Datasheet


 
Technical data
Dimensions Width Length Height NS 35/7,5
[mm] 17 80.8 49.8 17 80.8 - 13 79.9 49.8 13 79.9 -
Dimensions Width Length Height NS 32
[mm] 17 80.8 54.8 17 80.8 - 13 79.9 54.8 13 79.9 -
Dimensions Width Length Height
[mm] 17 80.8 - 17 80.8 39.7 13 79.9 - 13 79.9 39.7
Max. electrical data I
max.
[A]  U
max.
[V]  Max. Ø [mm²] AWG (UL)
125 800 2.5 - 35 - 125 800 2.5 - 35 - 50 800
IEC 60947-7-1 
Rated data IEC UL CSA IEC/
EN60079-7
Rated voltage [V] 800 600 600 - 800 600 600 - 800
Nominal current / cross section [A] / [mm²] 125 / 35 115 / - 115 - 125 / 35 115 / - 115 - 50 / 10 45 / - - - 50 / 10 45 / - - -
Rated cross section [mm²]35--- 35--- 10--- 10---
Cross section range AWG 12 - 2 - 12 - 2 - 12 - 2 - 12 - 2 - 26 - 8 - - - 26 - 8 - - -
Connection capacity, DIN 46234
Cable lugs, DIN 46234 [mm²] 6 - 35
Connection bolt / hole diameter / width [mm] 6 / 6.5 / 15
Connection capacity, DIN 46237
Cable lugs, DIN 46237 [mm²] 2.5 - 6
Connection bolt / hole diameter / width [mm] 6 / 6.5 / 11
Color code red
blue 2.50 mm²
yellow 6.00 mm²
General data
Disconnect slide: thread / torque - / [Nm] - / -
Bolt thread M6
Tightening torque [Nm] 3.2 - 3.7
Insulating material PA
Inflammability class according to UL 94 V0
Ordering data
Description
No. of
pos.
Color Type I
max
Order No.
Pcs. /
Pkt.
Bolt connection terminal, for mounting on
NS32... or NS35...
gray RSC 6 3075870 40
Bolt connection/flange terminal block, for
direct mounting
gray
Test disconnect terminal block, for mounting on
NS 35 and NS32
gray
Test disconnect terminal block, with flange, for
direct mounting
gray
Accessories
Cover, width 2.2 mm gray D-RSC 6 3213098 50
Fixed bridge, insulated
10 silver FB 10-17 57 A 3075951 10
Isolator bridge bar, can be separated, with 10 screws
10 silver FB 10-17 ISO 57 A 3213085 10
Separating disk, for separation of neighboring
bridges, can be fitted later, no loss of pitch
gray TS-KK 3 2770215 50
Cover profile, supply length 1m transparent AP RSC-T 3059139 10
Screwdriver
Center groove marking ZB 17 (see Catalog 5)
Lateral groove marking ZBF 17 (see Catalog 5)
488 PHOENIX CONTACT
RSC 6 ..., M6 screw terminal blocks
and RSC 5-T..., M5 test disconnect
terminal blocks
Notes:
1
) 57A for continuous bridging, 41A for bridging between non-
adjacent terminal blocks
2
) Rated voltage for 630V open disconnect point
– Flange terminal blocks for direct
mounting in control boxes
– Compact screw connection of ring and
fork-type cable lugs
– Bridge shaft for potential distribution
using standard screw bridges
– The isolator bridge bar supports
switchable cross connections; the bridge
screw therefore has the function of a live
contact
– Cover profile that can be snapped directly
onto the terminal blocks provides touch-
proof protection
– Large-surface, seamless external and
center marking
– Screw nuts and current bars are latched in
the insulating housing and cannot be
removed
– Easy grouping of flange terminal blocks,
see figure below
Terminal blocks
RBO and RSC bolt connection terminal blocks
35 (35) mm², 125 A, feed-through terminal
block