Terminal Blocks 2015 / 2016 3
Terminal blocks Sensor/actuator cabling and industrial connectors Interface technology and switching devices • Sensor/actuator cabling • Cables and lines • Connectors • Electronic switching devices and motor control • Measurement and control technology • Monitoring • Relay modules • System cabling for controllers Marking systems, tools, and mounting material Control technology, I/O systems, and automation infrastructure • Marking and labeling • Tools • Installation and mounting material • Lighting a
Table of contents Product range overview in pictures 4 From here, you can access the desired product directly System features 15 CLIPLINE complete Terminal blocks UT... screw connection terminal blocks 25 PT... push-in connection terminal blocks 79 ST... spring-cage connection terminal blocks 161 QT... fast connection terminal blocks 209 COMBI plug-in connection solutions 225 RT... bolt connection terminal blocks 323 Accessories 337 UK...
Product range in pictures From here, you can access the desired product directly UT... screw connection terminal blocks Page 25 Disconnect terminal blocks 2.5 mm² ... 4 mm² ... 6 mm² ... Page 33 Page 45 Page 54 Feed-through, multi-conductor, and multilevel terminal blocks and ground terminals 2.5 mm² ... Page 30 4 mm² ... Page 40 6 mm² ... Page 52 10 mm² ... 16 mm² ... 35 mm² ... 50 mm² - 240 mm² Page 60 Page 62 Page 64 Page 66 Knife disconnect terminal blocks 2.5 mm² ... 4 mm² ... 6 mm² ...
Product range in pictures From here, you can access the desired product directly Four-conductor terminal blocks 2.5 mm² ... 4 mm² ... Page 31 Page 41 Installation terminal blocks 2.5 mm² ... 4 mm² ... 6 mm² ... 10 mm² ... Page 36 Page 51 Page 58 Page 61 10 mm² ... 16 mm² ... Marshalling terminals 2.5 mm² ... Page 147 Page 149 Page 92 Double-level terminal blocks 2.5 mm² ... 4 mm² ... Page 31 Page 42 16 mm² ... 35 mm² ... Page 63 Page 65 Three-level terminal blocks 2.5 mm² ... 4 mm² ...
Product range in pictures From here, you can access the desired product directly Feed-through terminal blocks and ground terminals, desk design 1.5 mm² ... Page 108 2.5 mm² ... Page 124 Three-conductor terminal blocks, desk design 1.5 mm² ... Page 108 2.5 mm² ... Page 124 Four-conductor terminal blocks, desk design 1.5 mm² ... Page 108 2.5 mm² ... Page 124 Double-level terminal blocks, desk design 1.5 mm² ... Page 108 2.5 mm² ...
Product range in pictures From here, you can access the desired product directly PTPOWER Installation terminal blocks 2.5 mm² ... 4 mm² ... 6 mm² ... Page 126 Page 138 Page 145 10 mm² ... 16 mm² ... Page 201 Page 205 Diode terminal blocks 2.5 mm² ... 4 mm² ... Page 178 Page 190 Installation terminal blocks 10 mm² ... 16 mm² ... 35 mm² ... Page 201 Page 205 Page 207 Multi-level installation terminal blocks 2.5 mm² ... Page 127 4 mm² ...
Product range in pictures From here, you can access the desired product directly QT... fast connection terminal blocks Page 209 Feed-through and multi-conductor terminal blocks 1.5 mm² ... Page 214 2.5 mm² ... Page 220 Three-conductor terminal blocks 1.5 mm² ... Page 215 2.5 mm² ... Page 221 Four-conductor terminal blocks 1.5 mm² ... Page 215 2.5 mm² ... Page 221 COMBI plug-in connection solutions Hybrid terminal blocks with spring-cage connection on one side 1.5 mm² ... Page 219 2.5 mm² ...
Product range in pictures From here, you can access the desired product directly Double-level terminal blocks 1.5 mm² ... Fuse terminal blocks 2.5 mm² ... Page 222 Test disconnect terminal blocks 4 mm² ... Page 243 Headers 2.5 mm² ... 4 mm² ... Page 237 Page 245 Connectors with push-in connection assembled and for self-assembly 1.5 mm² ... Page 260 2.5 mm² ... Page 268 4 mm² ... Page 273 6 mm² ... Page 280 Latching and strain relief PR ..., PRZ ...
Product range in pictures From here, you can access the desired product directly RT... bolt connection terminal blocks Page 323 Feed-through terminal blocks 2.5 mm² ... 6 mm² ... 35 mm² ... Page 328 Page 330 Page 334 Feed-through terminal blocks, open design 2.5 mm² ... Page 329 6 mm² ... Page 331 35 mm² ... Page 335 Disconnect terminal blocks 6 mm² ... Page 333 UK... universal terminal blocks Isolating plugs and component connectors P-... Page 350 Marker carriers/warning labels STP ...
Product range in pictures From here, you can access the desired product directly Accessories Page 337 Jumpers FBS ... FBSR ... Page 340 Page 342 Three- and four-conductor terminal blocks UK ...-TWIN Page 368 UDK ... Page 372 Double-level terminal blocks UKK ... Page 374 Knife disconnect terminal blocks MTK ... Page 416 UK ...MTK Page 417 Terminal blocks with spade connection UVKB 4-FS/FS ... Page 438 Test accessories PS ..., MPS ..., PAI ... Page 346 Fuse plugs P-FU...
Product range in pictures From here, you can access the desired product directly Ceramic terminal blocks SSK ... Page 450 Spring-assisted screw terminal blocks USST ... Page 454 Spring-assisted disconnect terminal blocks USST-T ... Page 458 Micro/mini terminal blocks MT 1,5 ... Bolt connection terminal block with disconnect function OTTA 6-T Page 476 Bolt connection terminal blocks for DIN rail and direct mounting RBO ... Page 478 Bolt connection terminal blocks with covering hood RBO ...
Product range in pictures From here, you can access the desired product directly Micro/mini terminal blocks MTTB 1,5 ... Page 465 Mini strip terminal blocks MBK ... Page 468 Double-level mini terminal blocks MBKKB ... Page 470 Bolt connection terminal blocks for DIN rail and direct mounting OTTA ... Page 473 High-current connectors HV M ... Page 491 High-current connectors UHV ... Page 494 Device terminal blocks G ..., GE ... Trunk line branch terminals UDB 2X...
PHOENIX CONTACT
CLIPLINE complete system features With CLIPLINE complete, the unique terminal block system from Phoenix Contact, the choice of connection technology is yours. The following connection methods are available: – Universal UT... screw connection – Simple PT... push-in connection – Compact ST...
CLIPLINE complete system features CLIPLINE complete CLIPLINE complete All connection technologies, one system 16 PHOENIX CONTACT
CLIPLINE complete system features CLIPLINE complete General The CLIPLINE complete system offers you a uniform range of accessories for all connection technologies. Marking and test accessories are standardized and reduce logistics costs. In addition, all terminal blocks of the CLIPLINE complete system can be freely combined with each other using the double function shaft.
CLIPLINE complete system features CLIPLINE complete System features - screw connection Material properties The metal parts of the UT... screw connection terminal blocks are made from high-grade, strain-crack, and corrosionproof copper alloys as a standard feature. This eliminates the possibility of electrolytic corrosion in the presence of moisture and the risk of rusting. The consequences, such as unreliable electrical contacts and/or jammed screws, are also prevented.
CLIPLINE complete system features CLIPLINE complete System features - push-in connection Material properties All metal parts of the push-in terminal blocks are made from corrosion-free materials. The conductive metals consist of high-grade copper alloys. A particular advantage is the low temperature rise due to good electrical conductivity. The surface of the metal parts is protected by lead-free, galvanic nickel or tin plating.
CLIPLINE complete system features CLIPLINE complete System features - spring-cage connection Material properties All metal parts of the spring-cage terminal blocks are made from corrosion-free materials. The conductive metals consist of high-grade copper alloys. A particular advantage is the low temperature rise due to good electrical conductivity. The surface of the metal parts is protected by lead-free, galvanic nickel or tin plating.
CLIPLINE complete system features CLIPLINE complete System features - fast connection Material properties The patented contact metals of the QT... fast connection terminal blocks are made from a special, high-grade copper alloy. This combines good electrical conductivity with excellent elastic characteristics. The surface of the metal parts is protected by lead-free, galvanic nickel or tin plating. The insulating housing of the fast connection terminal blocks is made from recyclable PA 6.6.
CLIPLINE complete system features CLIPLINE complete System features - bolt connection Material properties All metal parts of the bolt connection terminal blocks are made from corrosionfree materials. The conductive metals consist of high-grade copper alloys. Due to their good electrical conductivity, they ensure a low temperature rise. The surface of the metal parts is protected by lead-free, galvanic nickel or tin plating.
CLIPLINE complete system features CLIPLINE complete System features - plug-in connection Material properties All metal parts of the COMBI connectors are made from corrosion-free materials. The distinction between the electrical and mechanical functions is a particular advantage. The conductive metals consist of high-grade copper alloys. The surface of the metal parts is protected by lead-free, galvanic nickel or tin plating.
PHOENIX CONTACT
UT... screw connection terminal blocks The UT... screw connection terminal blocks from the CLIPLINE complete system satisfy the most stringent requirements and cover a wide area of application. They impress with their maintenance-free conductor connection and offer maximum flexibility with their multi-conductor connection. You can connect conductors with a nominal cross section either with or without ferrules.
Terminal blocks - CLIPLINE complete UT... screw connection terminal blocks Universal and zero-maintenance The screw connection is characterized by three main features. – Global standard – Multiple conductor connection – Zero maintenance thanks to Reakdyn principle. 26 PHOENIX CONTACT Snap-on PE foot Ground terminals of the same shape are simply snapped onto the DIN rail in order to make contact.
Terminal blocks - CLIPLINE complete UT... screw connection terminal blocks The reducing bridge enables terminal blocks with different nominal cross sections to be connected easily, e.g., a UT 10 terminal block to a UT 2,5. Power blocks can be created quickly using the reducing bridge. The double function shaft can be used to connect any number of terminal blocks with two-position bridges. The 2 to 50-pos. bridges allow up to 50 terminal blocks to be bridged in one step.
Terminal blocks - CLIPLINE complete UT... screw connection terminal blocks UT... feed-through, multi-conductor, and multi-level terminal blocks UT... multifunctional terminal blocks UT...
Terminal blocks - CLIPLINE complete UT... screw connection terminal blocks UTME... test disconnect terminal blocks MUT... miniature terminal blocks UTI...
Terminal blocks - CLIPLINE complete 2.5 mm2 UT... screw connection terminal blocks General technical data for 2.5 mm2 UT... screw connection terminal blocks Rated data Rated cross section Cross section range Connection capacity [mm²] AWG IEC 60947-7-1 / IEC 60947-7-2 2.5 26 - 12 solid stranded 1 conductor [mm²] 0.14 - 4 2 conductors (of the same type) [mm²] 0.14 - 1.5 2 stranded conductors with a TWIN ferrule [mm²] General data Stripping length [mm] 9 Screw thread M3 Tightening torque [Nm] 0.5 - 0.
Terminal blocks - CLIPLINE complete 2.5 mm2 UT... screw connection terminal blocks Feed-through, multi-conductor, and multi-level terminal blocks and ground terminals Notes: 1) ① ① ② ② For additional accessories and technical data, see page 30. For information on installation and using accessories for Ex applications, see page 602. 32 A, feed-through terminal block and ground terminal Ex: EAC Ex [mm] Max. electrical data Max.
Terminal blocks - CLIPLINE complete 2.5 mm2 UT... screw connection terminal blocks Feed-through, multi-conductor, and multi-level terminal blocks and ground terminals Notes: 1) ① ① ② ② For additional accessories and technical data, see page 30. ③ 28 A, double-level terminal block with PE foot 24 A, three-level terminal block and ground terminal Technical data1) Dimensions Max. electrical data Max.
Terminal blocks - CLIPLINE complete 2.5 mm2 UT... screw connection terminal blocks Disconnect and knife disconnect terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 30. 2) Current and voltage are determined by the plug used. 20 A, disconnect terminal block 20 A, double-level terminal block with disconnect zone Technical data1) Dimensions [mm] Max. electrical data Max.
Terminal blocks - CLIPLINE complete 2.5 mm2 UT... screw connection terminal blocks Disconnect and knife disconnect terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 30. 20 A, knife disconnect terminal block 24 A, double-level terminal block with disconnect knife Technical data1) Dimensions [mm] Max. electrical data Max.
Terminal blocks - CLIPLINE complete 2.5 mm2 UT... screw connection terminal blocks Diode and LED terminal blocks ① ① ② ② Notes: 1) For additional accessories and technical data, see page 30. 32 A, feed-through terminal block and ground terminal, same shape 0.5 A, diode terminal block, 1N 4007 (1300 V/0.5 A) Technical data1) Dimensions [mm] Max. electrical data Max. bridge current Rated data Rated voltage Nominal current / cross section [A] [V] [A] / [mm²] Width Length 5.2 57.8 Imax.
Terminal blocks - CLIPLINE complete 2.5 mm2 UT... screw connection terminal blocks Diode and LED terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 30. 2) The voltage is determined by the light indicator version selected. 28 A, double-level terminal block with LED display 28 A, double-level terminal block for soldering in components Technical data1) Dimensions Max. electrical data Max.
Terminal blocks - CLIPLINE complete 2.5 mm2 UT... screw connection terminal blocks Installation terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 30. 2) 3-pos. termination block. Assembly instruction: In order to securely fix the neutral busbar in place, support brackets must be placed at the beginning and end of each terminal strip as well as every 20 cm on longer terminal strips. The corresponding support brackets can be found at phoenixcontact.
Terminal blocks - CLIPLINE complete 2.5 mm2 UT... screw connection terminal blocks Installation terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 30. 2) 3-pos. termination block. 4 (4) mm², 30 A, three-level terminal block, 2 x L phase conductor 4 (4) mm², 24 A, three-level terminal block, 1 x L phase conductor, 1 x N conductor can be disconnected, 1 x PE Technical data1) Dimensions Max. electrical data Max.
Terminal blocks - CLIPLINE complete 2.5 mm2 UT... screw connection terminal blocks Mini feed-through terminal blocks and ground terminals ① Notes: 1) ② For additional accessories and technical data, see page 30. For information on installation and using accessories for Ex applications, see page 602. 32 A, feed-through terminal block and ground terminal Ex: SEV13ATEX0178U / IECEx SEV13.0012U Technical data1) Dimensions Max. electrical data Max.
Terminal blocks - CLIPLINE complete 4 mm2 UT... screw connection terminal blocks General technical data for 4 mm2 UT... screw connection terminal blocks Rated data Rated cross section Cross section range Connection capacity [mm²] AWG IEC 60947-7-1 / IEC 60947-7-2 / IEC 60947-7-3 4 26 - 10 solid stranded Ferrule without/with plastic sleeve 0.14 - 6 0.14 - 6 0.14 - 4 0.14 - 4 0.14 - 1.5 0.14 - 1.5 0.14 - 1.5 0.5 - 2.
Terminal blocks - CLIPLINE complete 4 mm2 UT... screw connection terminal blocks Feed-through, multi-conductor, and multi-level terminal blocks and ground terminals Notes: 1) ① ① ② ② For additional accessories and technical data, see page 40. For information on installation and using accessories for Ex applications, see page 602. 41 A, feed-through terminal block and ground terminal Ex: EAC Ex [mm] Max. electrical data Max.
Terminal blocks - CLIPLINE complete 4 mm2 UT... screw connection terminal blocks Feed-through, multi-conductor, and multi-level terminal blocks and ground terminals ① ① Notes: 1) ② For additional accessories and technical data, see page 40. For information on installation and using accessories for Ex applications, see page 602. ③ 37 A, 1000 V, feed-through terminal block, 4 connections Ex: Max. electrical data Max.
Terminal blocks - CLIPLINE complete 4 mm2 UT... screw connection terminal blocks Fuse terminal blocks and lever-type disconnect terminal blocks of the same shape Notes: 1) For additional accessories and technical data, see page 40. 2) If the fuse is faulty, the downstream circuit is not off load. 3) For max. power dissipation, see page 616. ① ① ② ② 4) The current is determined by the fuse used, the voltage by the light indicator. For lever marking, please use marking material with a 5.2 mm pitch.
Terminal blocks - CLIPLINE complete 4 mm2 UT... screw connection terminal blocks Fuse terminal blocks and lever-type disconnect terminal blocks of the same shape ① ① Notes: ② 1) For additional accessories and technical data, see page 40. 2) If the fuse is faulty, the downstream circuit is not off load. 3) For max. power dissipation, see page 616. 4) The current is determined by the fuse used. ③ For lever marking, please use marking material with a 5.2 mm pitch.
Terminal blocks - CLIPLINE complete 4 mm2 UT... screw connection terminal blocks Disconnect and knife disconnect terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 40. 2) If the fuse is faulty, the downstream circuit is not off load. 3) Current and voltage are determined by the plug used. Detailed information and data sheets regarding terminal blocks in the Ex area are available in the product area on our website at www.phoenixcontact.
Terminal blocks - CLIPLINE complete 4 mm2 UT... screw connection terminal blocks Disconnect and knife disconnect terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 40. 2) Current and voltage are determined by the plug used. 20 A, disconnect terminal block, 3 connections 20 A, disconnect terminal block, 4 connections Technical data1) Dimensions [mm] Max. electrical data Max.
Terminal blocks - CLIPLINE complete 4 mm2 UT... screw connection terminal blocks Disconnect and knife disconnect terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 40. 2) Current and voltage are determined by the plug used. 36 A, multi-level terminal block with disconnect zone, PE foot 20 A, knife disconnect terminal block Technical data1) Dimensions [mm] Max. electrical data Max.
Terminal blocks - CLIPLINE complete 4 mm2 UT... screw connection terminal blocks Disconnect and knife disconnect terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 40. 20 A, knife disconnect terminal block, 3 connections 20 A, knife disconnect terminal block, 4 connections Technical data1) Dimensions [mm] Max. electrical data Max. bridge current Rated data Rated voltage Nominal current / cross section [A] [V] [A] / [mm²] Width Length 6.2 65.4 Imax.
Terminal blocks - CLIPLINE complete 4 mm2 UT... screw connection terminal blocks Test disconnect terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 40. ② 28 A, test disconnect terminal block 28 A, feed-through terminal block and ground terminal, same shape Technical data1) Dimensions Max. electrical data Max. bridge current Rated data Rated voltage Nominal current / cross section [mm] [A] [V] [A] / [mm²] Width Length 6.2 66 Imax. [A] Umax.
Terminal blocks - CLIPLINE complete 4 mm2 UT... screw connection terminal blocks Diode terminal blocks ① ① ② ② Notes: 1) For additional accessories and technical data, see page 40. For information on installation and using accessories for Ex applications, see page 602. ③ 41 A, feed-through terminal block and ground terminal, same shape Ex: EAC Ex 0.5 A, diode terminal block, 1N 4007 (1300 V/0.5 A) KEMA 04ATEX2048 U / IECEx KEM 06.0027U Technical data1) Dimensions Max.
Terminal blocks - CLIPLINE complete 4 mm2 UT... screw connection terminal blocks Installation terminal blocks ① Notes: 1) For additional accessories and technical data, see page 40. Assembly instruction: In order to securely fix the neutral busbar in place, support brackets must be placed at the beginning and end of each terminal strip as well as every 20 cm on longer terminal strips. The corresponding support brackets can be found at phoenixcontact.
Terminal blocks - CLIPLINE complete 6 mm2 UT... screw connection terminal blocks General technical data for 6 mm2 UT... screw connection terminal blocks Rated data Rated cross section Cross section range Connection capacity [mm²] AWG IEC 60947-7-1 / IEC 60947-7-2 / IEC 60947-7-3 6 24 - 8 solid stranded Ferrule without/with plastic sleeve 0.2 - 10 0.2 - 10 0.25 - 6 0.25 - 6 0.2 - 2.5 0.2 - 2.5 0.25 - 1.5 0.
Terminal blocks - CLIPLINE complete 6 mm2 UT... screw connection terminal blocks Feed-through terminal blocks ① Notes: 1) For additional accessories and technical data, see page 52. For information on installation and using accessories for Ex applications, see page 602. ② 57 A, feed-through terminal block and ground terminal Ex: EAC Ex KEMA 04ATEX2048 U / IECEx KEM 06.0027U Technical data1) Dimensions [mm] Max. electrical data Max.
Terminal blocks - CLIPLINE complete 6 mm2 UT... screw connection terminal blocks Disconnect terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 52. 2) If the fuse is faulty, the downstream circuit is not off load. 3) Current and voltage are determined by the plug used. Detailed information and data sheets regarding terminal blocks in the Ex area are available in the product area on our website at www.phoenixcontact.
