Datasheet

https://www.phoenixcontact.com/us/produkte/3206490
Nov 9, 20131/17
Disconnect terminal block-QTC 2,5-TG-3206490
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
Disconnect terminal block, Connection type:Quick connection, Cross section: 0.5 mm²-2.5 mm²,
AWG:20-14, Nominal current:20 A, Nominal voltage:400 V, Length:82.5 mm, Width:6.2 mm,
Color:gray, Assembly:NS 35/7,5, NS 35/15

Product Features
Tested for railway applications
The P-CO(3) component plug is used to accommodate different components such as resistors or diodes
The P-DI (2) isolating plug can be used in all disconnect terminal blocks. Following disconnection, the P-DI can be "parked" back to
front in the basic terminal block.
The insulated P-FIX(1) feed-through connector enables the installation of a feed-through terminal of the same shape
Triple bridge shaft enables individual potential distribution and supply
Key commercial data
package_quantity
50
GTIN
4046356057677
Technical data
General
Note
Current and voltage are determined by the plug used.
Number of levels
1
Number of connections
2
Color
gray
Insulating material
PA
Inflammability class according to UL 94
V0
Area of application
Railway industry
Area of application
Mechanical engineering
Area of application
Plant engineering
General
Maximum load current
20 A (with 2.5 mm² conductor cross section)
Rated surge voltage
6 kV
Pollution degree
3
Surge voltage category
III
Insulating material group
I
Connection in acc. with standard
IEC 60947-7-1
Nominal current I
N
20 A