors
The asymmetrical arrangement of the terminal blocks on the DIN rail enables the neutral busbar to be routed past the terminal
blocks
Key commercial data
package_quantity
50
GTIN
4046356347266
Technical data
General
Number of levels
1
Number of connections
2
Color
gray
Insulating material
PA
Inflammability class according to UL 94
V2
General
Maximum load current
125 A (with 35 mm² conductor cross section)
Rated surge voltage
8 kV
Pollution degree
3
Surge voltage category
III
Insulating material group
I
Connection in acc. with standard
IEC 60947-7-1
Nominal current I
N
125 A
Nominal voltage U
N
800 V
Open side panel
nein
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Finger protection
guaranteed
Surge voltage test setpoint
9.8 kV
Result of surge voltage test
Test passed