Terminal blocks - CLIPLINE complete 6 mm2 UT... screw connection terminal blocks Knife disconnect terminal blocks ① Notes: 1) For additional accessories and technical data, see page 52. 20 A, knife disconnect terminal block Technical data1) Dimensions Max. electrical data Max. bridge current Rated data Rated voltage Nominal current / cross section [mm] [A] [V] [A] / [mm²] Width Length 8.2 57.8 Imax. [A] Umax. [V] 20 500 20 (FBS) / 20 (FBSR) IEC UL / CUL 500 600 20 / 2.5 20 / - Height 49.
Terminal blocks - CLIPLINE complete 6 mm2 UT... screw connection terminal blocks Test disconnect terminal blocks Notes: For further jumpers, see page 340. For further test sockets, see page 505. For corresponding AP-ME and AH-ME terminal strip covers, see Catalog 5. 57 A, 1000 V, test disconnect terminal block, 2 jumper shafts 50 A, test disconnect terminal block, 4 jumper shafts, 2 screw bridge shafts Technical data Dimensions [mm] Dimensions [mm] Max.
Terminal blocks - CLIPLINE complete 6 mm2 UT... screw connection terminal blocks Test disconnect terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 52. ② For corresponding terminal strip covers, see Catalog 5. 30 A, test disconnect terminal block 41 A, feed-through terminal block and ground terminal, same shape Technical data1) Dimensions [mm] Max. electrical data Max.
Terminal blocks - CLIPLINE complete 6 mm2 UT... screw connection terminal blocks Installation terminal blocks ① Notes: 1) For additional accessories and technical data, see page 52. Assembly instruction: In order to securely fix the neutral busbar in place, support brackets must be placed at the beginning and end of each terminal strip as well as every 20 cm on longer terminal strips. The corresponding support brackets can be found at phoenixcontact.
Terminal blocks - CLIPLINE complete 6 mm2 UT... screw connection terminal blocks For further information and full technical data, visit phoenixcontact.
Terminal blocks - CLIPLINE complete 10 mm2 UT... screw connection terminal blocks General technical data for 10 mm2 UT... screw connection terminal blocks Rated data Rated cross section Cross section range Connection capacity [mm²] AWG IEC 60947-7-1 / IEC 60947-7-2 10 20 - 6 solid stranded 1 conductor [mm²] 0.5 - 16 2 conductors (of the same type) [mm²] 0.5 - 4 2 stranded conductors with a TWIN ferrule [mm²] General data Stripping length [mm] 10 Screw thread M4 Tightening torque [Nm] 1.5 - 1.
Terminal blocks - CLIPLINE complete 10 mm2 UT... screw connection terminal blocks Feed-through terminal blocks and ground terminals ① Notes: 1) For additional accessories and technical data, see page 60. ② For information on installation and using accessories for Ex applications, see page 602. 76 A, feed-through terminal block and ground terminal Ex: KEMA 04ATEX2048 U / IECEx KEM 06.0027U Technical data1) Dimensions Max. electrical data Max.
Terminal blocks - CLIPLINE complete 16 mm2 UT... screw connection terminal blocks General technical data for 16 mm2 UT... screw connection terminal blocks Rated data Rated cross section Cross section range Connection capacity [mm²] AWG IEC 60947-7-1 / IEC 60947-7-2 16 16 - 4 solid stranded 1 conductor [mm²] 1.5 - 25 2 conductors (of the same type) [mm²] 1-6 2 stranded conductors with a TWIN ferrule [mm²] General data Stripping length [mm] 14 Screw thread M5 Tightening torque [Nm] 2.
Terminal blocks - CLIPLINE complete 16 mm2 UT... screw connection terminal blocks Feed-through terminal blocks and ground terminals ① Notes: 1) For additional accessories and technical data, see page 62. ② For information on installation and using accessories for Ex applications, see page 602. ③ 101 A, feed-through terminal block and ground terminal Ex: EAC Ex KEMA 04ATEX2048 U / IECEx KEM 06.0027U Technical data1) Dimensions Max. electrical data Max.
Terminal blocks - CLIPLINE complete 35 mm2 UT... screw connection terminal blocks General technical data for 35 mm2 UT... screw connection terminal blocks Rated data Rated cross section Cross section range Connection capacity [mm²] AWG IEC 60947-7-1 / IEC 60947-7-2 35 16 - 1/0 solid stranded 1 conductor [mm²] 1.5 - 50 2 conductors (of the same type) [mm²] 1.5 - 16 2 stranded conductors with a TWIN ferrule [mm²] General data Stripping length [mm] 18 Screw thread M6 Tightening torque [Nm] 3.2 - 3.
Terminal blocks - CLIPLINE complete 35 mm2 UT... screw connection terminal blocks Feed-through terminal blocks and ground terminals ① ① Notes: 1) For additional accessories and technical data, see page 64. ② For information on installation and using accessories for Ex applications, see page 602. 150 A, feed-through terminal block 125 A, ground terminal Ex: Ex: KEMA 04ATEX2048 U / IECEx KEM 06.0027U KEMA 04ATEX2048 U / IECEx KEM 06.0027U Width 16 Imax.
Terminal blocks - CLIPLINE complete 50 mm2 UKH... screw connection terminal blocks General technical data for 50 mm2 UKH...
Terminal blocks - CLIPLINE complete 50 mm2 UKH... screw connection terminal blocks High-current terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 66. For information on installation and using accessories for Ex applications, see page 602. ② 150 A, feed-through terminal block 150 A, terminal block bases CCA Ex: KEMA 98ATEX1786U / IECEx KEM 06.0029U Technical data1) Dimensions [mm] Max. electrical data Max.
Terminal blocks - CLIPLINE complete 70 mm2 UKH... screw connection terminal blocks General technical data for 70 mm2 UKH...
Terminal blocks - CLIPLINE complete 70 mm2 UKH... screw connection terminal blocks High-current terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 68. For information on installation and using accessories for Ex applications, see page 602. ② 192 A, feed-through terminal block 192 A, terminal block bases Ex: SEV12ATEX0168U / IECEx SEV12.0008U Technical data1) Dimensions [mm] Max. electrical data Max.
Terminal blocks - CLIPLINE complete 70 mm2 UKH... screw connection terminal blocks High-current terminal blocks new Notes: For additional accessories and technical data, see page 68 192 A, power terminal, 4 x 10 mm² outlets Technical data Width 20.3 Width 20.3 Width 20.3 Imax. [A] 192 IEC 60947-7-1 IEC Length 88.6 Length 88.6 Length 88.6 Umax. [V] 1500 Height NS 35/7,5 80 Height NS 35/15 87.5 Height NS 32 85 max.
Terminal blocks - CLIPLINE complete 70 mm2 UKH... screw connection terminal blocks new 192 A, ground terminal, 4 x 10 mm² outlets Technical data Width 20.3 Width 20.3 Width 20.3 Imax. [A] 192 IEC 60947-7-2 IEC Length 88.6 Length 88.6 Length 88.6 Umax. [V] 1000 Height NS 35/7,5 80 Height NS 35/15 87.5 Height NS 32 85 max. Ø [mm²] AWG (UL) 16 - 95 - UL CSA 1000 192 / 70 70 4 - 3/0 solid -/stranded -/- 16 - 95 16 - 25 solid 25 - 70 16 - 25 stranded 1.5 - 16 0.5 - 4 0.5 - 16 0.
Terminal blocks - CLIPLINE complete 95 mm2 UKH... screw connection terminal blocks General technical data for 95 mm2 UKH... screw connection terminal blocks Rated data Rated cross section Cross section range Connection capacity [mm²] AWG IEC 60947-7-1 / IEC 60947-7-2 95 4 - 3/0 solid stranded 1 conductor [mm²] 25 - 95 2 conductors (of the same type) [mm²] 25 - 35 2 stranded conductors with a TWIN ferrule [mm²] Max.
Terminal blocks - CLIPLINE complete 95 mm2 UKH... screw connection terminal blocks High-current terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 72. For information on installation and using accessories for Ex applications, see page 602. ② 232 A, feed-through terminal block 232 A, terminal block base CCA Ex: KEMA 98ATEX1786U / IECEx KEM 06.0029U Technical data1) Dimensions [mm] Max. electrical data Max.
Terminal blocks - CLIPLINE complete 150 mm2 UKH... screw connection terminal blocks General technical data for 150 mm2 UKH... screw connection terminal blocks Rated data Rated cross section Cross section range Connection capacity [mm²] AWG IEC 60947-7-1 150 2 - 300 kcmil solid 1 conductor [mm²] 35 - 150 2 conductors (of the same type) [mm²] 25 - 50 2 stranded conductors with a TWIN ferrule [mm²] Max.
Terminal blocks - CLIPLINE complete 150 mm2 UKH... screw connection terminal blocks High-current terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 74. For information on installation and using accessories for Ex applications, see page 602. 309 A, feed-through terminal block 309 A, terminal block base Ex: KEMA 99ATEX8332 U / IECEx KEM 06.0030U Technical data1) Dimensions [mm] Max. electrical data Max.
Terminal blocks - CLIPLINE complete 240 mm2 UKH... screw connection terminal blocks General technical data for 240 mm2 UKH... screw connection terminal blocks Rated data Rated cross section Cross section range Connection capacity [mm²] AWG IEC 60947-7-1 240 2/0 - 500 kcmil solid 1 conductor [mm²] 70 - 240 2 conductors (of the same type) [mm²] 35 - 95 2 stranded conductors with a TWIN ferrule [mm²] Max.
Terminal blocks - CLIPLINE complete 240 mm2 UKH... screw connection terminal blocks High-current terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 76. For information on installation and using accessories for Ex applications, see page 602. 415 A, feed-through terminal block 415 A, terminal block bases Ex: KEMA 99ATEX8332 U / IECEx KEM 06.0030U Technical data1) Dimensions [mm] Max. electrical data Max.
PHOENIX CONTACT
PT... push-in connection terminal blocks The PT... push-in connection terminal blocks from the CLIPLINE complete system have been developed for direct conductor connection and offer a wide range of application options. Easy handling and direct, tool-free connection with up to 50 percent lower insertion forces are the key advantages of this terminal technology. When solid conductors from 0.25 mm2 or conductors with ferrules from 0.
Terminal blocks - CLIPLINE complete PT... push-in connection terminal blocks Push-in connection technology The PT... series is characterized by the easy, direct conductor connection and makes consistent use of the benefits of the CLIPLINE complete system. 80 PHOENIX CONTACT Easy insertion The up to 50 percent reduction in insertion force offered by push-in technology supports simple and direct insertion of solid and stranded conductors featuring ferrules with a cross section of 0.34 mm2 or higher.
Terminal blocks - CLIPLINE complete PT... push-in connection terminal blocks The reducing bridge allows terminal blocks with different nominal cross sections to be connected with ease, e.g., a PT 10 push-in terminal block to a PT 2,5. Power blocks can be created quickly using the reducing bridge. The double function shaft can be used to connect any number of terminal blocks with two-position bridges. The 2- to 50-pos. bridges allow up to 50 terminal blocks to be bridged in one step.
Terminal blocks - CLIPLINE complete PT... push-in connection terminal blocks PT... feed-through, multi-conductor, and multi-level terminal blocks PTIO... three-conductor initiator/actuator terminal block PT... and PTT... knife disconnect terminal blocks – Optimum ergonomics for tool-free wiring thanks to the integrated actuation lever – Easy insertion with pre-assembled conductor from 0.
Terminal blocks - CLIPLINE complete PT... push-in connection terminal blocks PTME... test disconnect terminal blocks PTRV... marshalling terminals PTMC...
Terminal blocks - CLIPLINE complete PT... push-in connection terminal blocks PTU... hybrid terminal blocks Feed-through and multi-conductor terminal blocks in PTS..., PTS...-TWIN desk design PTI... installation terminal blocks – PT...
Terminal blocks - CLIPLINE complete PT... push-in connection terminal blocks MPT... miniature terminal blocks PTPOWER Power-Turn high-current terminal blocks Motor terminals – Miniature terminal block for 15 mm DIN rail systems – Extremely compact design for use in small control boxes – Testing facility for every current path – Can be jumpered with the patented FBS... jumper system – Protective conductor terminal blocks of the same shape – Plug-in version with COMBI plug-in connection on one side, e.g.
Terminal blocks - CLIPLINE complete 1.5 mm2 PT... push-in connection terminal blocks General technical data for 1.5 mm2 PT... push-in connection terminal blocks Rated data Rated cross section Cross section range Connection capacity [mm²] AWG IEC 60947-7-1 / IEC 60947-7-2 1.5 26 - 14 solid stranded 1 conductor [mm²] 0.14 - 1.5 2 stranded conductors with a TWIN ferrule [mm²] Plug-in connection cross sections [mm²] 0.25 - 1.
Terminal blocks - CLIPLINE complete 1.5 mm2 PT... push-in connection terminal blocks Feed-through, multi-conductor, and multi-level terminal blocks and ground terminals Notes: 1) ① ① ② ② For additional accessories and technical data, see page 86. For information on installation and using accessories for Ex applications, see page 602. 17.5 A, feed-through terminal block 17.5 A, feed-through terminal block, 3 connections Ex: Ex: SEV13ATEX0159U / IECEx SEV13.
Terminal blocks - CLIPLINE complete 1.5 mm2 PT... push-in connection terminal blocks Multi-level terminal blocks ① ① ② ② Notes: 1) For additional accessories and technical data, see page 86. ③ 16 A, double-level terminal block, 4 connections 15 A, multi-level terminal block, 6 connections Technical data1) Dimensions Max. electrical data Max. bridge current Rated data Rated voltage Nominal current / cross section [mm] [A] [V] [A] / [mm²] Width 3.5 Imax. [A] 16 17.
Terminal blocks - CLIPLINE complete 1.5 mm2 PT... push-in connection terminal blocks Initiator/actuator terminal blocks ① ① ② ② ③ ③ Notes: 1) For additional accessories and technical data, see page 86. 13.5 A, three-conductor initiator terminal block 13.5 A, four-conductor actuator terminal block Technical data1) Dimensions Max. electrical data Max. bridge current Rated data Rated voltage Nominal current / cross section [mm] [A] [V] [A] / [mm²] Width 3.5 Imax. [A] 13.5 17.
Terminal blocks - CLIPLINE complete 1.5 mm2 PT... push-in connection terminal blocks Knife disconnect terminal blocks ① ① ② ② Notes: 1) For additional accessories and technical data, see page 86. The nominal current for PT ...MTD.. terminal blocks is 17.5 A. 10 A, knife disconnect terminal block 10 A, knife disconnect terminal block, 3 connections Technical data1) Dimensions [mm] Max. electrical data Max.
Terminal blocks - CLIPLINE complete 1.5 mm2 PT... push-in connection terminal blocks Knife disconnect terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 86. 9 A, double-level knife disconnect terminal block, both levels can be disconnected 9 A, double-level knife disconnect terminal block, top level can be disconnected Technical data1) Dimensions [mm] Max. electrical data Rated data Rated voltage Nominal current / cross section [V] [A] / [mm²] Width 3.
Terminal blocks - CLIPLINE complete 1.5 mm2 PT... push-in connection terminal blocks Marshalling terminal, four levels new 10 A, marshalling terminal, 16 connections Technical data Dimensions – Maximum signal density and up to 20% less space required thanks to the compact design – Easy and tool-free wiring thanks to pushin connection – Freely configurable color assignment for conductors and terminal points, enabling intuitive and safe installation – Four conductors up to 2.
Terminal blocks - CLIPLINE complete 1.5 mm2 PT... push-in connection terminal blocks Potential distributor, four levels new new – Potential distributions with up to 16 connections can be implemented with the PTRV ...-PV terminal block – Blue marshalling terminals for use in Ex i safety circuits < 60 V – Easy potential distribution with jumpers and 6 mm2 supply Notes: 1) Nominal current of 17.5 A. 16 connections 17.
Terminal blocks - CLIPLINE complete 1.5 mm2 PT... push-in connection terminal blocks Marshalling terminal, eight levels new 8 A, marshalling terminal, 32 connections Technical data Dimensions – Maximum signal density and up to 20% less space required thanks to the compact design – Easy and tool-free wiring thanks to pushin connection – Freely configurable color assignment for conductors and terminal points, enabling intuitive and safe installation – Four conductors up to 2.
Terminal blocks - CLIPLINE complete 1.5 mm2 PT... push-in connection terminal blocks Potential distributor, eight levels new new – Potential distributions with up to 32 connections can be implemented with the PTRV ...-PV terminal block – Blue marshalling terminals for use in Ex i safety circuits < 60 V – Easy potential distribution with jumpers and 6 mm2 supply Notes: 1) Nominal current of 17.5 A. 32 connections 17.
Terminal blocks - CLIPLINE complete 1.5 mm2 PT... push-in connection terminal blocks Marshalling terminals for free assembly new Notes: ① For technical data and accessories, see page 92. Marshalling terminal, color configuration according to customer specifications Ordering data – The marshalling terminals can be easily configured and ordered with just a click of the mouse in the product area on our website at phoenixcontact.net/products.
Terminal blocks - CLIPLINE complete 1.5 mm2 PT... push-in connection terminal blocks Ordering example: configured marshalling terminal Available colors: Ordering example: A marshalling terminal with eight levels should be configured as follows according to DIN VDE 0815: BU RD GY YE GN BN WH BK VT OG PK The right side is marked red in the upper levels 1 - 4, and the lower levels 5 - 8 are marked white. Please select order number 3001851 from the configurable items.
Terminal blocks - CLIPLINE complete 1.5 mm2 PT... push-in connection terminal blocks Marshalling patchboards, for selfassembly Notes: 1) Derating curve available on request. Dimensions The modular design allows the exact number of positions to be configured for a specific application. Up to 20% greater signal density thanks to the compact design.
Terminal blocks - CLIPLINE complete 1.5 mm2 PT... push-in connection terminal blocks new new 22 A, single element, 6 connections 22 A, single element, 4 connections Technical data Width 11 Imax. [A] 221) IEC 60947-7-1 IEC Length 12.2 Umax. [V] 500 UL CSA 500 17.51) 26 - 12 solid stranded - 0.14 - 2.5 0.34 - 2.5 0.14 - 1.5 0.34 - 1.5 Technical data Height 30 max. Ø [mm²] 0.14 - 2.5 AWG (UL) - IEC/ EN 60079-7 Ferrule without/with plastic sleeve 0.14 - 1.5 0.14 - 1.5 0.34 - 1.5 0.34 - 1.
Terminal blocks - CLIPLINE complete 1.5 mm2 PT... push-in connection terminal blocks Marshalling patchboards, preassembled with six connections per element new Notes: 1) Derating curve available on request. 22 A, 32-pos., 192 connections Technical data Dimensions – Compact design that requires less space than 19" standard versions – Easy and tool-free wiring thanks to pushin connection – Six conductors up to 2.
Terminal blocks - CLIPLINE complete 1.5 mm2 PT... push-in connection terminal blocks new new 22 A, 48-pos., 288 connections 22 A, 80-pos., 480 connections Technical data Width 66 Imax. [A] 221) IEC 60947-7-1 IEC Length 102 Umax. [V] 500 UL CSA 500 17.51) 26 - 12 solid stranded - 0.14 - 2.5 0.34 - 2.5 0.14 - 1.5 0.34 - 1.5 Technical data Height 30 max. Ø [mm²] 0.14 - 2.5 AWG (UL) - IEC/ EN 60079-7 Ferrule without/with plastic sleeve 0.14 - 1.5 0.14 - 1.5 0.34 - 1.5 0.34 - 1.5 Width 110 Imax.
Terminal blocks - CLIPLINE complete 1.5 mm2 PT... push-in connection terminal blocks Marshalling patchboards, preassembled with four connections per element new Notes: 1) Derating curve available on request. 22 A, 32-pos., 128 connections Technical data Dimensions – Maximum signal density with ten percent less space required than 19" standard versions – Easy and tool-free wiring thanks to pushin connection – Six conductors up to 2.
Terminal blocks - CLIPLINE complete 1.5 mm2 PT... push-in connection terminal blocks new new 22 A, 48-pos., 192 connections 22 A, 80-pos., 320 connections Technical data Width 66 Imax. [A] 221) IEC 60947-7-1 IEC Length 73.2 Umax. [V] 500 UL CSA 500 17.51) 26 - 12 solid stranded - 0.14 - 2.5 0.34 - 2.5 0.14 - 1.5 0.34 - 1.5 Technical data Height 30 max. Ø [mm²] 0.14 - 2.5 AWG (UL) - IEC/ EN 60079-7 Ferrule without/with plastic sleeve 0.14 - 1.5 0.14 - 1.5 0.34 - 1.5 0.34 - 1.5 Width 110 Imax.
