Datasheet

ManualsBrandsPHOENIX CONTACT ManualsPhoenix ContactGround modular terminal block USLKG 35 N

https://www.phoenixcontact.com/hq/products/3074143

01/30/2017Page1/11

Ground modular terminal block-USLKG 35 N-3074143

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's

documentation. Our General Terms of Use for Downloads are valid

(http://phoenixcontact.com/download)

Ground modular terminal block, Connection method:Screw connection, Cross section: 10 mm²-35 mm²,

AWG:8-2, Width:16 mm, Color:green-yellow, Mounting type:NS 35/7,5,NS 35/15

Key Commercial Data

Packing unit 50 STK

GTIN

GTIN 4046356347303

Custom tariff number 85369010

Technical data

General

Number of levels 1

Number of connections 2

Potentials 1

Nominal cross section 35 mm²

Color green-yellow

Insulating material PA

Flammability rating according to UL 94 V0

Rated surge voltage 8 kV

Degree of pollution 3

Overvoltage category III

Insulating material group I

Maximum load current 125 A

Nominal current I

125 A

Open side panel No

Terminal block mounting 2.5 Nm ... 3 Nm (PE foot with mounting screw, M5)

Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11

Summary of content (11 pages)

PAGE 1
https://www.phoenixcontact.com/hq/products/3074143 Ground modular terminal block - USLKG 35 N - 3074143 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.
PAGE 2
https://www.phoenixcontact.com/hq/products/3074143 Ground modular terminal block - USLKG 35 N - 3074143 Technical data General Back of the hand protection Not guaranteed Finger protection Not guaranteed Oscillation, broadband noise test result Test passed Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03 Test spectrum Service life test category 1, class B, body mounted Test frequency f1 = 5 Hz to f2 = 150 Hz ASD level 1.
PAGE 3
https://www.phoenixcontact.com/hq/products/3074143 Ground modular terminal block - USLKG 35 N - 3074143 Technical data Connection data Note Please observe the current carrying capacity of the DIN rails. Connection method Screw connection Connection in acc. with standard IEC 60947-7-2 Conductor cross section solid min. 10 mm² Conductor cross section solid max. 35 mm² Conductor cross section AWG min. 8 Conductor cross section AWG max. 2 Conductor cross section flexible min.
PAGE 4
https://www.phoenixcontact.com/hq/products/3074143 Ground modular terminal block - USLKG 35 N - 3074143 Circuit diagram Approvals Approvals Approvals EAC / EAC / UL Recognized / cUL Recognized / cULus Recognized Ex Approvals Approval details EAC  7500651.22.01.00246 EAC  EAC-Zulassung UL Recognized  mm²/AWG/kcmil cUL Recognized mm²/AWG/kcmil cULus Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm B C D 8-2 8-2 8-2  http://database.ul.
PAGE 5
https://www.phoenixcontact.com/hq/products/3074143 Ground modular terminal block - USLKG 35 N - 3074143 Accessories Cover profile - AP 3 CM - 5022876 Cover profile for covering terminal strips, snaps onto AP 3-TU, AP 3-TNS 35 cover profile carriers, can be labeled with AP-ES insert strip. A cover profile carrier is to be positioned at the ends and at intervals of around approx. 40 cm.
PAGE 6
https://www.phoenixcontact.com/hq/products/3074143 Ground modular terminal block - USLKG 35 N - 3074143 Accessories DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, material: Steel, unperforated, height 7.
PAGE 7
https://www.phoenixcontact.com/hq/products/3074143 Ground modular terminal block - USLKG 35 N - 3074143 Accessories DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.
PAGE 8
https://www.phoenixcontact.com/hq/products/3074143 Ground modular terminal block - USLKG 35 N - 3074143 Accessories DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602 DIN rail 35 mm (NS 35) DIN rail - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail 35 mm (NS 35) DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, deep drawn, high profile, unperforated, 1.
PAGE 9
https://www.phoenixcontact.com/hq/products/3074143 Ground modular terminal block - USLKG 35 N - 3074143 Accessories DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15 End block End clamp - E/UK - 1201442 End clamp, Width: 9.5 mm, Height: 35.3 mm, Length: 50.
PAGE 10
https://www.phoenixcontact.com/hq/products/3074143 Ground modular terminal block - USLKG 35 N - 3074143 Accessories End clamp - CLIPFIX 35-5 - 3022276 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray End clamp - E/NS 35 N - 0800886 End clamp, width: 9.
PAGE 11
https://www.phoenixcontact.com/hq/products/3074143 Ground modular terminal block - USLKG 35 N - 3074143 Accessories Marker for terminal blocks - UCT-TM 16 CUS - 0829637 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type: Snap into tall marker groove, for terminal block width: 16 mm, Lettering field: 14.8 x 9.6 mm Screwdriver tools Screwdriver - SZS 1,0X6,5 VDE - 1205079 Screwdriver, slot-headed, VDE insulated, size: 1.0 x 6.