Datasheet

https://www.phoenixcontact.com/us/produkte/3076031
Nov 14, 20131/17
Installation level terminal block-UTI 2,5-L/L-3076031
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
Installation level terminal block, Screw connection, Cross section: 0.2 mm²-4 mm², AWG:24-12,
Width:5.2 mm, Color:gray, Mounting type:NS 35/7,5,NS 35/15

Product Features
The installation terminal block features a particularly low-profile design and is suitable for wiring in flat installation distributors
The asymmetrical arrangement of the terminal blocks on the DIN rail enables the neutral busbar to be routed past the terminal
blocks
Key commercial data
package_quantity
50
GTIN
4046356643962
Technical data
General
Note
Assembly instructions:For secure fastening of the neutral busbar,
supports must be set at the beginning and end of each terminal
strip as well as every 20cm on longer terminal strips.
Number of levels
3
Number of connections
4
Color
gray
Insulating material
PA
Inflammability class according to UL 94
V0
General
Maximum load current
30 A (with 4 mm² conductor cross section and 3-pos. terminal
block)
Maximum load current
24 A (with 2.5 mm² conductor cross section)
Current carrying capacity of the neutral busbar
140 A
Rated surge voltage
4 kV
Rated surge voltage
6 kV
Pollution degree
3
Surge voltage category
III
Insulating material group
I
Nominal current I
N
24 A (with 4 mm² conductor cross section)
Nominal voltage U
N
400 V (phase conductor/phase conductor)
Open side panel
ja