Terminal blocks - CLIPLINE complete 1.5 mm2 PT... push-in connection terminal blocks Marshalling patchboards for 19", six connections per element new Notes: 1) Derating curve available on request. 22 A, 32-pos., 128 connections, 6 connections per element Technical data Dimensions – Size according to standard DIN EN 60297-3-101 for 19" housing – Easy and tool-free wiring thanks to pushin connection – Six conductors up to 2.
Terminal blocks - CLIPLINE complete 1.5 mm2 PT... push-in connection terminal blocks new new 22 A, 48-pos., 288 connections, 6 connections per element 22 A, 80-pos., 480 connections, 6 connections per element Technical data Width 66 Imax. [A] 221) IEC 60947-7-1 IEC Length 111 Umax. [V] 500 UL CSA 500 17.51) 26 - 12 solid stranded - 0.14 - 2.5 0.34 - 2.5 0.14 - 1.5 0.34 - 1.5 new 22 A, 32-pos., 128 connections Technical data Height 30 max. Ø [mm²] 0.14 - 2.
Terminal blocks - CLIPLINE complete 1.5 mm2 PT... push-in connection terminal blocks Marshalling patchboards for free assembly new – The marshalling patchboards can be easily configured and ordered with just a click of the mouse in the product area on our website at phoenixcontact.net/products. – To order via fax or e-mail, please use the ordering data as shown in the ordering example on the following page ① ② ② Notes: 1) For additional accessories and technical data, see page 86.
Terminal blocks - CLIPLINE complete 1.5 mm2 PT... push-in connection terminal blocks Ordering example: configurable marshalling patchboard Ordering example: Available colors: A marshalling patchboard should be configured as follows: BU RD GY YE GN BN WH BK VT OG PK Actuation lever, screw fixing of marshalling patchboard, three connections per individual element. Four rows in the X direction and ten columns in the Y direction. Please select Order No. 3001932 from the configurable items.
Terminal blocks - CLIPLINE complete 1.5 mm2 PT... push-in connection terminal blocks Feed-through, multi-conductor, and multi-level terminal blocks and ground terminals in desk design Notes: 1) ① ① ② ② For additional accessories and technical data, see page 86. 17.5 A, feed-through terminal block 17.5 A, feed-through terminal block, 3 connections Technical data1) Dimensions Max. electrical data Max.
Terminal blocks - CLIPLINE complete 1.5 mm2 PT... push-in connection terminal blocks Mini feed-through terminal blocks and ground terminals Notes: 1) ① ② For additional accessories and technical data, see page 86. For information on installation and using accessories for Ex applications, see page 602. 17.5 A, mini feed-through terminal block Ex: SEV14ATEX0140U / IECEx SEV14.0010U Technical data1) Dimensions Max. electrical data Max.
Terminal blocks - CLIPLINE complete 2.5 mm2 PT... push-in connection terminal blocks General technical data for 2.5 mm2 PT... push-in connection terminal blocks Rated data Rated cross section Cross section range Connection capacity [mm²] AWG IEC 60947-7-1 / IEC 60947-7-2 2.5 26 - 12 solid stranded 1 conductor [mm²] 0.14 - 4 2 stranded conductors with a TWIN ferrule [mm²] Plug-in connection cross sections [mm²] 0.
Terminal blocks - CLIPLINE complete 2.5 mm2 PT... push-in connection terminal blocks Feed-through, multi-conductor, and multi-level terminal blocks and ground terminals Notes: 1) ① ① ② ② For additional accessories and technical data, see page 110. For information on installation and using accessories for Ex applications, see page 602. 30 A, feed-through terminal block 30 A, feed-through terminal block, 3 connections Ex: Ex: PTB 09ATEX1111U / IECEx PTB 10.
Terminal blocks - CLIPLINE complete 2.5 mm2 PT... push-in connection terminal blocks Feed-through, multi-conductor, and multi-level terminal blocks and ground terminals Notes: 1) ① ① ② ② new For additional accessories and technical data, see page 110. ③ 30 A, double-level terminal block with PE foot 24 A, double-level terminal block, 3 connections per level Technical data1) Dimensions [mm] Max. electrical data Max.
Terminal blocks - CLIPLINE complete 2.5 mm2 PT... push-in connection terminal blocks Feed-through, multi-conductor, and multi-level terminal blocks and ground terminals ① new ① Notes: 1) For additional accessories and technical data, see page 110. 24 A, three-level terminal block with PE foot 25 A, four-level terminal block with PE foot Technical data1) Dimensions [mm] Max. electrical data Max.
Terminal blocks - CLIPLINE complete 2.5 mm2 PT... push-in connection terminal blocks Disconnect and knife disconnect terminal blocks new ① new ① Notes: 1) For additional accessories and technical data, see page 110. 2) Current and voltage are determined by the plug used. Dimensions [mm] Max.
Terminal blocks - CLIPLINE complete 2.5 mm2 PT... push-in connection terminal blocks Disconnect and knife disconnect terminal blocks new ① new ① Notes: 1) For additional accessories and technical data, see page 110. 2) Current and voltage are determined by the plug used. Dimensions [mm] Max. electrical data Rated data Rated voltage Nominal current / cross section [V] [A] / [mm²] Width 5.2 Imax. [A] 20 IEC 4002) 20 / 2.
Terminal blocks - CLIPLINE complete 2.5 mm2 PT... push-in connection terminal blocks Disconnect and knife disconnect terminal blocks new ① Notes: 1) For additional accessories and technical data, see page 110. 2) Current and voltage are determined by the plug used. 20 A, disconnect terminal block, 4 connections Technical data1) Dimensions [mm] Max. electrical data Rated data Rated voltage Nominal current / cross section [V] [A] / [mm²] Width 5.2 Imax. [A] 20 IEC 4002) 20 / 2.5 Length 79.6 Umax.
Terminal blocks - CLIPLINE complete 2.5 mm2 PT... push-in connection terminal blocks Disconnect and knife disconnect terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 110. 2) Current and voltage are determined by the plug used. 3) 3-pos. termination block.
Terminal blocks - CLIPLINE complete 2.5 mm2 PT... push-in connection terminal blocks Disconnect and knife disconnect terminal blocks new ① new ① Notes: 1) For additional accessories and technical data, see page 110. Dimensions [mm] Max. electrical data Rated data Rated voltage Nominal current / cross section [V] [A] / [mm²] 20 A, knife disconnect terminal block 20 A, feed-through terminal block, same shape Technical data1) Technical data1) Width 5.2 Imax. [A] 20 IEC 400 20 / 2.
Terminal blocks - CLIPLINE complete 2.5 mm2 PT... push-in connection terminal blocks Disconnect and knife disconnect terminal blocks new ① new ① Notes: 1) For additional accessories and technical data, see page 110. 2) The max. load current must not be exceeded by the total current of all connected conductors. Dimensions [mm] Max.
Terminal blocks - CLIPLINE complete 2.5 mm2 PT... push-in connection terminal blocks Disconnect and knife disconnect terminal blocks new ① Notes: 1) For additional accessories and technical data, see page 110. 20 A, knife disconnect terminal block, 4 connections Technical data1) Dimensions [mm] Max. electrical data Rated data Rated voltage Nominal current / cross section [V] [A] / [mm²] Width 5.2 Imax. [A] 20 IEC 400 20 / 2.5 Length 79.6 Umax. [V] 400 UL / CUL - Height 36.5 (NS 35/7,5) max.
Terminal blocks - CLIPLINE complete 2.5 mm2 PT... push-in connection terminal blocks Diode terminal blocks ① ① ② ② Notes: 1) For additional accessories and technical data, see page 110. 0.5 A, diode terminal block, 1N 4007 (1300 V/0.5 A) 0.5 A, diode terminal block, 1N 4007 (1300 V/0.5 A), 3 connections Technical data1) Dimensions Max. electrical data Max. bridge current Rated data Rated voltage Nominal current / cross section [mm] [A] [V] [A] / [mm²] Width Length 5.2 48.5 Imax.
Terminal blocks - CLIPLINE complete 2.5 mm2 PT... push-in connection terminal blocks Diode and component terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 110. ② 26 A, double-level diode terminal block, 1N 4007 (1300 V/0.5 A) 26 A, double-level terminal block for soldering in components Technical data1) Dimensions [mm] Max. electrical data Max. bridge current Rated data Rated voltage Nominal current / cross section [A] [V] [A] / [mm²] Width Length 5.
Terminal blocks - CLIPLINE complete 2.5 mm2 PT... push-in connection terminal blocks Hybrid terminal blocks with screw connection on one side, 2.5 (4) mm2 new ① ① Notes: 1) For additional accessories and technical data, see page 110. 2) For screw connection rated data, see page 30. ② ② 24 A, feed-through terminal block 28 A, feed-through terminal block, 3 connections Technical data1) Dimensions [mm] Max. electrical data Max.
Terminal blocks - CLIPLINE complete 2.5 mm2 PT... push-in connection terminal blocks Feed-through, multi-conductor, and multi-level terminal blocks and ground terminals in desk design Notes: 1) ① ① ② ② For additional accessories and technical data, see page 110. 30 A, feed-through terminal block 28 A, feed-through terminal block, 3 connections Technical data1) Dimensions [mm] Max. electrical data Max.
Terminal blocks - CLIPLINE complete 2.5 mm2 PT... push-in connection terminal blocks Feed-through, multi-conductor, and multi-level terminal blocks and ground terminals in desk design Notes: 1) new ① new ① ② ② ③ ③ For additional accessories and technical data, see page 110. Dimensions [mm] Max. electrical data Max.
Terminal blocks - CLIPLINE complete 2.5 mm2 PT... push-in connection terminal blocks Installation terminal blocks ① ① Notes: 1) ② For additional accessories and technical data, see page 110. Assembly instruction: In order to securely fix the neutral busbar in place, support brackets must be placed at the beginning and end of each terminal strip as well as every 20 cm on longer terminal strips. The corresponding support brackets can be found at phoenixcontact.
Terminal blocks - CLIPLINE complete 2.5 mm2 PT... push-in connection terminal blocks Installation terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 110. 2) 3-pos. termination block. ② Assembly instruction: In order to securely fix the neutral busbar in place, support brackets must be placed at the beginning and end of each terminal strip as well as every 20 cm on longer terminal strips. The corresponding support brackets can be found at phoenixcontact.
Terminal blocks - CLIPLINE complete 2.5 mm2 PT... push-in connection terminal blocks Installation terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 110. 2) 3-pos. termination block. ② Assembly instruction: In order to securely fix the neutral busbar in place, support brackets must be placed at the beginning and end of each terminal strip as well as every 20 cm on longer terminal strips. The corresponding support brackets can be found at phoenixcontact.
Terminal blocks - CLIPLINE complete 2.5 mm2 PT... push-in connection terminal blocks Installation terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 110. 2) 3-pos. termination block. 30 A, three-level terminal block, 1 x L outer conductor, 1 x N conductor can be disconnected 30 A, three-level terminal block, 2 x L outer conductor, 1 x PE Technical data1) Dimensions Max. electrical data Max.
Terminal blocks - CLIPLINE complete 2.5 mm2 PT... push-in connection terminal blocks Installation terminal blocks Notes: 1) For additional accessories and technical data, see page 110. 2) Current and voltage are determined by the plug used. 3) 3-pos. termination block. ① ② 30 A, three-level terminal block, with disconnect zone and PE foot Technical data1) Dimensions – The three-level installation terminal blocks have been specially developed for the building installation sector.
Terminal blocks - CLIPLINE complete 2.5 mm2 PT... push-in connection terminal blocks Installation terminal blocks ① Notes: 1) For additional accessories and technical data, see page 110. 2) 3-pos. termination block. 24 A, three-level terminal block, with PE foot Technical data1) Dimensions [mm] Max. electrical data Max.
Terminal blocks - CLIPLINE complete 4 mm2 PT... push-in connection terminal blocks General technical data for 4 mm2 PT... push-in connection terminal blocks Rated data Rated cross section Cross section range Connection capacity [mm²] AWG IEC 60947-7-1 / IEC 60947-7-2 / IEC 60947-7-3 4 24 - 10 solid stranded Ferrule without/with plastic sleeve 0.2 - 6 0.2 - 4 0.25 - 4 0.25 - 4 0.5 - 1 0.5 - 6 0.5 - 4 0.
Terminal blocks - CLIPLINE complete 4 mm2 PT... push-in connection terminal blocks Feed-through, multi-conductor, and multi-level terminal blocks and ground terminals Notes: 1) ① ① ② ② For additional accessories and technical data, see page 132. For information on installation and using accessories for Ex applications, see page 602. 38 A, feed-through terminal block 38 A, feed-through terminal block, 3 connections Ex: Ex: PTB 09ATEX1112U / IECEx PTB 10.
Terminal blocks - CLIPLINE complete 4 mm2 PT... push-in connection terminal blocks Feed-through and multi-level terminal blocks ① new ① Notes: 1) For additional accessories and technical data, see page 132. 38 A, 1000 V, feed-through terminal block, incl. cover 32 A, four-level terminal block with PE foot Technical data1) Dimensions Max. electrical data Max. bridge current Rated data Rated voltage Nominal current / cross section [mm] [A] [V] [A] / [mm²] Width 8.2 Imax.
Terminal blocks - CLIPLINE complete 4 mm2 PT... push-in connection terminal blocks Fuse terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 132. 2) The current is determined by the fuse used, the voltage by the light indicator. 3) 15 A for single arrangement, 10 A for group arrangement. For the derating curve, see phoenixcontact.net/products.
Terminal blocks - CLIPLINE complete 4 mm2 PT... push-in connection terminal blocks Test disconnect terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 132. ② 24 A, test disconnect terminal block 32 A, feed-through terminal block, same shape Technical data1) Dimensions Max. electrical data Max. bridge current Rated data Rated voltage Nominal current / cross section [mm] [A] [V] [A] / [mm²] Width Length 6.2 70.5 Imax. [A] Umax.
Terminal blocks - CLIPLINE complete 4 mm2 PT... push-in connection terminal blocks Diode terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 132. 1.5 A, diode terminal block, 1N 5408 (1000 V/1.5 A) 1.5 A, diode terminal block, 1N 5408 (1000 V/1.5 A) Technical data1) Dimensions [mm] Max. electrical data Max. bridge current Rated data Rated voltage Nominal current / cross section [A] [V] [A] / [mm²] Width Length 6.2 77 Imax. [A] Umax. [V] 1.
Terminal blocks - CLIPLINE complete 4 mm2 PT... push-in connection terminal blocks Hybrid terminal blocks with screw connection on one side, 4 (6) mm2 new ① new ① Notes: 1) For additional accessories and technical data, see page 132. 2) For screw connection rated data, see page 40. Dimensions Max. electrical data Max.
Terminal blocks - CLIPLINE complete 4 mm2 PT... push-in connection terminal blocks Installation terminal blocks new ① new ① Notes: 1) For additional accessories and technical data, see page 132. Assembly instruction: In order to securely fix the neutral busbar in place, support brackets must be placed at the beginning and end of each terminal strip as well as every 20 cm on longer terminal strips. The corresponding support brackets can be found at phoenixcontact.net/products Dimensions Max.
Terminal blocks - CLIPLINE complete 6 mm2 PT... push-in connection terminal blocks General technical data for 6 mm2 PT... push-in connection terminal blocks Rated data Rated cross section Cross section range Connection capacity [mm²] AWG IEC 60947-7-1 / IEC 60947-7-2 6 20 - 8 solid stranded 1 conductor [mm²] 0.
Terminal blocks - CLIPLINE complete 6 mm2 PT... push-in connection terminal blocks Feed-through, multi-conductor, and multi-level terminal blocks and ground terminals Notes: 1) ① ① ② ② For additional accessories and technical data, see page 140. For information on installation and using accessories for Ex applications, see page 602. 52 A, feed-through terminal block 52 A, feed-through terminal block, 3 connections Ex: Ex: SEV13ATEX0159U / IECEx SEV13.
Terminal blocks - CLIPLINE complete 6 mm2 PT... push-in connection terminal blocks Test disconnect terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 140. ② The PTME 6 HV versions have a rated voltage of 1000 V. For COMBI plug-in test disconnect terminal blocks, see page 276. 30 A, test disconnect terminal block 41 A, feed-through terminal block, same shape Technical data1) Dimensions [mm] Max. electrical data Max.
Terminal blocks - CLIPLINE complete 6 mm2 PT... push-in connection terminal blocks Hybrid terminal blocks with screw connection on one side, 6 (10) mm2 new ① new ① Notes: 1) For additional accessories and technical data, see page 140. 2) For screw connection rated data, see page 52. 41 A, test disconnect terminal block 52 A, feed-through terminal block, same shape Technical data1) Dimensions Max.
Terminal blocks - CLIPLINE complete 6 mm2 PT... push-in connection terminal blocks Diode terminal blocks ① Notes: 1) For additional accessories and technical data, see page 140. 2) If the diode is loaded to 5 A, the surface reaches a temperature of 140°C. 3) ② 1000 V reverse voltage If several diode terminal blocks need adding to the DIN rail, a spacer plate must be placed between them. 5 A, 1000 V, diode terminal block, same shape Spacer plate, same shape Technical data1) Dimensions Max.
Terminal blocks - CLIPLINE complete 6 mm2 PT... push-in connection terminal blocks Installation terminal blocks ① ① Notes: 1) ② For additional accessories and technical data, see page 140. Assembly instruction: In order to securely fix the neutral busbar in place, support brackets must be placed at the beginning and end of each terminal strip as well as every 20 cm on longer terminal strips. The corresponding support brackets can be found at phoenixcontact.
Terminal blocks - CLIPLINE complete 10 mm2 PT... push-in connection terminal blocks General technical data for 10 mm2 PT... push-in connection terminal blocks Rated data Rated cross section Cross section range Connection capacity [mm²] AWG IEC 60947-7-1 / IEC 60947-7-2 / IEC 60947-7-3 10 20 - 6 solid stranded Ferrule without/with plastic sleeve 0.5 - 16 0.5 - 10 0.5 - 10 0.5 - 10 1.5 - 4 1 - 16 4 - 10 2.
Terminal blocks - CLIPLINE complete 10 mm2 PT... push-in connection terminal blocks Feed-through and multi-conductor terminal blocks and ground terminals ① ① ② ② Notes: 1) For additional accessories and technical data, see page 146. For information on installation and using accessories for Ex applications, see page 602. 70 A, feed-through terminal block 70 A, feed-through terminal block, 3 connections Ex: Ex: SEV13ATEX0159U / IECEx SEV13.
Terminal blocks - CLIPLINE complete 16 mm2 PT... push-in connection terminal blocks General technical data for 16 mm2 PT... push-in connection terminal blocks Rated data Rated cross section Cross section range Connection capacity [mm²] AWG IEC 60947-7-1 / IEC 60947-7-2 16 20 - 4 solid stranded 1 conductor [mm²] 0.5 - 25 2 stranded conductors with a TWIN ferrule [mm²] Plug-in connection cross sections [mm²] 2.
Terminal blocks - CLIPLINE complete 16 mm2 PT... push-in connection terminal blocks Feed-through and multi-conductor terminal blocks and ground terminals Notes: 1) For additional accessories and technical data, see page 148. ① ① ② ② For information on installation and using accessories for Ex applications, see page 602. 85 A, feed-through terminal block 85 A, feed-through terminal block, 3 connections Ex: Ex: SEV13ATEX0159U / IECEx SEV13.0005U SEV13ATEX0159U / IECEx SEV13.
Terminal blocks - CLIPLINE complete 35 mm2 PTPOWER Power-Turn high-current terminal blocks Twist connection The patented Power-Turn spring connection technology enables large conductors to be connected quickly and easily using a standard screwdriver and a single lever movement. 150 PHOENIX CONTACT Reliable contact Up to three high-quality spring steel pressure springs work with the prismatic terminal body base to create a vibrationresistant conductor connection that is stable in the long-term.
Terminal blocks - CLIPLINE complete 35 mm2 PTPOWER Power-Turn high-current terminal blocks With PTPOWER 35, the reducing bridge enables terminal blocks with different nominal cross sections to be connected easily, e.g., to a PT 2,5 or PT 4 push-in terminal block. Power blocks can be created quickly using the reducing bridge. Distribute potentials with the isolated insertion bridges. They can be installed easily without any tools and latch securely in the clamping space.
Terminal blocks - CLIPLINE complete 35 mm2 PTPOWER Power-Turn high-current terminal blocks General technical data for 35 mm2 PTPOWER Power-Turn high-current terminal blocks Rated data Rated cross section Cross section range Connection capacity [mm²] AWG IEC 60947-7-1 / IEC 60947-7-2 35 10 - 2 solid stranded 1 conductor [mm²] 6 - 35 2 stranded conductors with a TWIN ferrule [mm²] Plug-in connection cross sections [mm²] 6 - 35 General data Stripping length [mm] 25 Insulating material PA Inflammability clas
Terminal blocks - CLIPLINE complete 35 mm2 PTPOWER Power-Turn high-current terminal blocks High-current terminal blocks new ① new ① Notes: 1) For additional accessories and technical data, see page 152. ② Dimensions [mm] Max. electrical data Max. bridge current Rated data Rated voltage Nominal current / cross section [A] [V] [A] / [mm²] Width 16 Imax. [A] 125 125 IEC 1000 125 125 A, feed-through terminal block 125 A, terminal block base Technical data1) Technical data1) Length 91.6 Umax.
Terminal blocks - CLIPLINE complete 50 mm2 PTPOWER Power-Turn high-current terminal blocks General technical data for 50 mm2 PTPOWER Power-Turn high-current terminal blocks Rated data Rated cross section Cross section range Connection capacity [mm²] AWG IEC 60947-7-1 / IEC 60947-7-2 50 8 - 2/0 solid stranded 1 conductor [mm²] 10 - 70 2 stranded conductors with a TWIN ferrule [mm²] Plug-in connection cross sections [mm²] 10 - 70 Max.
Terminal blocks - CLIPLINE complete 50 mm2 PTPOWER Power-Turn high-current terminal blocks High-current terminal blocks new ① new ① Notes: 1) For additional accessories and technical data, see page 154. ② Dimensions [mm] Max. electrical data Max. bridge current Rated data Rated voltage Nominal current / cross section [A] [V] [A] / [mm²] Width 20 Imax. [A] 150 150 IEC 1500 150 150 A, feed-through terminal block 150 A, terminal block base Technical data1) Technical data1) Length 101 Umax.
Terminal blocks - CLIPLINE complete 95 mm2 PTPOWER Power-Turn high-current terminal blocks General technical data for 95 mm2 PTPOWER Power-Turn high-current terminal blocks Rated data Rated cross section Cross section range Connection capacity [mm²] AWG IEC 60947-7-1 / IEC 60947-7-2 95 4 - 3/0 solid stranded 1 conductor [mm²] 25 - 95 2 stranded conductors with a TWIN ferrule [mm²] Plug-in connection cross sections [mm²] 25 - 95 Max.
Terminal blocks - CLIPLINE complete 95 mm2 PTPOWER Power-Turn high-current terminal blocks High-current terminal blocks ① ① ② ② Notes: 1) For additional accessories and technical data, see page 156. For information on installation and using accessories for Ex applications, see page 602. 232 A, feed-through terminal block 232 A, terminal block base Ex: SEV14ATEX0156U / IECExSEV14.0013U Technical data1) Dimensions [mm] Max. electrical data Max.
Terminal blocks - CLIPLINE complete 150 mm2 PTPOWER Power-Turn high-current terminal blocks General technical data for 150 mm2 PTPOWER Power-Turn high-current terminal blocks Rated data Rated cross section Cross section range Connection capacity [mm²] AWG IEC 60947-7-1 / IEC 60947-7-2 150 1/0 - 300 kcmil solid stranded 1 conductor [mm²] 50 - 150 2 stranded conductors with a TWIN ferrule [mm²] Plug-in connection cross sections [mm²] 50 - 150 Max.
Terminal blocks - CLIPLINE complete 150 mm2 PTPOWER Power-Turn high-current terminal blocks High-current terminal blocks new ① new ① Notes: 1) For additional accessories and technical data, see page 158. 309 A, feed-through terminal block 309 A, terminal block base Technical data1) Dimensions [mm] Max. electrical data Max. bridge current Rated data Rated voltage Nominal current / cross section [A] [V] [A] / [mm²] Width 31 Imax. [A] 309 150 IEC 1500 309 / 150 Technical data1) Length 116.
PHOENIX CONTACT
ST... spring-cage connection terminal blocks The ST... spring-cage connection terminal blocks from the CLIPLINE complete system have been developed for universal springloaded conductor contacting. The high contact force guarantees a vibration-proof, gas-tight connection with long-term stability. The compact front connection ensures easy operation. The terminal point is opened using a standard screwdriver.
Terminal blocks - CLIPLINE complete ST... spring-cage connection terminal blocks Space-saving design Thanks to the space-saving design and conductor entry from above, ST... springcage terminal blocks are ideal for control systems where limited space is available.
Terminal blocks - CLIPLINE complete ST... spring-cage connection terminal blocks The reducing bridge allows terminal blocks with different nominal cross sections to be connected with ease. The reducing bridge can be used to quickly create power blocks, e.g., an ST 10 spring-cage terminal block with an ST 2,5 or ST 4. The double function shaft can be used to connect any number of terminal blocks with two-position bridges. The 2- to 50-pos. bridges allow up to 50 terminal blocks to be bridged in one step.
Terminal blocks - CLIPLINE complete ST... spring-cage connection terminal blocks ST... feed-through, multi-conductor, and multi-level terminal blocks STIO... three-conductor initiator/actuator terminal block ST...
Terminal blocks - CLIPLINE complete ST... spring-cage connection terminal blocks STME... test disconnect terminal blocks STU... hybrid terminal blocks STS...
Terminal blocks - CLIPLINE complete 1.5 mm2 ST... spring-cage connection terminal blocks General technical data for 1.5 mm2 ST... spring-cage connection terminal blocks Rated data Rated cross section Cross section range Connection capacity [mm²] AWG IEC 60947-7-1 / IEC 60947-7-2 1.5 28 - 16 solid stranded 1 conductor [mm²] 0.08 - 1.
Terminal blocks - CLIPLINE complete 1.5 mm2 ST... spring-cage connection terminal blocks Feed-through, multi-conductor, and multi-level terminal blocks and ground terminals Notes: 1) ① ① ② ② For additional accessories and technical data, see page 166. For information on installation and using accessories for Ex applications, see page 602. 17.5 A, feed-through terminal block 17.
Terminal blocks - CLIPLINE complete 1.5 mm2 ST... spring-cage connection terminal blocks Feed-through, multi-conductor, and multi-level terminal blocks and ground terminals ① ① Notes: 1) ② For additional accessories and technical data, see page 166. ISH... insulating sleeves and PS ... and PAI ... test accessories cannot be used with the ST 1,5/S-QUATTRO. ③ For information on installation and using accessories for Ex applications, see page 602. 17.
Terminal blocks - CLIPLINE complete 1.5 mm2 ST... spring-cage connection terminal blocks Double-level terminal blocks ① ① Notes: 1) ② For additional accessories and technical data, see page 166. 24 A, double-level terminal block 20 A, double-level terminal block, both levels can be bridged Technical data1) Dimensions [mm] Max. electrical data Max.
Terminal blocks - CLIPLINE complete 2.5 mm2 ST... spring-cage connection terminal blocks General technical data for 2.5 mm2 ST... spring-cage connection terminal blocks Rated data Rated cross section Cross section range Connection capacity [mm²] AWG IEC 60947-7-1 / IEC 60947-7-2 2.5 28 - 12 solid stranded 1 conductor [mm²] 0.
Terminal blocks - CLIPLINE complete 2.5 mm2 ST... spring-cage connection terminal blocks Feed-through, multi-conductor, and multi-level terminal blocks and ground terminals Notes: 1) ① ① ② ② For additional accessories and technical data, see page 170. For information on installation and using accessories for Ex applications, see page 602. 31 A, feed-through terminal block Ex: [mm] Max. electrical data Max.
Terminal blocks - CLIPLINE complete 2.5 mm2 ST... spring-cage connection terminal blocks Feed-through, multi-conductor, and multi-level terminal blocks and ground terminals Notes: 1) ① ① ② ② For additional accessories and technical data, see page 170. For information on installation and using accessories for Ex applications, see page 602. ③ 26 A, double-level terminal block 32 A, double-level ground terminal Ex: KEMA 00ATEX2052U / IECEx KEM 06.
Terminal blocks - CLIPLINE complete 2.5 mm2 ST... spring-cage connection terminal blocks Multi-level terminal blocks ① ① ② ② Notes: 1) For additional accessories and technical data, see page 170. ③ 28 A, three-level terminal block 28 A, three-level terminal block with PE foot Technical data1) Dimensions [mm] Max. electrical data Max. bridge current Rated data Rated voltage Nominal current / cross section [A] [V] [A] / [mm²] Width Length 5.2 99.5 Imax. [A] Umax.
Terminal blocks - CLIPLINE complete 2.5 mm2 ST... spring-cage connection terminal blocks Initiator/actuator terminal blocks ① ① ② ② Notes: 1) For additional accessories and technical data, see page 170. 18 A, three-conductor initiator terminal block 18 A, three-conductor actuator terminal block with PE foot Technical data1) Dimensions Max. electrical data Max. bridge current Rated data Rated voltage Nominal current / cross section [mm] [A] [V] [A] / [mm²] Width Length 5.2 75 Imax.
Terminal blocks - CLIPLINE complete 2.5 mm2 ST... spring-cage connection terminal blocks Initiator/actuator terminal blocks ① ① ② ② Notes: 1) For additional accessories and technical data, see page 170. 18 A, four-conductor initiator terminal block 18 A, four-conductor actuator terminal block with PE foot Technical data1) Dimensions Max. electrical data Max. bridge current Rated data Rated voltage Nominal current / cross section [mm] [A] [V] [A] / [mm²] Width Length 5.2 92.3 Imax.
Terminal blocks - CLIPLINE complete 2.5 mm2 ST... spring-cage connection terminal blocks Disconnect and knife disconnect terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 170. 2) Current and voltage are determined by the plug used. 20 A, disconnect terminal block 20 A, disconnect terminal block, 3 connections Technical data1) Dimensions [mm] Max. electrical data Max.
Terminal blocks - CLIPLINE complete 2.5 mm2 ST... spring-cage connection terminal blocks Disconnect and knife disconnect terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 170. 20 A, knife disconnect terminal block 20 A, knife disconnect terminal block, 3 connections Technical data1) Dimensions [mm] Max. electrical data Max. bridge current Rated data Rated voltage Nominal current / cross section [A] [V] [A] / [mm²] Width Length 5.2 60.5 Imax. [A] Umax.
Terminal blocks - CLIPLINE complete 2.5 mm2 ST... spring-cage connection terminal blocks Diode terminal blocks ① ① ② ② Notes: 1) For additional accessories and technical data, see page 170. 0.5 A, diode terminal block, 1N 4007 (1300 V/0.5 A) 0.5 A, diode terminal block, 1N 4007 (1300 V/0.5 A), 3 connections Technical data1) Dimensions Max. electrical data Max. bridge current Rated data Rated voltage Nominal current / cross section [mm] [A] [V] [A] / [mm²] Width Length 5.2 48.5 Imax.
Terminal blocks - CLIPLINE complete 2.5 mm2 ST... spring-cage connection terminal blocks Diode terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 170. 2) The operating voltage is determined by the LED version. ② 26 A, double-level diode terminal block, 1N 4007 (1300 V/0.5 A) 26 A, double-level terminal block with LED display Technical data1) Dimensions [mm] Max. electrical data Max.
Terminal blocks - CLIPLINE complete 2.5 mm2 ST... spring-cage connection terminal blocks Hybrid terminal blocks with screw connection on one side, 2.5 (4) mm2 ① Notes: 1) For additional accessories and technical data, see page 170. ② 2) For screw connection rated data, visit phoenixcontact.net/products 28 A, feed-through terminal block, 3 connections Technical data1) Dimensions [mm] Max. electrical data Max.
Terminal blocks - CLIPLINE complete 2.5 mm2 ST... spring-cage connection terminal blocks Desk-design terminal blocks ① ① ② ② Notes: 1) For additional accessories and technical data, see page 170. For information on installation and using accessories for Ex applications, see page 602. ③ 28 A, feed-through terminal block, 4 connections 26 A, double-level terminal block CCA Ex: PTB 07ATEX1027U / IECEx PTB 07.0024U PTB 07ATEX1027U / IECEx PTB 07.0024U Width 5.2 Imax.
Terminal blocks - CLIPLINE complete 2.5 mm2 ST... spring-cage connection terminal blocks Feed-through and multi-conductor terminal blocks and ground terminals ① ① Notes: 1) For additional accessories and technical data, see page 170. ② For information on installation and using accessories for Ex applications, see page 602. 30 A, feed-through terminal block 30 A, feed-through terminal block, 4 connections Ex: Ex: PTB 08ATEX1075U / IECEx PTB 08.
Terminal blocks - CLIPLINE complete 2.5 mm2 ST... spring-cage connection terminal blocks Feed-through and multi-conductor terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 170. For information on installation and using accessories for Ex applications, see page 602. 30 A, feed-through terminal block, for grouping 30 A, flange terminal block, for grouping Ex: Ex: PTB 08ATEX1075U / IECEx PTB 08.0048U PTB 08ATEX1075U / IECEx PTB 08.
Terminal blocks - CLIPLINE complete 2.5 mm2 ST... spring-cage connection terminal blocks Feed-through and multi-conductor terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 170. For information on installation and using accessories for Ex applications, see page 602. 30 A, feed-through terminal block, with securing pin 30 A, feed-through terminal block, 4 connections, with securing pin Ex: Ex: PTB 08ATEX1075U / IECEx PTB 08.
Terminal blocks - CLIPLINE complete 2.5 mm2 ST... spring-cage connection terminal blocks Feed-through and multi-conductor terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 170. 30 A, feed-through terminal block, lateral conductor entry 30 A, feed-through terminal block, lateral conductor entry, 4 connections Technical data1) Dimensions [mm] Max. electrical data Max.
Terminal blocks - CLIPLINE complete 4 mm2 ST... spring-cage connection terminal blocks General technical data for 4 mm2 ST... spring-cage connection terminal blocks Rated data Rated cross section Cross section range Connection capacity [mm²] AWG IEC 60947-7-1 / IEC 60947-7-2 / IEC 60947-7-3 4 28 - 10 solid stranded Ferrule without/with plastic sleeve 0.08 - 6 0.08 - 4 0.14 - 4 0.14 - 4 0.
Terminal blocks - CLIPLINE complete 4 mm2 ST... spring-cage connection terminal blocks Feed-through, multi-conductor, and multi-level terminal blocks and ground terminals Notes: 1) ① ① ② ② For additional accessories and technical data, see page 186. For information on installation and using accessories for Ex applications, see page 602. 40 A, feed-through terminal block Ex: [mm] Max. electrical data Max.
Terminal blocks - CLIPLINE complete 4 mm2 ST... spring-cage connection terminal blocks Feed-through, multi-conductor, and multi-level terminal blocks and ground terminals ① Notes: 1) ① ② For additional accessories and technical data, see page 186. For information on installation and using accessories for Ex applications, see page 602. 32 A, double-level terminal block Ex: Max. electrical data Max.
Terminal blocks - CLIPLINE complete 4 mm2 ST... spring-cage connection terminal blocks Fuse terminal blocks and lever-type disconnect terminal blocks of the same shape ① Notes: ① ② 1) For additional accessories and technical data, see page 186. 2) If the fuse is faulty, the downstream circuit is not off load. 3) The current is determined by the fuse used, the voltage by the selected light indicator. Observe the maximum power dissipation, see phoenixcontact.net/products.
Terminal blocks - CLIPLINE complete 4 mm2 ST... spring-cage connection terminal blocks Disconnect and knife disconnect terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 186. 2) Current and voltage are determined by the plug used. 20 A, disconnect terminal block 20 A, knife disconnect terminal block Technical data1) Dimensions Max. electrical data Max.
Terminal blocks - CLIPLINE complete 4 mm2 ST... spring-cage connection terminal blocks Hybrid terminal blocks with screw connection on one side, 4 (6) mm2 ① ① ② ② Notes: 1) For additional accessories and technical data, see page 186. 2) For screw connection rated data, see page 40. ③ 38 A, feed-through terminal block, 3 connections 32 A, double-level terminal block Technical data1) Dimensions [mm] Max. electrical data Max.
Terminal blocks - CLIPLINE complete 4 mm2 ST... spring-cage connection terminal blocks Desk-design terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 186. For information on installation and using accessories for Ex applications, see page 602. ② 38 A, feed-through terminal block, 3 connections 38 A, feed-through terminal block, 4 connections Technical data1) Dimensions Max. electrical data Max.
Terminal blocks - CLIPLINE complete 4 mm2 ST... spring-cage connection terminal blocks Desk-design disconnect and knife disconnect terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 186. 2) Current and voltage are determined by the plug used. 3) Lower level 4 (6) mm², 34 A, double-level terminal block with disconnect zone 4 (6) mm², 34 A, double-level knife disconnect terminal block Technical data1) Dimensions Max. electrical data Max.
Terminal blocks - CLIPLINE complete 6 mm2 ST... spring-cage connection terminal blocks General technical data for 6 mm2 ST... spring-cage connection terminal blocks Rated data Rated cross section Cross section range Connection capacity [mm²] AWG IEC 60947-7-1 / IEC 60947-7-2 / IEC 60947-7-3 6 24 - 8 solid stranded Ferrule without/with plastic sleeve 0.2 - 10 0.2 - 6 0.25 - 6 0.25 - 6 0.5 - 1.
Terminal blocks - CLIPLINE complete 6 mm2 ST... spring-cage connection terminal blocks Feed-through and multi-conductor terminal blocks and ground terminals ① ① ② ② Notes: 1) For additional accessories and technical data, see page 194. For information on installation and using accessories for Ex applications, see page 602. 52 A, feed-through terminal block 52 A, feed-through terminal block, 3 connections Ex: Ex: KEMA 00ATEX2129U / IECEx KEM 06.
Terminal blocks - CLIPLINE complete 6 mm2 ST... spring-cage connection terminal blocks Test disconnect terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 194. ② 30 A, test disconnect terminal block 41 A, feed-through terminal block, same shape Technical data1) Dimensions [mm] Max. electrical data Max. bridge current Rated data Rated voltage Nominal current / cross section [A] [V] [A] / [mm²] Width Length 8.2 100.8 Imax. [A] Umax.
Terminal blocks - CLIPLINE complete 6 mm2 ST... spring-cage connection terminal blocks Diode terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 194. 2) If the diode is loaded to 5 A, the surface reaches a temperature of 140°C. 3) ② 1000 V reverse voltage. If several diode terminal blocks need adding to the DIN rail, a spacer plate must be placed between them. Covers should ensure that the parts are not touched.
Terminal blocks - CLIPLINE complete 6 mm2 ST... spring-cage connection terminal blocks Test disconnect terminal blocks Notes: For technical data, see page 194. S-URTK/SP switching lock can only be used with SRTK 6.
Terminal blocks - CLIPLINE complete 6 mm2 ST... spring-cage connection terminal blocks Fuse terminal blocks Notes: 1) If the fuse is faulty, the downstream circuit is not off load. 2) The current is determined by the fuse used, the voltage by the selected light indicator. Observe the maximum power dissipation, see phoenixcontact.net/products. 10 A, fuse terminal block for, 5 x 20 mm cartridge fuses 10 A, fuse terminal block, for 6.
Terminal blocks - CLIPLINE complete 10 mm2 ST... spring-cage connection terminal blocks General technical data for 10 mm2 ST... spring-cage connection terminal blocks Rated data Rated cross section Cross section range Connection capacity [mm²] AWG IEC 60947-7-1 / IEC 60947-7-2 10 24 - 6 solid stranded 1 conductor [mm²] 0.
Terminal blocks - CLIPLINE complete 10 mm2 ST... spring-cage connection terminal blocks Feed-through and multi-conductor terminal blocks and ground terminals ① ① ② ② Notes: 1) For additional accessories and technical data, see page 200. For information on installation and using accessories for Ex applications, see page 602. 65 A, feed-through terminal block 70 A, feed-through terminal block, 3 connections Ex: KEMA 01ATEX2260 U / IECEx KEM 06.
Terminal blocks - CLIPLINE complete 10 mm2 ST... spring-cage connection terminal blocks Hybrid terminal blocks with screw connection on one side, 16 (16) mm2 Notes: For additional accessories and technical data, see page 200 57 A, power terminal, 4 x 2.5 mm² outlets Technical data Dimensions Width 10.3 Imax. [A] 57 IEC 60947-7-1 IEC Length 68 Umax. [V] 800 Height NS 35/7,5 48.3 max. Ø [mm²] AWG (UL) 0.5 - 16 20-8 UL / CUL CSA 800 55 / 10 20 - 6 solid 600 50 / 20-8 stranded - 0.5 - 16 0.
Terminal blocks - CLIPLINE complete 10 mm2 ST... spring-cage connection terminal blocks For further information and full technical data, visit phoenixcontact.
Terminal blocks - CLIPLINE complete 16 mm2 ST... spring-cage connection terminal blocks General technical data for 16 mm2 ST... spring-cage connection terminal blocks Rated data Rated cross section Cross section range Connection capacity [mm²] AWG IEC 60947-7-1 / IEC 60947-7-2 16 24 - 4 solid stranded 1 conductor [mm²] 0.
Terminal blocks - CLIPLINE complete 16 mm2 ST... spring-cage connection terminal blocks Feed-through and multi-conductor terminal blocks and ground terminals ① ① ② ② Notes: 1) For additional accessories and technical data, see page 204. For information on installation and using accessories for Ex applications, see page 602. 90 A, feed-through terminal block 90 A, feed-through terminal block, 3 connections Ex: KEMA 01ATEX2260 U / IECEx KEM 06.
Terminal blocks - CLIPLINE complete 35 mm2 ST... spring-cage connection terminal blocks General technical data for 35 mm2 ST... spring-cage connection terminal blocks Rated data Rated cross section Cross section range Connection capacity [mm²] AWG IEC 60947-7-1 / IEC 60947-7-2 35 14 - 2 solid stranded 1 conductor [mm²] 2.
Terminal blocks - CLIPLINE complete 35 mm2 ST... spring-cage connection terminal blocks Feed-through terminal blocks and ground terminals ① ① Notes: 1) For additional accessories and technical data, see page 206. ② Assembly instruction: In order to securely fix the neutral busbar in place, support brackets must be placed at the beginning and end of each terminal strip as well as every 20 cm on longer terminal strips. The corresponding support brackets can be found at phoenixcontact.
PHOENIX CONTACT
QT... fast connection terminal blocks The use of QT... fast connection terminal blocks can save up to 60 percent of the time required for wiring, since stripping and fitting splicing protection are no longer necessary. The cables just need to be cut to length for contact to be made in a matter of seconds. An important characteristic is the space-saving connection with patented insulation displacement contact.
Terminal blocks - CLIPLINE complete QT... fast connection terminal blocks Space-saving design The QUICKON QT series is characterized by the IDC connection. This allows space to be saved without limiting the quality features in any way: – Large-surface marking – Maximum connection space – Flexible jumper system 210 PHOENIX CONTACT Trim to length - Connect - Job done! Time savings of 60% and more compared with other connection systems.
Terminal blocks - CLIPLINE complete QT... fast connection terminal blocks The reducing bridge enables time-saving and low-cost potential distribution when supplying large cross sections. The reducing bridge connects, e.g., an ST 10 terminal block to a QTC 1,5 or QTC 2,5. The double function shaft can be used to connect any number of terminal blocks with two-position bridges. The 2- to 50-pos. bridges allow up to 50 terminal blocks to be bridged in one step.
Terminal blocks - CLIPLINE complete QT... fast connection terminal blocks QT... feed-through terminal blocks QT... disconnect and knife disconnect terminal blocks QTCU... and QTCS...
Terminal blocks - CLIPLINE complete QT... fast connection terminal blocks QT...
Terminal blocks - CLIPLINE complete 1.5 mm2 QT... fast connection terminal blocks General technical data for 1.5 mm2 QT... fast connection terminal blocks Rated data Rated cross section Cross section range Connection cross section according to DIN VDE 0295 H05V(Z) / H07V(Z) Class 5 / Class 6 [litz wires Ø ≥ 0.1 mm] [Litz wires Ø ≥ 0.19 mm] Frequency of connections with the same cross section [mm²] AWG [mm²] [mm²] AWG IEC 60947-7-1 / IEC 60947-7-2 1.5 24 - 16 Notes: 0.5 - 1.5 0.25 - 0.
Terminal blocks - CLIPLINE complete 1.5 mm2 QT... fast connection terminal blocks Feed-through and multi-conductor terminal blocks ① ① ② ② Notes: 1) For additional accessories and technical data, see page 214. For information on installation and using accessories for Ex applications, see page 602. 17.5 A, feed-through terminal block 17.5 A, feed-through terminal block, 3 connections Ex: Ex: KEMA 03ATEX2557U / IECEx KEM 07.0015U KEMA 03ATEX2557U / IECEx KEM 07.
Terminal blocks - CLIPLINE complete 1.5 mm2 QT... fast connection terminal blocks Multi-level and disconnect terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 214. 2) Current and voltage are determined by the plug used. ② For information on installation and using accessories for Ex applications, see page 602. ③ 17.5 A, double-level terminal block 17.5 A, disconnect terminal block Ex: KEMA 03ATEX2557U / IECEx KEM 07.
Terminal blocks - CLIPLINE complete 1.5 mm2 QT... fast connection terminal blocks Knife disconnect terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 214. 17.5 A, knife disconnect terminal block 17.5 A, knife disconnect terminal block, 3 connections Technical data1) Dimensions Max. electrical data Max. bridge current Rated data Rated voltage Nominal current / cross section [mm] [A] [V] [A] / [mm²] Width Length 5.2 76.4 Imax. [A] Umax. [V] 17.
Terminal blocks - CLIPLINE complete 1.5 mm2 QT... fast connection terminal blocks Hybrid terminal blocks with screw connection on one side, 2.5 (4) mm2 ① ① ② ② Notes: 1) For additional accessories and technical data, see page 214. 2) For screw connection rated data, visit phoenixcontact.net/products For information on installation and using accessories for Ex applications, see page 602. 17.5 A, feed-through terminal block 17.
Terminal blocks - CLIPLINE complete 1.5 mm2 QT... fast connection terminal blocks Hybrid terminal blocks with springcage connection on one side, 2.5 (4) mm2 Notes: 1) ① ① ② ② For additional accessories and technical data, see page 214. 2) For spring-cage connection rated data, see page 170. For information on installation and using accessories for Ex applications, see page 602. 17.5 A, feed-through terminal block 17.
Terminal blocks - CLIPLINE complete 2.5 mm2 QT... fast connection terminal blocks General technical data for 2.5 mm2 QT... fast connection terminal blocks Rated data Rated cross section Cross section range Connection cross section according to DIN VDE 0295 H05V(Z) / H07V(Z) Class 5 / Class 6 [litz wires Ø ≥ 0.1 mm] [Litz wires Ø ≥ 0.19 mm] Frequency of connections with the same cross section [mm²] AWG [mm²] [mm²] AWG IEC 60947-7-1 / IEC 60947-7-2 / IEC 60947-7-3 2.5 20 - 14 Notes: 0.5 - 2.
Terminal blocks - CLIPLINE complete 2.5 mm2 QT... fast connection terminal blocks Feed-through and disconnect terminal block ① ① ② ② Notes: 1) For additional accessories and technical data, see page 220. 2) Current and voltage are determined by the plug used. For information on installation and using accessories for Ex applications, see page 602. 24 A, feed-through terminal block 20 A, disconnect terminal block Ex: KEMA 05ATEX2148 U / IECEx KEM 07.
Terminal blocks - CLIPLINE complete 2.5 mm2 QT... fast connection terminal blocks Fuse terminal blocks and lever-type disconnect terminal blocks of the same shape ① Notes: ① ② 1) For additional accessories and technical data, see page 220. 2) If the fuse is faulty, the downstream circuit is not off load. 3) For max. power dissipation, see page 616. 4) The current is determined by the fuse used, the voltage by the light indicator. 6.
Terminal blocks - CLIPLINE complete 2.5 mm2 QT... fast connection terminal blocks Hybrid disconnect terminal block with screw connection on one side, 4 (6) mm2 ① Notes: 1) For additional accessories and technical data, see page 220. 2) For screw connection rated data, visit phoenixcontact.net/products 20 A, knife disconnect terminal block, 3 connections Technical data1) Dimensions [mm] Max. electrical data Max.
PHOENIX CONTACT
COMBI plug-in connection solutions The COMBI plug-in system enables the time-saving and modular configuration of your application. Its distinguishing feature is its standardized plug-in zone. This makes it possible to freely combine basic terminal blocks, which are available with screw, push-in, spring-cage, and fast connection technology. The nominal data of up to 41 A and 1000 V has made a plug-in system for signal and power wiring possible. The system meets the most stringent of vibration requirements.
Terminal blocks - CLIPLINE complete COMBI plug-in connection solutions Cabling options with the COMBI plugin system 2 3 8 9 10 11 12 13 14 15 16 17 ⑧ 2 3 4 5 6 10 11 12 13 14 15 16 17 18 19 20 2 1 ⑱ 1 2 5 SP 2,5 D-SP D 1 8 ⑨ ⑬ 7 10 11 12 13 14 15 6 9 5 8 4 7 3 6 2 5 1 4 9 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 3 ⑬ D-SP D SP 2,5 5 D-SP D SP 2,5 2 5 D-SP D SP 2,5 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 1 2 7 3 1 6 2 5 ⑩ 1 4 ⑬ 1 18
Terminal blocks - CLIPLINE complete 8 7 5 6 ⑯ 500V 24A 2,5 mm2 Typ SPV 2,5 9 10 COMBI plug-in connection solutions 1 2 3 4 ① ⑱ 2 3 4 ② ⑱ 1 D-SP D SP 2,5 3 4 5 ⑬ ⑬ 1 2 D-SP SP 2,5 ③ ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ ⑫ ⑬ ⑭ ⑮ ⑯ ⑰ 34 63 62 61 60 59 58 57 56 56 55 33 35 54 32 36 53 31 37 52 30 38 51 29 39 50 28 40 49 27 41 48 26 43 46 44 45 42 47 25 ⑱ ⑲ Feed-through terminal blocks with one connector outlet Multi-conductor terminal blocks with one connector outlet Mult
Terminal blocks - CLIPLINE complete COMBI plug-in connection solutions UT screw connection Terminal block cross-reference list – plugs UPBV 2,5... Terminal block UPBV 4... Page 247 UP 4... Page 248 UP 6...
Terminal blocks - CLIPLINE complete COMBI plug-in connection solutions QT fast connection ST spring-cage connection PP-H 4 Page 273 PP-H 6 Page 280 SP 2,5... Page 292 SP-H 2,5... Page 293 SPV 2,5... Page 294 SP 4... Page 305 SPB 2,5... Page 295 SPDB 2,5... Page 296 1) 1) QP 1,5 Page 308 CP crimp connection CP 4/6 Page 315 2) 1) 3) 1) For further information and full technical data, visit phoenixcontact.
Terminal blocks - CLIPLINE complete COMBI plug-in connection solutions UT screw connection Terminal block cross-reference list – couplings Coupling Terminal block UPBV 2,5... Couplings PPC 1,5/S Page 258 PPC 6/... Page 278 SC 2,5/... Page 287 SC 4/... Page 301 Couplings with securing pin SC 2,5-RZ/... Page 288 SC 4-RZ/...
Terminal blocks - CLIPLINE complete COMBI plug-in connection solutions QT fast connection ST spring-cage connection PP-H 4 Page 273 PP-H 6 Page 280 SP 2,5... Page 292 SP-H 2,5... Page 293 SPV 2,5... Page 294 SP 4... Page 305 SPB 2,5... Page 295 SPDB 2,5... Page 296 For further information and full technical data, visit phoenixcontact.
Terminal blocks - CLIPLINE complete COMBI plug-in connection solutions Flexible and plug-in capable The COMBI family offers a free choice of connection methods. The standardized COMBI plug-in zone allows terminal blocks and plugs to be combined to suit the application regardless of connection method. 232 PHOENIX CONTACT Powerful contact The COMBI plug-in system enables a plug-in wiring solution up to a nominal current of 41 A and a nominal voltage of 1000 V to be implemented.
Terminal blocks - CLIPLINE complete COMBI plug-in connection solutions The standardized bridge system enables up to 50 terminal blocks to be connected with one bridge in an efficient manner suited to the application. A jumping bridge can be created by removing individual forks. A test plug with a 2.3 mm diameter is available for measuring lines. All measurement and test work can be completed at speed using test adapters for 4 mm diameter test plugs and the modular test plugs.
Terminal blocks - CLIPLINE complete 2.5 mm2 COMBI UT plug-in connection solutions General technical data for 2.5 mm2 COMBI UT screw connection terminal blocks Rated data Rated cross section Cross section range Connection capacity [mm²] AWG IEC 61984 2.5 26 - 12 solid 1 conductor [mm²] 0.14 - 4 2 conductors (of the same type) [mm²] 0.14 - 1.
Terminal blocks - CLIPLINE complete 2.5 mm2 COMBI UT plug-in connection solutions Feed-through, multi-conductor, and multi-level terminal blocks and ground terminals Notes: 1) For additional accessories and technical data, see page 234. 2) For derating curve, visit phoenixcontact.net/products ① ① ② ② For screw flange, see page 320. 24 A, feed-through terminal block 24 A, feed-through terminal block, 3 connections Technical data1) Dimensions [mm] Max. electrical data Max.
Terminal blocks - CLIPLINE complete 2.5 mm2 COMBI UT plug-in connection solutions Feed-through, multi-conductor, and multi-level terminal blocks and ground terminals Notes: 1) For additional accessories and technical data, see page 234. 2) For derating curve, visit phoenixcontact.net/products ① ① ② ② For screw flange, see page 320. For self-locking flange, see page 319. 24 A, feed-through terminal block 22 A, double-level terminal block Technical data1) Dimensions Max.
Terminal blocks - CLIPLINE complete 2.5 mm2 COMBI UT plug-in connection solutions COMBI headers for PCB connection Notes: For additional accessories and technical data, see page 314 or visit phoenixcontact.net/products 24 A, header, horizontal plug-in direction 24 A, header, vertical plug-in direction Technical data Dimensions [mm] Max.
Terminal blocks - CLIPLINE complete 2.5 mm2 COMBI UT plug-in connection solutions COMBI connectors Notes: 1) For additional accessories and technical data, see page 234. 2) For derating curve, visit phoenixcontact.
Terminal blocks - CLIPLINE complete 2.5 mm2 COMBI UT plug-in connection solutions COMBI connectors for self-assembly ① Notes: 1) For additional accessories and technical data, see page 234. 2) For derating curve, visit phoenixcontact.net/products 24 A, connector, connection at a right angle to the plug-in direction Technical data1) Dimensions [mm] Max. electrical data Max.
Terminal blocks - CLIPLINE complete 4 mm2 COMBI UT plug-in connection solutions General technical data for 4 mm2 COMBI UT screw connection terminal blocks Rated data Rated cross section Cross section range Connection capacity [mm²] AWG IEC 61984 4 26 - 10 solid 1 conductor [mm²] 0.14 - 6 2 conductors (of the same type) [mm²] 0.14 - 1.
Terminal blocks - CLIPLINE complete 4 mm2 COMBI UT plug-in connection solutions Feed-through, multi-conductor, and multi-level terminal blocks and ground terminals Notes: 1) For additional accessories and technical data, see page 240. 2) For derating curve, visit phoenixcontact.net/products ① ① ② ② new For screw flange, see page 320. 32 A, feed-through terminal block 32 A, feed-through terminal block, horizontal plug-in connection Technical data1) Dimensions [mm] Max. electrical data Max.
Terminal blocks - CLIPLINE complete 4 mm2 COMBI UT plug-in connection solutions COMBI plug-in PIN/PIN double-level and ground terminals Notes: 1) For additional accessories and technical data, see page 240. 2) For derating curve, visit phoenixcontact.
Terminal blocks - CLIPLINE complete 4 mm2 COMBI UT plug-in connection solutions Test disconnect terminal blocks ① Notes: 1) For additional accessories and technical data, see page 240. 2) For derating curve, visit phoenixcontact.net/products 28 A, test disconnect terminal block Technical data1) Dimensions Max. electrical data Max. bridge current Rated data Rated voltage Nominal current / cross section [mm] [A] [V] [A] / [mm²] Width Length 6.2 71.1 Imax. [A] Umax.
Terminal blocks - CLIPLINE complete 4 mm2 COMBI UT plug-in connection solutions Test disconnect terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 240. 2) For derating curve, visit phoenixcontact.net/products ② 28 A, current transformer disconnect terminal block 20 A, connector, with integrated short-circuit function Technical data1) Dimensions Max. electrical data Max.
Terminal blocks - CLIPLINE complete 4 mm2 COMBI UT plug-in connection solutions COMBI headers for PCB connection Notes: For additional accessories and technical data, see page 314 or visit phoenixcontact.net/products 32 A, header, horizontal plug-in direction 32 A, header, vertical plug-in direction Technical data Dimensions [mm] Max.
Terminal blocks - CLIPLINE complete 4 mm2 COMBI UT plug-in connection solutions Connectors new new ① ① – Direct connection of current transformers and voltage transducers, e.g., to a protective relay for mediumvoltage switchgear – UP 4...CT and BP 4...CT connectors contain a short-circuit element. When removing the connector from the device, a leading short circuit of the connected current transformer is carried out. ② Notes: 1) For additional accessories and technical data, see page 240.
Terminal blocks - CLIPLINE complete 4 mm2 COMBI UT plug-in connection solutions COMBI connectors ① ① Notes: 1) For additional accessories and technical data, see page 240. 2) For derating curve, visit phoenixcontact.net/products 32 A, connector, connection at a right angle to the plug-in direction 32 A, connector, connection at a right angle to the plug-in direction, for self-assembly Technical data1) Dimensions [mm] Max. electrical data Max.
Terminal blocks - CLIPLINE complete 4 mm2 COMBI UT plug-in connection solutions COMBI connectors ① ① Notes: 1) For additional accessories and technical data, see page 240. 2) For derating curve, visit phoenixcontact.net/products 32 A, connector, connection in plug-in direction 32 A, connector, connection in plug-in direction, for self-assembly Technical data1) Dimensions [mm] Max.
Terminal blocks - CLIPLINE complete 4 mm2 COMBI UT plug-in connection solutions For further information and full technical data, visit phoenixcontact.
Terminal blocks - CLIPLINE complete 6 mm2 COMBI UT plug-in connection solutions General technical data for 6 mm2 COMBI UT screw connection terminal blocks Rated data Rated cross section Cross section range Connection capacity [mm²] AWG IEC 61984 6 24 - 8 solid 1 conductor [mm²] 0.2 - 10 2 conductors (of the same type) [mm²] 0.2 - 2.
Terminal blocks - CLIPLINE complete 6 mm2 COMBI UT plug-in connection solutions Feed-through and multi-conductor terminal blocks and ground terminals Notes: 1) For additional accessories and technical data, see page 250. 2) For derating curve, visit phoenixcontact.net/products ① ① ② ② For screw flange, see page 320. 41 A, feed-through terminal block 41 A, feed-through terminal block, 4 connections Technical data1) Dimensions Max. electrical data Max.
Terminal blocks - CLIPLINE complete 6 mm2 COMBI UT plug-in connection solutions COMBI connectors Notes: 1) For additional accessories and technical data, see page 250. 2) For derating curve, visit phoenixcontact.
Terminal blocks - CLIPLINE complete 6 mm2 COMBI UT plug-in connection solutions COMBI connectors for self-assembly Notes: 1) For additional accessories and technical data, see page 250. 2) For derating curve, visit phoenixcontact.
Terminal blocks - CLIPLINE complete 1.5 mm2 COMBI PT plug-in connection solutions General technical data for 1.5 mm2 COMBI PT push-in connection terminal blocks Rated data Rated cross section Cross section range Connection capacity [mm²] AWG IEC 61984 1.5 26 - 14 solid 1 conductor [mm²] 0.14 - 1.5 2 stranded conductors with a TWIN ferrule [mm²] Plug-in connection cross sections [mm²] 0.25 - 1.
Terminal blocks - CLIPLINE complete 1.5 mm2 COMBI PT plug-in connection solutions Feed-through, multi-conductor, and multi-level terminal blocks and ground terminals Notes: 1) For additional accessories and technical data, see page 254. 2) For derating curve, visit phoenixcontact.net/products ① ① ② ② 17.5 A, feed-through terminal block 17.5 A, feed-through terminal block, 3 connections Technical data1) Dimensions [mm] Max. electrical data Max.
Terminal blocks - CLIPLINE complete 1.5 mm2 COMBI PT plug-in connection solutions Mini feed-through terminal blocks and ground terminals ① Notes: 1) For additional accessories and technical data, see page 254. 2) For derating curve, visit phoenixcontact.net/products ② 17.5 A, mini feed-through terminal block Technical data1) Dimensions [mm] Max. electrical data Max. bridge current Rated data Rated voltage Nominal current / cross section [A] [V] [A] / [mm²] Width 3.5 Imax. [A] 17.52) 17.
Terminal blocks - CLIPLINE complete 1.5 mm2 COMBI PT plug-in connection solutions Desk-design terminal blocks ① ① ② ② Notes: 1) For additional accessories and technical data, see page 254. 2) For derating curve, visit phoenixcontact.net/products 17.5 A, feed-through terminal block Dimensions [mm] Max. electrical data Max. bridge current Rated data Rated voltage Nominal current / cross section [A] [V] [A] / [mm²] 17.
Terminal blocks - CLIPLINE complete 1.5 mm2 COMBI PT plug-in connection solutions Couplings ① ① Notes: 1) For additional accessories and technical data, see page 254. 2) For derating curve, visit phoenixcontact.net/products 17.5 A, coupling 17.5 A, coupling, for self-assembly Technical data1) Dimensions [mm] Max. electrical data Rated data Rated voltage Nominal current / cross section [V] [A] / [mm²] Width 3.5 x Number of positions Imax. [A] 17.52) IEC 500 17.52) / 1.
Terminal blocks - CLIPLINE complete 1.5 mm2 COMBI PT plug-in connection solutions Couplings ① Notes: 1) For additional accessories and technical data, see page 254. 2) For derating curve, visit phoenixcontact.net/products 17.5 A, coupling for DIN rail mounting Technical data1) Dimensions Max. electrical data Rated data Rated voltage Nominal current / cross section [mm] [V] [A] / [mm²] Width 3.5 Imax. [A] 17.52) IEC 500 17.52) / 1.5 Length 43 Umax. [V] 500 UL / CUL 600 15 / - Height 28.
Terminal blocks - CLIPLINE complete 1.5 mm2 COMBI PT plug-in connection solutions COMBI connectors Notes: 1) For additional accessories and technical data, see page 254. 2) For derating curve, visit phoenixcontact.net/products ① 17.5 A, connector, connection in plug-in direction Technical data1) Dimensions – Extensive, optional snap-on accessories available – Practical coding facility – Large marking option – Robust cable housings for strain relief on connecting cables are available Max.
Terminal blocks - CLIPLINE complete 1.5 mm2 COMBI PT plug-in connection solutions COMBI connectors for self-assembly Notes: 1) For additional accessories and technical data, see page 254.
Terminal blocks - CLIPLINE complete 2.5 mm2 COMBI PT plug-in connection solutions General technical data for 2.5 mm2 COMBI PT push-in connection terminal blocks Rated data Rated cross section Cross section range Connection capacity [mm²] AWG IEC 61984 2.5 26 - 12 solid 1 conductor [mm²] 0.14 - 4 2 stranded conductors with a TWIN ferrule [mm²] Plug-in connection cross sections [mm²] 0.
Terminal blocks - CLIPLINE complete 2.5 mm2 COMBI PT plug-in connection solutions Feed-through, multi-conductor, and multi-level terminal blocks and ground terminals Notes: 1) For additional accessories and technical data, see page 262. 2) For derating curve, visit phoenixcontact.net/products ① ① ② ② For screw flange, see page 320. For self-locking flange, see page 319.
Terminal blocks - CLIPLINE complete 2.5 mm2 COMBI PT plug-in connection solutions Feed-through, multi-conductor, and multi-level terminal blocks and ground terminals new Notes: 1) For additional accessories and technical data, see page 262. 2) For derating curve, visit phoenixcontact.net/products For screw flange, see page 320. For self-locking flange, see page 319.
Terminal blocks - CLIPLINE complete 2.5 mm2 COMBI PT plug-in connection solutions Feed-through, multi-conductor, and multi-level terminal blocks and ground terminals Notes: 1) For additional accessories and technical data, see page 262. 2) For derating curve, visit phoenixcontact.net/products ① ① ② ② For screw flange, see page 320. For self-locking flange, see page 319.
Terminal blocks - CLIPLINE complete 2.5 mm2 COMBI PT plug-in connection solutions Multi-level terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 262. 2) For derating curve, visit phoenixcontact.net/products ② 10 A, four-level terminal block 10 A, four-level terminal block with PE foot Technical data1) Dimensions [mm] Max. electrical data Max. bridge current Rated data Rated voltage Nominal current / cross section [A] [V] [A] / [mm²] Width Length 5.
Terminal blocks - CLIPLINE complete 2.5 mm2 COMBI PT plug-in connection solutions COMBI headers for PCB connection Notes: For additional accessories and technical data, see page 314 or visit phoenixcontact.net/products 24 A, header, horizontal plug-in direction 24 A, header, vertical plug-in direction Technical data Dimensions [mm] Max.
Terminal blocks - CLIPLINE complete 2.5 mm2 COMBI PT plug-in connection solutions COMBI connectors Notes: 1) For additional accessories and technical data, see page 262. 2) For derating curve, visit phoenixcontact.net/products ① 24 A, connector, connection in plug-in direction Technical data1) Dimensions – Extensive, optional snap-on accessories available – Practical coding facility – Large marking option – Robust cable housings for strain relief on connecting cables are available Max.
Terminal blocks - CLIPLINE complete 2.5 mm2 COMBI PT plug-in connection solutions COMBI connectors for self-assembly Notes: 1) For additional accessories and technical data, see page 262. 2) For derating curve, visit phoenixcontact.
Terminal blocks - CLIPLINE complete 4 mm2 COMBI PT plug-in connection solutions General technical data for 4 mm2 COMBI PT push-in connection terminal blocks Rated data Rated cross section Cross section range Connection capacity [mm²] AWG IEC 61984 4 24 - 10 solid 1 conductor [mm²] 0.2 - 6 2 stranded conductors with a TWIN ferrule [mm²] Plug-in connection cross sections [mm²] 0.
Terminal blocks - CLIPLINE complete 4 mm2 COMBI PT plug-in connection solutions PT COMBI feed-through terminal blocks ① Notes: 1) For additional accessories and technical data, see page 270. 2) For derating curve, visit phoenixcontact.net/products ② 32 A, feed-through terminal block Technical data1) Dimensions [mm] Max. electrical data Max. bridge current Rated data Rated voltage Nominal current / cross section [A] [V] [A] / [mm²] Width Length 6.2 56 Imax. [A] Umax.
Terminal blocks - CLIPLINE complete 4 mm2 COMBI PT plug-in connection solutions COMBI headers for PCB connection Notes: For additional accessories and technical data, see page 314 or visit phoenixcontact.net/products 32 A, header, horizontal plug-in direction 32 A, header, vertical plug-in direction Technical data Dimensions [mm] Max.
Terminal blocks - CLIPLINE complete 4 mm2 COMBI PT plug-in connection solutions COMBI connectors ① ① Notes: 1) For additional accessories and technical data, see page 270. 2) For derating curve, visit phoenixcontact.net/products 4 (6) mm², 32 A, connector, connection in plugin direction 32 A, connector, connection in plug-in direction, for self-assembly Technical data1) Dimensions [mm] Max.
Terminal blocks - CLIPLINE complete 6 mm2 COMBI PT plug-in connection solutions General technical data for 6 mm2 COMBI PT push-in connection terminal blocks Rated data Rated cross section Cross section range Connection capacity [mm²] AWG IEC 61984 6 20 - 8 solid 1 conductor [mm²] 0.
Terminal blocks - CLIPLINE complete 6 mm2 COMBI PT plug-in connection solutions Feed-through and multi-conductor terminal blocks and ground terminals ① ① ② ② Notes: 1) For additional accessories and technical data, see page 274. 2) For derating curve, visit phoenixcontact.net/products 41 A, feed-through terminal block 41 A, feed-through terminal block, 4 connections Technical data1) Dimensions [mm] Max. electrical data Max.
Terminal blocks - CLIPLINE complete 6 mm2 COMBI PT plug-in connection solutions Test disconnect terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 274. ② 30 A, current transformer disconnect terminal block, for short-circuit plugs 30 A, feed-through terminal block, for shortcircuit plugs Technical data1) Dimensions [mm] Max. electrical data Max. bridge current Rated data Rated voltage Nominal current / cross section [A] [V] [A] / [mm²] Width Length 8.
Terminal blocks - CLIPLINE complete 6 mm2 COMBI PT plug-in connection solutions Supplementary accessories for PTME 6-CT/1P test disconnect terminal blocks Notes: 1) The coding set can be used to code up to 30 plugs. Ordering data – Current transformer measuring circuit can be created using just two PTME 6CT/1P – Less space required compared to creating circuits with slide-type terminal blocks ① FBS... jumper for cross connection ② 4 mm Ø PAI-4-FIX... test plug adapter ③ S-ME 6 switching lock ④ SB-ME...
Terminal blocks - CLIPLINE complete 6 mm2 COMBI PT plug-in connection solutions Couplings ① ① Notes: 1) For additional accessories and technical data, see page 274. 41 A, coupling 41 A, coupling, for self-assembly Technical data1) Dimensions [mm] Max. electrical data Rated data Rated voltage Nominal current / cross section [V] [A] / [mm²] Width 8.2 x Number of positions Imax. [A] 41 IEC 1000 41 / 6 Length 47 Height 24.7 Umax. [V] 1000 UL / CUL 600 40 max. Ø [mm²] 0.
Terminal blocks - CLIPLINE complete 6 mm2 COMBI PT plug-in connection solutions Couplings ① Notes: 1) For additional accessories and technical data, see page 274. 41 A, coupling for DIN rail mounting Technical data1) Dimensions Max. electrical data Rated data Rated voltage Nominal current / cross section [mm] [V] [A] / [mm²] Width 8.2 Imax. [A] 41 IEC 1000 41 / 6 Length 27 Umax. [V] 1000 UL / CUL 600 40 Height 38 (NS 35/7,5) / 38 (NS 15) max. Ø [mm²] AWG (UL) 0.
Terminal blocks - CLIPLINE complete 6 mm2 COMBI PT plug-in connection solutions COMBI connectors ① ① Notes: 1) For additional accessories and technical data, see page 274. 2) For derating curve, visit phoenixcontact.net/products 41 A, connector, connection in plug-in direction 41 A, connector, connection in plug-in direction, for self-assembly Technical data1) Dimensions [mm] Max. electrical data Rated data Rated voltage Nominal current / cross section [V] [A] / [mm²] Width 8.
Terminal blocks - CLIPLINE complete 6 mm2 COMBI PT plug-in connection solutions For further information and full technical data, visit phoenixcontact.
Terminal blocks - CLIPLINE complete 2.5 mm2 COMBI ST plug-in connection solutions General technical data for 2.5 mm2 COMBI ST spring-cage connection terminal blocks Rated data Rated cross section Cross section range Connection capacity [mm²] AWG IEC 61984 2.5 28 - 12 solid 1 conductor [mm²] 0.
Terminal blocks - CLIPLINE complete 2.5 mm2 COMBI ST plug-in connection solutions Feed-through, multi-conductor, and multi-level terminal blocks and ground terminals Notes: 1) For additional accessories and technical data, see page 282. 2) For derating curve, visit phoenixcontact.net/products ① ① ② ② For screw flange, see page 320. For self-locking flange, see page 319.
Terminal blocks - CLIPLINE complete 2.5 mm2 COMBI ST plug-in connection solutions Multi-level terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 282. 2) For derating curve, visit phoenixcontact.net/products For screw flange, see page 320. For self-locking flange, see page 319. 22 A, feed-through terminal block 22 A, feed-through terminal block, with equipotential bonding Technical data1) Dimensions [mm] Max. electrical data Max.
Terminal blocks - CLIPLINE complete 2.5 mm2 COMBI ST plug-in connection solutions Multi-level terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 282. 2) For derating curve, visit phoenixcontact.net/products ② 10 A, four-level terminal block 10 A, four-level terminal block, two slots Technical data1) Dimensions [mm] Max. electrical data Max. bridge current Rated data Rated voltage Nominal current / cross section [A] [V] [A] / [mm²] Width Length 5.
Terminal blocks - CLIPLINE complete 2.5 mm2 COMBI ST plug-in connection solutions Feed-through, multi-conductor, and multi-level terminal blocks and ground terminals Notes: 1) For additional accessories and technical data, see page 282. 2) For derating curve, visit phoenixcontact.net/products ① ① ② ② For screw flange, see page 320. For self-locking flange, see page 319.
Terminal blocks - CLIPLINE complete 2.5 mm2 COMBI ST plug-in connection solutions Couplings ① ① – For secure and space-saving accommodation of plug contacts in cable ducts and distributor shafts – Test hole in every coupling disc, to accommodate a test plug with a 2.3 mm diameter Notes: 1) For additional accessories and technical data, see page 282. 2) For derating curve, visit phoenixcontact.
Terminal blocks - CLIPLINE complete 2.5 mm2 COMBI ST plug-in connection solutions Couplings ① ① Notes: 1) For additional accessories and technical data, see page 282. 2) For derating curve, visit phoenixcontact.net/products 24 A, coupling with securing pin 24 A, coupling with securing pin, for selfassembly Technical data1) Dimensions [mm] Max. electrical data Rated data Rated voltage Nominal current / cross section [V] [A] / [mm²] Width 5.2 x Number of positions Imax.
Terminal blocks - CLIPLINE complete 2.
Terminal blocks - CLIPLINE complete 2.5 mm2 COMBI ST plug-in connection solutions Couplings ① – The terminal blocks are snapped onto the SC... free-hanging couplings as modules and can be used on the NS 15 as well as on the NS 35 DIN rail Notes: 1) For additional accessories and technical data, see page 282. 2) For derating curve, visit phoenixcontact.net/products 24 A, coupling for DIN rail mounting Technical data1) Dimensions Max.
Terminal blocks - CLIPLINE complete 2.5 mm2 COMBI ST plug-in connection solutions COMBI headers for PCB connection Notes: For additional accessories and technical data, see page 314 or visit phoenixcontact.net/products 24 A, header, horizontal plug-in direction 24 A, header, vertical plug-in direction Technical data Dimensions [mm] Max.
Terminal blocks - CLIPLINE complete 2.5 mm2 COMBI ST plug-in connection solutions COMBI connectors ① ① Notes: 1) For additional accessories and technical data, see page 282. 2) For derating curve, visit phoenixcontact.net/products 24 A, connector, connection in plug-in direction 24 A, connector, connection in plug-in direction, for self-assembly Technical data1) Dimensions [mm] Max.
Terminal blocks - CLIPLINE complete 2.5 mm2 COMBI ST plug-in connection solutions COMBI connectors ① ① Notes: 1) For additional accessories and technical data, see page 282. 2) For derating curve, visit phoenixcontact.net/products 2.5 (4) mm², 24 A, connector, connection in plug-in direction 24 A, connector, connection in plug-in direction, for self-assembly, cable housing can be snapped on Technical data1) Dimensions [mm] Max.
Terminal blocks - CLIPLINE complete 2.5 mm2 COMBI ST plug-in connection solutions COMBI connectors ① ① Notes: 1) For additional accessories and technical data, see page 282. 2) For derating curve, visit phoenixcontact.net/products 24 A, connector, connection at a right angle to the plug-in direction 24 A, connector, connection at a right angle to the plug-in direction, for self-assembly Technical data1) Dimensions [mm] Max.
Terminal blocks - CLIPLINE complete 2.5 mm2 COMBI ST plug-in connection solutions COMBI connectors ① ① Notes: 1) For additional accessories and technical data, see page 282. 2) For derating curve, visit phoenixcontact.net/products 24 A, connector, connection in plug-in direction 24 A, connector, connection in plug-in direction, for self-assembly Technical data1) Dimensions [mm] Max. electrical data Max.
Terminal blocks - CLIPLINE complete 2.5 mm2 COMBI ST plug-in connection solutions COMBI connectors ① ① Notes: 1) For additional accessories and technical data, see page 282. 2) For derating curve, visit phoenixcontact.net/products 24 A, connector, two connections in plug-in direction 24 A, connector, two connections in plug-in direction, for self-assembly Technical data1) Dimensions [mm] Max. electrical data Max.
Terminal blocks - CLIPLINE complete 2.5 mm2 COMBI ST plug-in connection solutions COMBI connectors with spring-cage connection COMBI connectors with spring-cage connection for self-assembly – Connector with scope for bridging, for use with basic terminal blocks – The SPB 2,5/... connector is designed for connecting one conductor and also provides an additional bridging facility – The SPDB 2,5/...
Terminal blocks - CLIPLINE complete 4 mm2 COMBI ST plug-in connection solutions General technical data for 4 mm2 COMBI ST spring-cage connection terminal blocks Rated data Rated cross section Cross section range Connection capacity [mm²] AWG IEC 61984 4 28 - 10 solid 1 conductor [mm²] 0.
Terminal blocks - CLIPLINE complete 4 mm2 COMBI ST plug-in connection solutions Feed-through and multi-conductor terminal blocks and ground terminals ① ① ② ② Notes: 1) For additional accessories and technical data, see page 298. 2) For derating curve, visit phoenixcontact.net/products 32 A, feed-through terminal block 32 A, feed-through terminal block, 4 connections Technical data1) Dimensions [mm] Max. electrical data Max.
Terminal blocks - CLIPLINE complete 4 mm2 COMBI ST plug-in connection solutions Feed-through and multi-conductor terminal blocks new Notes: 1) ① For additional accessories and technical data, see page 298. – This plug-in basic terminal block can be fitted with 4 mm2 COMBI connectors as well as crimp contacts in the CP 4/6 connector housing. – Conductors with crimped on STG-MTN... module socket contacts can be easily snapped into the CP 4/6 connector housing.
Terminal blocks - CLIPLINE complete 4 mm2 COMBI ST plug-in connection solutions Couplings ① ① Notes: 1) For additional accessories and technical data, see page 298. 2) For derating curve, visit phoenixcontact.net/products 32 A, coupling 32 A, coupling, for self-assembly Technical data1) Dimensions [mm] Max. electrical data Rated data Rated voltage Nominal current / cross section [V] [A] / [mm²] Width 6.2 x Number of positions Imax. [A] 322) IEC 800 322) / 4 Length 48.6 Height 22.
Terminal blocks - CLIPLINE complete 4 mm2 COMBI ST plug-in connection solutions Couplings ① ① Notes: 1) For additional accessories and technical data, see page 298. 2) For derating curve, visit phoenixcontact.net/products 32 A, coupling with securing pin 32 A, coupling with securing pin, for self-assembly Technical data1) Dimensions [mm] Max. electrical data Rated data Rated voltage Nominal current / cross section [V] [A] / [mm²] Width 6.2 x Number of positions Imax.
Terminal blocks - CLIPLINE complete 4 mm2 COMBI ST plug-in connection solutions Couplings ① Notes: 1) For additional accessories and technical data, see page 298. 2) For derating curve, visit phoenixcontact.net/products 32 A, coupling for DIN rail mounting Panel feed-through Technical data1) Dimensions Max. electrical data Rated data Rated voltage Nominal current / cross section [mm] [V] [A] / [mm²] Width 6.2 Imax. [A] 322) IEC 800 322) / 4 Length 48.6 Umax.
Terminal blocks - CLIPLINE complete 4 mm2 COMBI ST plug-in connection solutions COMBI headers for PCB connection Notes: For additional accessories and technical data, see page 314 or visit phoenixcontact.net/products 32 A, header, horizontal plug-in direction 32 A, header, vertical plug-in direction Technical data Dimensions [mm] Max.
Terminal blocks - CLIPLINE complete 4 mm2 COMBI ST plug-in connection solutions COMBI connectors ① ① Notes: 1) For additional accessories and technical data, see page 298. 2) For derating curve, visit phoenixcontact.net/products 32 A, connector, connection in plug-in direction 32 A, connector, connection in plug-in direction, for self-assembly Technical data1) Dimensions [mm] Max. electrical data Rated data Rated voltage Nominal current / cross section [V] [A] / [mm²] Width 6.
Terminal blocks - CLIPLINE complete 1.5 mm2 COMBI QT plug-in connection solutions General technical data for 1.5 mm2 COMBI QT... fast connection terminal blocks Rated data Rated cross section Cross section range Connection cross section according to DIN VDE 0295 H05V(Z) / H07V(Z) Class 5 / Class 6 [litz wires Ø ≥ 0.1 mm] [Litz wires Ø ≥ 0.19 mm] Frequency of connections with the same cross section [mm²] AWG [mm²] [mm²] AWG IEC 61984 1.5 24 - 16 Notes: 0.5 - 1.5 0.25 - 0.
Terminal blocks - CLIPLINE complete 1.5 mm2 COMBI QT plug-in connection solutions Feed-through and multi-level terminal blocks and ground terminals Notes: 1) For additional accessories and technical data, see page 306. 2) For derating curve, visit phoenixcontact.net/products ① ① ② ② ③ 17.5 A, feed-through terminal block 17.5 A, double-level terminal block Technical data1) Dimensions Max. electrical data Max.
Terminal blocks - CLIPLINE complete 1.5 mm2 COMBI QT plug-in connection solutions COMBI connectors Notes: 1) For additional accessories and technical data, see page 306. 2) For derating curve, visit phoenixcontact.net/products ① For further accessories, see page 312. 17.5 A, connector, connection in plug-in direction Technical data1) Dimensions – Just like the basic terminal blocks, the connectors also offer the right connection method for every application – The QP 1,5/...
Terminal blocks - CLIPLINE complete 1.5 mm2 COMBI QT plug-in connection solutions COMBI connectors Notes: 1) For additional accessories and technical data, see page 306. 2) For derating curve, visit phoenixcontact.net/products ① For further accessories, see page 312. 17.5 A, connector, connection in plug-in direction, for self-assembly Technical data1) Dimensions – The QT-COMBI connectors for selfassembly provide solutions that users can implement themselves – The QP 1,5/...
Terminal blocks - CLIPLINE complete COMBI plug-in connection solutions - accessories PZ 1,5/S/2 Cross-reference list: COMBI accessories UPBV 2,5... UPBV 4... UP 4... UP 6... UPCT 4/... PP-H 1,5... PP-H 2,5... PP-H 4... PP-H 6... PPCT 6/... SP 2,5... SP-H 2,5... SPV 2,5... SP 4... SPB 2,5... SPDB 2,5... QP 1,5... Couplings PPC 1,5... PPC 6... SC 2,5... SC 4... 310 PHOENIX CONTACT Accessories Connectors Order No.: 3212918 PZ/2 Order No.: 3040627 PZ/4 Order No.: 3040643 UPZ/2 Order No.
Terminal blocks - CLIPLINE complete COMBI plug-in connection solutions - accessories UPRZ Order No.: 3045570 PR-1,5/S Order No.: 3212882 PR-1,5/S/2 Order No.: 3212895 PR Order No.: 3040559 PR/2 Order No.: 3040630 PRT/2 Order No.: 3040631 PRV/2 Order No.: 3041862 UPR/2 Order No.: 3045567 PH 1,5/S/... Order No.: 3212... For further information and full technical data, visit phoenixcontact.net/products PH 2,5/... Order No.: 3209... PH 4/... Order No.: 3000... PH 6/... Order No.: 3000...
Terminal blocks - CLIPLINE complete COMBI plug-in connection solutions - accessories Strain relief for connectors Notes: For application options for accessories, refer to page 311. For corresponding cable binders, see Catalog 5.
Terminal blocks - CLIPLINE complete COMBI plug-in connection solutions - accessories Snap-lock device and strain relief Notes: For application options for accessories, refer to page 311. For corresponding cable binders, see Catalog 5.
Terminal blocks - CLIPLINE complete COMBI plug-in connection solutions - accessories PSH... shielding Notes: For corresponding cable binders, see Catalog 5.
Terminal blocks - CLIPLINE complete COMBI plug-in connection solutions - accessories CP...
Terminal blocks - CLIPLINE complete COMBI plug-in connection solutions - accessories Cable housing for COMBI connector Notes: For additional accessories, visit phoenixcontact.net/products. Cable housing, 3- to 15-pos.
Terminal blocks - CLIPLINE complete COMBI plug-in connection solutions - accessories Cable housing, 2- to 15-pos., snap-in to PP-H 2,5... and SP-H 2,5 connectors Cable housing, 2- to 10-pos., snap-in to PP-H 4 connector Cable housing, 2- to 7-pos., snap-in to PP-H 6 connector Technical data Technical data Technical data PA PA Ordering data Type Order No. Pcs. / Pkt.
Terminal blocks - CLIPLINE complete COMBI plug-in connection solutions - accessories Self-locking flange cover General data Insulating material The secure latching protects the connectors from coming loose by mistake.
Terminal blocks - CLIPLINE complete COMBI plug-in connection solutions - accessories Self-locking flange cover Self-locking flange Technical data Technical data PA PA Ordering data Ordering data Type Order No. Pcs. / Pkt. DFS-SPB 2,5 DFS-SPDB 2,5 DFS-SP-H 2,5 3061444 3061457 3061431 50 50 50 Type Order No. Pcs. / Pkt.
Terminal blocks - CLIPLINE complete COMBI plug-in connection solutions - accessories Screw flange and flange cover Screw flange cover Technical data The secure latching protects the connectors from coming loose by mistake.
Terminal blocks - CLIPLINE complete COMBI plug-in connection solutions - accessories Screw flange Screw flange Screw flange Technical data Technical data 0.4 - 0.5 PA Technical data 0.4 - 0.5 PA Ordering data 0.4 - 0.5 PA Ordering data Type Order No. Pcs. / Pkt.
PHOENIX CONTACT
RT... bolt connection terminal blocks The RT... bolt connection terminal blocks have been developed with a robust design and for the convenient wiring of ring cable lugs. The key feature of these terminal blocks is the hinged cover which can be swung up and which features a captive cap nut. This ensures quick and easy ring cable lug wiring. The integrated screw locking in the form of a spring retainer guarantees safe use, even in applications which are subject to shock and vibration.
Terminal blocks - CLIPLINE complete RT... bolt connection terminal blocks Robust and zero-maintenance The bolt connection technology is used in numerous applications. The benefits are: – Robust contact – Zero maintenance thanks to integrated screw retention – Multiple conductor connection 324 PHOENIX CONTACT Snap-on PE foot Ground terminals of the same shape are simply snapped onto the DIN rail in order to make contact.
Terminal blocks - CLIPLINE complete RT... bolt connection terminal blocks The reducing bridge enables a simple connection of terminal blocks with different nominal cross sections, e.g., an RT 8 with an RT 3 terminal block. Power blocks can be created quickly using the reducing bridge. The double function shaft can be used to connect any number of terminal blocks with two-position bridges. The 2 to 50-pos. bridges allow up to 50 terminal blocks to be bridged in one step.
Terminal blocks - CLIPLINE complete RT... bolt connection terminal blocks RT ... feed-through terminal blocks RT ...
Terminal blocks - CLIPLINE complete RT... bolt connection terminal blocks For further information and full technical data, visit phoenixcontact.
Terminal blocks - CLIPLINE complete 2.5 mm2 RT... bolt connection terminal blocks General technical data for 2.5 mm2 RT... bolt connection terminal blocks Rated data IEC 60947-7-1 / IEC 60947-7-2 Rated cross section [mm²] 2.5 Cross section range AWG 26 - 14 Connection capacity, DIN 46234 Cable lugs, DIN 46234 [mm²] 0.5 - 2.5 Connection bolt / hole diameter / width [mm] 3 / 3.2 / 6 Connection capacity, DIN 46237 Cable lugs DIN 46237 [mm²] 1 - 2.5 Connection bolt / hole diameter / width [mm] 3 / 3.
Terminal blocks - CLIPLINE complete 2.5 mm2 RT... bolt connection terminal blocks Feed-through terminal blocks and ground terminals ① ① ② ② Notes: 1) For additional accessories and technical data, see page 328. When using multi-position PS-... test plugs that are mounted side by side, one DP PS-... spacer plate with the same pitch must be used alternately to achieve the terminal block width, see page 346. For CARRIER 35-8 separating disk with storage option for jumpers, visit phoenixcontact.
Terminal blocks - CLIPLINE complete 6 mm2 RT... bolt connection terminal blocks General technical data for 6 mm2 RT... bolt connection terminal blocks Rated data IEC 60947-7-1 / IEC 60947-7-2 Rated cross section [mm²] 6 Cross section range AWG 26 - 10 Connection capacity, DIN 46234 Cable lugs, DIN 46234 [mm²] 0.5 - 6 Connection bolt / hole diameter / width [mm] 5 / 5.3 / 10 Connection capacity, DIN 46237 Cable lugs DIN 46237 [mm²] 1-6 Connection bolt / hole diameter / width [mm] 5 / 5.
Terminal blocks - CLIPLINE complete 6 mm2 RT... bolt connection terminal blocks Feed-through terminal blocks and ground terminals Notes: 1) For additional accessories and technical data, see page 330. ① ① ② ② For information on installation and using accessories for Ex applications, see page 602. 41 A, feed-through terminal block 41 A, feed-through terminal block, open Ex: Ex: PTB 09ATEX1003U / IECEx PTB 08.0063U PTB 09ATEX1003U / IECEx PTB 08.0063U Width 16.3 Imax.
Terminal blocks - CLIPLINE complete 6 mm2 RT... bolt connection terminal blocks Test disconnect terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 330. 2) Rated voltage for 500 V open disconnect point. 41 A, test disconnect terminal block 41 A, test disconnect terminal block, open ABS ABS Technical data1) Dimensions Max. electrical data Max.
Terminal blocks - CLIPLINE complete 6 mm2 RT... bolt connection terminal blocks Test disconnect terminal blocks new new ① ① Notes: 1) For additional accessories and technical data, see page 330. 41 A, test disconnect terminal block 41 A, test disconnect terminal block, with transparent shock protection cover Technical data1) Dimensions [mm] Max. electrical data Max.
Terminal blocks - CLIPLINE complete 35 mm2 RT... bolt connection terminal blocks General technical data for 35 mm2 RT... bolt connection terminal blocks Rated data IEC 60947-7-1 Rated cross section [mm²] 35 Cross section range AWG 14 - 2 Connection capacity, DIN 46234 Cable lugs, DIN 46234 [mm²] 2.5 - 35 Connection bolt / hole diameter / width [mm] 8 / 8.4 / 16 Connection capacity, DIN 46237 Cable lugs DIN 46237 [mm²] 2.5 - 6 Connection bolt / hole diameter / width [mm] 8 / 8.4 / 14 Color code blue 2.
Terminal blocks - CLIPLINE complete 35 mm2 RT... bolt connection terminal blocks Feed-through terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 334. For information on installation and using accessories for Ex applications, see page 602. 125 A, feed-through terminal block 125 A, feed-through terminal block, open Ex: Ex: PTB 09ATEX1003U / IECEx PTB 08.0063U PTB 09ATEX1003U / IECEx PTB 08.0063U Width 20.3 Imax.
PHOENIX CONTACT
Accessories The CLIPLINE complete system offers you a uniform range of accessories for all connection technologies. Marking and test accessories are standardized and reduce logistics costs. In addition, all terminal blocks of the CLIPLINE complete system can be freely combined with each other using the double function shaft. All disconnect terminal blocks in the CLIPLINE complete system have a standardized disconnect zone. Various function plugs are available for use in the disconnect terminal blocks.
Terminal blocks - CLIPLINE complete Accessories Function shaft All the terminal blocks in the CLIPLINE complete system have function shafts to allow fast and individual potential distribution through jumpers and simple testing. 338 PHOENIX CONTACT Multifunctional disconnect zone All the disconnect terminal blocks in the CLIPLINE complete system have a standardized disconnect zone. Various functional inserts are available for use in the disconnect terminal blocks.
Terminal blocks - CLIPLINE complete Accessories The bridge shafts are arranged in a line across all terminal blocks allowing for a combination of connection technologies. The 2- to 50-pos. jumpers allow all potential bridging tasks to be undertaken at speed. A jumping bridge is created by removing individual contact guides from the standard bridge. Two potentials can then be routed in parallel. The contact points can also be marked.
Terminal blocks - CLIPLINE complete Accessories FBS... jumpers Notes: The current values for the FBS ... bridges can deviate when used in different terminal blocks. The precise values can be found in the accessories data for the respective terminal blocks. Jumper, red Ordering data – To allow individual potential distribution, the terminal blocks of the CLIPLINE complete system have two bridge shafts – The 2- to 50-pos.
Terminal blocks - CLIPLINE complete Accessories Type Jumper, blue Jumper, gray Vertical potential bridge to connect two levels of multi-level terminal blocks Ordering data Ordering data Ordering data Imax Order No. Pcs. / Pkt. Type Imax Order No. Pcs. / Pkt. FBS 2-3,5 BU FBS 3-3,5 BU FBS 4-3,5 BU FBS 5-3,5 BU FBS 10-3,5 BU FBS 20-3,5 BU FBS 50-3,5 BU 17.
Terminal blocks - CLIPLINE complete Accessories FBSR(H) ... jumpers and SB–ME... switching jumpers Notes: The switching jumpers also snap into the function shaft and occupy both bridge shafts. The FBSR ... bridges have a reduced current carrying capacity in comparison with the standard FBS ... bridges. Jumper Ordering data FBSRH – The FBSRH ...-8 bridges have a molded extraction tool which means that they can be used conveniently and without tools for individual bridging tasks.
Terminal blocks - CLIPLINE complete Accessories Jumper, with extraction tool 30 A, switching jumper, plug-in with additional latching 25 A switching jumper, plug-in Ordering data Ordering data Ordering data Type FBSRH 2-8 FBSRH 3-8 FBSRH 4-8 Imax Order No. Pcs. / Pkt. 32 A 3033802 3033803 3033804 10 10 10 Type SB-ME 2-8 SB-ME 3-8 SB-ME 4-8 Accessories CARRIER 35-8 Imax 30 A Accessories 3034387 Order No. 3034468 3032800 3034484 Pcs. / Pkt. Imax Order No. Pcs. / Pkt.
Terminal blocks - CLIPLINE complete Accessories Example of a 10 mm2 central supply with reducing bridges RB UT 10-(2,5/4) to 2.5 mm2 D-STU 2,5-TWIN D-UT 2,5/10 Reducing bridges with UT... standard feed-through terminal blocks Supply Pick-off Terminal block Cross section [mm2] UT 4 4 Single-sided supply Central supply Cross section [mm2] Imax. [A] Imax. [A] UT 2,5 2.5 24 24 UT 2,5 2.5 40 56 PT 2,5 2.
Terminal blocks - CLIPLINE complete Accessories Reducing bridges with PT... and ST... standard feed-through terminal blocks Supply Terminal block Pick-off Cross section [mm2] ST 2,5 PT 2,5 2.5 ST 4 PT 4 4 ST 6 PT 6 6 Single-sided supply Central supply Cross section [mm2] Imax. [A] Imax. [A] PT 1,5/S 1.5 24 30 RB ST (2,5/4)-1,5/S 3214356 ST 1,5 1.5 31 31 RB ST (2,5/4)-1,5 3038943 QTC 1,5 1.5 31 31 FBS 2-5 3030161 PT 1,5/S 1.5 24 40 RB ST (2,5/4)-1,5/S 3214356 ST 1,5 1.
Terminal blocks - CLIPLINE complete Accessories PS... test plug – Two-part test plug for individual connector color combination – The test plugs are plugged in the function shaft of the terminal blocks from the CLIPLINE complete system or in the test connections provided for them. – The modular test plug housings PS-...2,3MM can be used to put together individual test adapters Ordering data Description Color Modular test plug housing, for MPS metal part, can be marked with ZB 5 5.2 mm width red Width 6.
Terminal blocks - CLIPLINE complete Accessories PAI... test adapter – Secure contact for test plugs with a 4 mm diameter in the function shaft – The small external diameter of the test socket means that touch-proof safety plugs can also be used Notes: 1) Touch-proof against unintentional direct contact according to DIN EN 50274 when plugged in. Description Test adapter, 4 mm test socket hole1) 4 mm test adapter, for terminal blocks with 4.2 mm pitch 4 mm test adapter, for terminal blocks with 5.2, 6.
Terminal blocks - CLIPLINE complete Accessories PAIS ... test plug Notes: 1) Touch-proof against unintentional direct contact according to DIN EN 50274 when plugged in. – Angled test plug for accommodating safety test plugs with a 4 mm diameter – Makes contact and latches securely at any point in the function shaft Ordering data Description Color Type Order No. Pcs. / Pkt. gray black red PAIS-4-FIX GY PAIS-4-FIX BK PAIS-4-FIX RD 3032791 3032792 3032793 10 10 10 Type Order No. Pcs. / Pkt.
Terminal blocks - CLIPLINE complete Accessories P-FU ... fuse plugs – Large-scale marking option – Versions with bipolar defect indicator – Test contacts on both sides of the fuse Notes: 1) If the fuse is faulty, the downstream circuit is not off load. 2) For max. power dissipation, see page 616. 5.2 mm fuse plug, for 5 x 20 mm cartridge fuses 8.2 mm fuse plug, for 6.
Terminal blocks - CLIPLINE complete Accessories S-MT switching lock Switching lock Technical data Dimensions General data Insulating material Inflammability class according to UL 94 – The optional switching lock snaps in and effectively prevents accidental switching – Can be used in all ...-MT knife disconnect terminal blocks from the CLIPLINE complete system P-DI isolating plug [mm] Width 3.5 Length 10.5 Height 23.1 PA V2 Ordering data Description Color Type Order No. Pcs. / Pkt.
Terminal blocks - CLIPLINE complete Accessories Through connector P–FIX Notes: 1) Observe max. load current. Feed-through connector Technical data Dimensions – The P-FIX contact metal seals the disconnect point with the same shape and cannot be removed again once fitted – Can be used in all ...-TG disconnect terminal blocks from the CLIPLINE complete system Component connectors P–CO ...
Terminal blocks - CLIPLINE complete Accessories Marker carrier for STP ... multi-level terminal blocks Marker carriers Technical data STP ... – The marking areas of wired multiple-level terminal blocks are increased in size using the marker carriers – Depending on version, the marker carriers are placed in the receivers on the upper terminal block level STP ...
Terminal blocks - CLIPLINE complete Accessories GBS ... terminal block group marking – Space-saving group marking directly on the terminal block – Fits all terminal blocks with tall center marker groove – Large-surface marking with labels or manually using B–STIFT or X–PEN General data Material Inflammability class according to UL 94 Temperature range Components [°C] 3.5 mm and 5.2 mm pitch 29 mm pitch Technical data Technical data PA V2 -40 ... 120 free from silicone and halogen PA / PC V2 -40 ...
Terminal blocks - CLIPLINE complete Accessories You can save time when securing electrical connections and components in switchgear by using suitable mounting devices. Make the best use of space in the control cabinet by cleverly combining mounting accessories. The DIN rails form the basis of the control cabinet inner workings. They ensure that the DIN railmountable components are held securely. Phoenix Contact provides a wide range of standardized rails made of various materials.
Terminal blocks - CLIPLINE complete Accessories For control cabinet engineering applications, the key features of the NS 15 and NS 35 DIN rails are their high degree of dimensional accuracy and double surface tempering. They are galvanized and feature thick layer passivation, which makes them RoHS compliant. Used in conjunction with the NS 15 and NS 35 DIN rails, the end brackets ensure that the components remain securely attached to the rails.
PHOENIX CONTACT
UK universal terminal blocks, SK ... shield terminals Universal terminal blocks Screw connections continue to dominate industrial connection technology. No other connection technology can achieve such high contact forces in a confined space. Our UK universal terminal block series, which has been accepted throughout the world, is named after the universal snap-on foot for DIN and G-profile rails, as well as the multiconductor connection.
Terminal blocks UK universal terminal blocks Universal and zero-maintenance The UK screw connection is characterized by three main features. – Global standard – Multiple conductor connection – Zero maintenance thanks to Reakdyn principle. 358 PHOENIX CONTACT Universal housing foot The universal foot allows the terminal blocks to be easily snapped onto two popular DIN rail profiles, the NS 35 DIN rail or the NS 32 DIN rail with G shape.
Terminal blocks UK universal terminal blocks If used with the corresponding fixed bridges, the STL... step brackets allow terminal blocks with different nominal cross sections to be connected. This allows power blocks to be created with ease. Any number of positions can be easily disconnected from a 10-pos. strip of the fixed bridge with isolation cap FBI ..., placed in the bridge shaft and screwed down. The L bridges LB ...
Terminal blocks UK universal terminal blocks UK ... feed-through terminal blocks Notes: For more insertion bridges, visit phoenixcontact.net/products 1) For information on installation and using accessories for Ex applications, see page 602. 1.5 (1.5) mm², 17.5 A, feed-through terminal block Ex: KEMA 98ATEX1651 U / IECEx KEM 06.
Terminal blocks UK universal terminal blocks 2.5 (4) mm², 24 A, feed-through terminal block 2.5 (4) mm², 32 A, feed-through terminal block CCA Ex: CCA Ex: 4 (6) mm², 41 A, feed-through terminal block CCA Ex: KEMA 06ATEX0119 U / IECEx KEM 06.0034U KEMA 98ATEX1651 U / IECEx KEM 06.0034U KEMA 98ATEX1651 U / IECEx KEM 06.0034U Width 5.2 Width 5.2 Imax. [A] 24 IEC 60947-7-1 Length 42.5 Length 42.5 Umax.
Terminal blocks UK universal terminal blocks UK ... feed-through terminal blocks – All universal terminal blocks from the UK... series can also be used in the area at risk of explosion according to IEC/EN 60079 as standard – The corresponding EC sample test certificate numbers for Ex approval can be found in the technical connection data Notes: 1) For information on installation and using accessories for Ex applications, see page 602.
Terminal blocks UK universal terminal blocks 10 (16) mm², 76 A, feed-through terminal block CCA Ex: 16 (25) mm², 101 A, feed-through terminal block CCA Ex: 35 (35) mm², 125 A, feed-through terminal block KEMA 98ATEX1786U / IECEx KEM 06.0029U KEMA 98ATEX1786U / IECEx KEM 06.0029U Width 10.2 Width 10.2 Imax. [A] 76 IEC 60947-7-1 Length 42.5 Length 42.5 Umax. [V] 800 Height NS 35/7,5 47.3 Height NS 32 52.3 Max. Ø [mm²] AWG (UL) 0.
Terminal blocks UK universal terminal blocks USLKG ... ground terminals Notes: 1) For information on installation and using accessories for Ex applications, see page 602. 1.5 (1.5) mm², ground terminal 2.5 (4) mm², ground terminal Ex: CCA Ex: KEMA 99ATEX4487U / IECEx KEM 06.0035U KEMA 96ATEX4370 U / IECEx KEM 06.0035U Width 4.2 Width 4.2 Technical data Dimensions Dimensions Max. electrical data [mm] [mm] Height NS 35/7,5 42 Height NS 32 47 Max.
Terminal blocks UK universal terminal blocks 2.5 (4) mm², ground terminal 4 (6) mm², ground terminal CCA Ex: CCA Ex: KEMA 97ATEX1622 U / IECEx KEM 06.0035U KEMA 99ATEX4487U / IECEx KEM 06.0035U Width 5.2 Width 5.2 Technical data CCA Ex: KEMA 96ATEX4370 U / IECEx KEM 06.0035U Technical data Length 42.5 Length 42.5 Height NS 35/7,5 47 Height NS 32 52 Max. Ø [mm²] AWG (UL) 0.2 - 4 28-12 Width 6.2 Width 6.2 IEC UL CSA 2.
Terminal blocks UK universal terminal blocks USLKG ... ground terminals Notes: 1) For information on installation and using accessories for Ex applications, see page 602. 10 (16) mm², 76 A, ground terminal CCA Ex: KEMA 99ATEX4487U / IECEx KEM 06.0035U Technical data Dimensions Dimensions Max.
Terminal blocks UK universal terminal blocks 16 (25) mm², 101 A, ground terminal 35 (35) mm², 125 A, ground terminal Ex: EAC Ex KEMA 99ATEX4487U / IECEx KEM 06.0035U Technical data Technical data Width 12.2 Width 12.2 Imax. [A] 101 IEC 60947-7-2 Length 42.5 Length 42.5 Height NS 35/7,5 54 Height NS 32 59 Max. Ø [mm²] AWG (UL) 2.5 - 25 22-4 Width 16 Width 16 Imax. [A] 125 IEC 60947-7-2 Length 53.4 Length 53.4 Height NS 35/7,5 62 Height NS 32 Max.
Terminal blocks UK universal terminal blocks Feed-through terminal blocks with 3 UK...–TWIN and UK 10–PLUS connections Notes: If UK universal terminal blocks are added to the open side of the UK 3-TWIN and UK 5-TWIN, the open metal part must be closed with the UK 5–TWIN DECKELSEGMENT, five of which are supplied with every package. 1) Tap: 41 A / 6 mm² 2.5 (2.
Terminal blocks UK universal terminal blocks 4 (4) mm², 32 A, feed-through terminal block, 3 connections CCA Ex: 10 (16) mm², 76 A, feed-through terminal block, 3 connections CCA Technical data 10 (16) mm², 76 A, feed-through terminal block, with tap Technical data Technical data Width 6.2 Width 6.2 Imax. [A] 32 IEC 60947-7-1 Length 50.5 Length 50.5 Umax. [V] 500 Height NS 35/7,5 47 Height NS 32 52 Max. Ø [mm²] AWG (UL) 0.2 - 4 30-10 Width 10.2 Width 10.
Terminal blocks UK universal terminal blocks Ground terminals with 3 UK...–TWIN–PE and UK 10–PLUS–PE connections Notes: 1) The max. load current must not be exceeded by the total current of all connected conductors. 2) Tap: 41 A / 6 mm² 2.5 (2.5) mm², ground terminal, 3 connections Technical data Dimensions – Same shape and pitch as the feed-through terminal blocks – Universal ground conductor foot for mounting on NS 35...- or NS 32... DIN rails (with the exception of NS 35/15–2,3) – Bridges LB ...
Terminal blocks UK universal terminal blocks 4 (4) mm², ground terminal, 3 connections CCA 10 (16) mm², 76 A, ground terminal, 3 connections 10 (16) mm², 76 A, ground terminal, with tap and PE foot CCA Technical data Technical data Width 6.2 Width 6.2 Length 50.5 Length 50.5 IEC 60947-7-2 IEC Height NS 35/7,5 47 Height NS 32 52 Max. Ø [mm²] AWG (UL) 0.2 - 4 30-10 UL CSA 4 24 - 12 Solid 30-10 Stranded - 0.2 - 4 0.2 - 1.5 Solid 0.2 - 4 0.2 - 1.
Terminal blocks UK universal terminal blocks Feed-through and PE terminal blocks with 4 UDK ... connections – Two connection points on each side to accommodate several conductors – Double bridge shaft enables individual potential distribution and supply – Overall width 5.2 mm or 6.2 mm – UDK 3 and UDK 4 are of the same shape Ground terminal UDK ...
Terminal blocks UK universal terminal blocks 4 (6) mm², 32 A, feed-through terminal block, 4 connections 2.5 (4) mm², ground terminal, 4 connections 4 (6) mm², ground terminal, 4 connections Technical data Technical data Width 6.2 Width 6.2 Imax. [A] 32 IEC 60947-7-1 IEC Length 63.5 Length 63.5 Umax. [V] 630 Height NS 35/7,5 47 Height NS 32 52 Max. Ø [mm²] AWG (UL) 0.2 - 6 30-10 UL CSA 630 32 / 4 4 24 - 10 Solid 600 30 / 30-10 Stranded 0.2 - 6 0.2 - 1 2.5 0.2 - 4 0.2 - 1.
Terminal blocks UK universal terminal blocks UKK ... double-level terminal blocks – Compact double-level terminal blocks in nominal cross sections of 2.5 and 4 mm2 – One or two bridge shafts – Large-scale marking option – Even if fully wired, the level offset offers unobstructed access to the lower connection level 2.5 (4) mm², 32 A, double-level terminal block 2.
Terminal blocks UK universal terminal blocks 4 (4) mm², 32 A, double-level terminal block CCA 4 (4) mm², 32 A, double-level terminal block, both levels can be bridged Ex: CCA Technical data 4 (4) mm², 32 A, 800 V, double-level terminal block, both levels can be bridged Technical data Technical data Width 6.2 Width 6.2 Imax. [A] 32 IEC 60947-7-1 Length 56 Length 56 Umax. [V] 500 Height NS 35/7,5 62 Height NS 32 67 Max. Ø [mm²] AWG (UL) 0.
Terminal blocks UK universal terminal blocks UKKB 10 ... double-level terminal blocks – Can be bridged on both levels for all potential distribution tasks – Overall width of just 10.2 mm – One of the special features of the UKKB 10/2,5 is that it allows two 2.5 mm2 conductors to be connected in the upper level Notes: UKKB 10-PV: 70 A / 500 V 10 (16) mm², 76 A, double-level terminal block 10 (16) mm², 76 A, double-level terminal block, upper level with 2 x 2.
Terminal blocks UK universal terminal blocks Double-level ground terminals UKK 5–PE and UKKB 5–PE – Same shape and pitch as the feed-through terminal blocks – Even if fully wired, the level offset offers unobstructed access to the lower connection level – Universal ground conductor foot for mounting on NS 35...- or NS 32...
Terminal blocks UK universal terminal blocks Bridging cross-reference list Type Order No.
Terminal blocks UK universal terminal blocks UK 3-TWIN Page 368 UK 5-TWIN Page 369 UK 10-TWIN Page 369 UDK 3 Page 372 UDK 4 Page 373 UKK 3 Page 374 UKKB 3 Page 374 UKK 5 Page 375 UKKB 5 Page 375 UKKB 10 Page 376 Chain bridge KB ... chain bridge For further information and full technical data, visit phoenixcontact.
Terminal blocks UK universal terminal blocks Bridge cross-reference list Type Order No.
Terminal blocks UK universal terminal blocks UK 3-TWIN UK 5-TWIN UK 10-TWIN Page 368 Page 369 Page 369 Step bracket STL ... step bracket UDK 3 Page 372 UDK 4 Page 373 UKK 3 Page 374 UKKB 3 Page 374 UKK 5 Page 375 UKKB 5 Page 375 UKKB 10 Page 376 Short-circuit plug KSS ... short-circuit plug For further information and full technical data, visit phoenixcontact.
Terminal blocks UK universal terminal blocks Three-level and three-conductor initiator terminal blocks DIK 1,5 ... and DIKD 1,5 ... 2.5 (4) mm², 26 A, three-conductor initiator terminal block Technical data Dimensions The sensor and actuator conductors are wired in terminal boxes in order to reduce wiring costs. The positive and negative connections are grouped so that only the signal lines and one pair of conductors for the power supply need to be wired between the terminal box and the control.
Terminal blocks UK universal terminal blocks 2.5 (4) mm², 30 A, three-level terminal block 2.5 (4) mm², 30 A, three-level terminal block with two feed-through levels Technical data Width 6.2 Imax. [A] 30 IEC 60947-7-1 IEC Length 72.5 Umax. [V] 250 UL CSA 250 24 / 2.5 2.5 24 - 12 Solid 300 15 / 30-14 Stranded 300 15 / 28-14 0.2 - 4 0.2 - 1 4 0.2 - 2.5 0.2 - 1 2.5 Technical data Height NS 35/7,5 54.5 Max. Ø [mm²] AWG (UL) 0.
Terminal blocks UK universal terminal blocks Three-level and three-conductor initiator terminal blocks with LED display DIK 1,5 ... – Terminal blocks with LED displays in red and green are available for optical identification of the initiator and actuator wiring Notes: 1) Current and voltage are determined by the plug used. 2) LED display: Voltage 15–30 V DC, current 1–2.5 mA 3) The corresponding accessory is documented, see page 412. 2.
Terminal blocks UK universal terminal blocks 2.5 (4) mm², 30 A, three-level terminal block with LED display 2.5 (4) mm², 30 A, three-level terminal block with LED display Technical data Width 6.2 Imax. [A] 30 Length 72.5 Umax. [V] 250 IEC UL 250 24 / 2.5 2.5 24 - 12 IEC 300 15 / 30-14 UL / CUL Solid Stranded 0.2 - 4 0.2 - 1 4 0.2 - 2.5 0.2 - 1 2.5 Technical data Height NS 35/7,5 54.5 Max. Ø [mm²] AWG (UL) 0.2 - 4 30-14 Width 6.2 Imax.
Terminal blocks UK universal terminal blocks Three-level and three-conductor actuator terminal blocks with PE foot DOK 1,5... Notes: 1) Current and voltage are determined by the plug used. 2) LED display: Voltage 15–30 V DC, current 1–2.5 mA 3) The corresponding accessory is documented, see page 412. 2.5 (4) mm², 26 A, three-conductor actuator terminal block with PE foot Technical data Dimensions – Same shape as the three-level initiator terminal blocks DIK ...
Terminal blocks UK universal terminal blocks 2.5 (4) mm², 26 A, three-level terminal block with PE foot 2.5 (4) mm², 16 A, three-conductor actuator terminal block with disconnect zone and PE foot Technical data Technical data Width Length 6.2 62.5 Imax. [A] Umax. [V] 26 250 IEC 60947-7-1 / IEC 60947-7-2 IEC UL Height NS 35/7,5 54.5 Max. Ø [mm²] AWG (UL) 0.2 - 4 30-14 250 24 / 2.5 2.5 24 - 12 300 15 / 30-14 300 15 / 28-14 IEC UL / CUL CSA Solid Stranded 0.2 - 4 0.2 - 1 4 0.
Terminal blocks UK universal terminal blocks Four-conductor initiator and actuator terminal blocks VIOK 1,5... Notes: 1) Current and voltage are determined by the plug used. 2) When using EB insertion bridges, the nominal voltage is reduced to 250 V. 3) The corresponding accessory is documented, see page 412. 2.5 (4) mm², 26 A, four-conductor actuator terminal block with PE foot Technical data Dimensions VIOK 1,5 – This terminal block is a combination of a DIK ... and DOK ...
Terminal blocks UK universal terminal blocks 2.5 (4) mm², 26 A, four-conductor terminal block, both upper levels as feed-through levels 2.5 (4) mm², 26 A, four-level terminal block with PE foot Technical data Width 6.2 Imax. [A] 26 IEC 60947-7-1 IEC Length 73 Umax. [V] 250 UL CSA 250 24 / 2.5 2.5 24 - 12 300 15 / 30-14 300 15 / 28-14 IEC UL / CUL CSA Solid Stranded 0.2 - 4 0.2 - 1 4 0.2 - 2.5 0.2 - 1 2.5 Technical data Height NS 35/7,5 70 Max. Ø [mm²] AWG (UL) 0.
Terminal blocks UK universal terminal blocks Three and four-level terminal blocks with PE foot SLKK ... and DLK ... Notes: 1) The voltage is determined by the LED display (only for SLKK 5LA...) 4 (4) mm², 34 A, three-level terminal block with PE foot Technical data Dimensions Three-level terminal blocks SLKK 5...
Terminal blocks UK universal terminal blocks 2.5 (4) mm², 26 A, four-level terminal block with PE foot 2.5 (4) mm², 26 A, four-level terminal block with PE foot Technical data Width Length 6.2 83.5 Imax. [A] Umax. [V] 26 400 IEC 60947-7-1 / IEC 60947-7-2 IEC UL 400 24 / 2.5 2.5 24 - 12 Solid 300 15 / 30-14 Stranded 0.2 - 4 0.2 - 1 4 0.2 - 2.5 0.2 - 1 2.5 Technical data Height NS 35/7,5 70 Max. Ø [mm²] AWG (UL) 0.2 - 4 30-14 CSA IEC/ EN 60079-7 Ferrule without/with plastic sleeve 0.
Terminal blocks UK universal terminal blocks UK ...–HESI...N fuse/lever-type disconnect terminal blocks Notes: 1) If the fuse is faulty, the downstream circuit is not off load. 2) – Compact, space-saving design – Universal disconnect zone The current is determined by the fuse used, the voltage by the LED display. Observe max. power dissipation. + 4 (6) mm², 6.3 A, lever-type fuse terminal block, for 5 x 20 mm cartridge fuses Technical data Dimensions Width 8.2 Width 8.2 Imax. [A] 6.
Terminal blocks UK universal terminal blocks 4 (6) mm², 16 A, lever-type disconnect terminal block, same shape 4 (6) mm², 32 A, feed-through terminal block, same shape Technical data Width 8.2 Width 8.2 Imax. [A] 16 IEC 60947-7-1 IEC Length 58 Length 58 Umax. [V] 500 UL CSA 500 16 / 1.5 4 20 - 10 Solid 600 16 26-10 Stranded - 0.5 - 6 0.5 - 1.5 4 0.5 - 4 0.5 - 1.5 4 Technical data Height NS 35/7,5 50 Height NS 32 55 Max. Ø [mm²] AWG (UL) 0.
Terminal blocks UK universal terminal blocks Lever-type fuse terminal blocks UKK ...–HESI Notes: For further technical notes on power dissipation, refer to page 616. 1) If the fuse is faulty, the downstream circuit is not off load. 2) The current is determined by the fuse used, the voltage by the LED display. Observe max. power dissipation. 4 (4) mm², 6.
Terminal blocks UK universal terminal blocks 16 (16) mm², 10 A, lever-type fuse terminal block for 6.3 x 32 mm cartridge fuses Technical data Width 10.2 Width 10.2 Imax. [A] 102) IEC 60947-7-3 IEC Length 79 Length 79 Umax. [V] 5002) Height NS 35/7,5 60.5 Height NS 32 65.5 Max. Ø [mm²] AWG (UL) 0.5 - 16 26-8 UL CSA 5002) 102) / 1.5 16 20 - 6 Solid 600 10 / 26-8 Stranded 600 25 / 26-8 0.5 - 16 0.5 - 4 10 0.5 - 16 0.5 - 4 10 IEC/ EN 60079-7 Ferrule without/with plastic sleeve 0.5 - 10 0.
Terminal blocks UK universal terminal blocks Double-level terminal blocks with safety levers UKK ...–HESI Notes: For further technical notes on power dissipation, refer to page 616. 1) – Compact double-level fuse terminal block – Safety levers and each terminal point can be individually marked – For 5 mm and 6.3 mm cartridge fuse inserts – Versions with LED display If the fuse is faulty, the downstream circuit is not off load.
Terminal blocks UK universal terminal blocks 4 (4) mm², 32 A, double-level terminal block with fuse lever for 6.3 x 32 mm cartridge fuse Technical data Width 8.2 Width 8.2 Imax. [A] 322) IEC 60947-7-1 IEC Length 86.5 Length 86.5 Umax. [V] 4002) Height NS 35/7,5 79 Height NS 32 84 Max. Ø [mm²] AWG (UL) 0.2 - 4 26-10 UL / CUL CSA 4002) 322) / 4 4 24 - 12 IEC 60947-7-3 IEC 600 30 / 26-10 300 15 28-10 UL / CUL CSA 4002) 102) / 1.5 4 24 - 12 Solid 600 15 / 26-10 Stranded 0.2 - 4 0.2 - 1.5 4 0.
Terminal blocks UK universal terminal blocks Fuse terminal blocks with screw cap UK 10-DREHSI Notes: For further technical notes on power dissipation, refer to page 616. 1) – Bridgeable with FBI ... fixed bridge – Fuse terminal block with screw cap for 5 x 20, 5 x 25 or 6.
Terminal blocks UK universal terminal blocks 16 (16) mm², 10 A, fuse terminal block for 5 x 25 mm cartridge fuses with indicating pin 16 (16) mm², 10 A, fuse terminal block for 6.3 x 32 mm cartridge fuses CCA Technical data Width 12 Width 12 Imax. [A] 102) IEC 60947-7-3 IEC Length 62 Length 62 Umax. [V] 5002) UL CSA 5002) 102) / 1.5 16 20 - 6 Solid 300 20 / 24-6 Stranded - 0.5 - 16 0.5 - 4 10 0.5 - 16 0.5 - 4 10 Technical data Height NS 35/7,5 57.2 Height NS 32 62.2 Max.
Terminal blocks UK universal terminal blocks UK-SI and USIG fuse terminal blocks – In the case of the UK-SI fuse terminal block, the cartridge fuse-links are connected with the integrated connector in the terminal block Notes: 1) If the fuse is faulty, the downstream circuit is not off load. 2) The current and voltage are determined by the fuse. For further technical notes on power dissipation, refer to page 616.
Terminal blocks UK universal terminal blocks Fuse terminal block UK 6-FSI/C, for type C flat-type fuses Notes: 1) If the fuse is faulty, the downstream circuit is not off load. 2) For derating curve, visit phoenixcontact.net/products 3) The current and voltage are determined by the fuse. For corresponding fuse inserts, see Catalog 6. The recommended continuous load capacity of the fuse inserts according to DIN 72581/Part 3 is max.
Terminal blocks UK universal terminal blocks UKK ...-HESI lever-type fuse terminal blocks – The UK ...-HESI fuse terminal blocks are used to accommodate fuse inserts that are mainly used in the USA – 56-pos.
Terminal blocks UK universal terminal blocks 25 (25) mm², 30 A, lever-type fuse terminal block for CLASS CC 10.3 x 38 mm Technical data Width 18 Imax. [A] 302) Length 81 Umax. [V] 6002) Height NS 35/7,5 65.5 Max. Ø [mm²] AWG (UL) 1.5 - 25 - IEC UL CSA 6002) 322) / 25 25 16 - 4 Solid Stranded 600 30 / 18-4 IEC/ EN 60079-7 Ferrule without/with plastic sleeve 1.5 - 16 1.5 - 16 1.5 - 4 1.5 - 10 - 1.5 - 25 1.5 - 4 10 1.5 - 25 1.5 - 4 10 Class CC 12 M5 2.
Terminal blocks UK universal terminal blocks UK 10,3-HESI 1000V lever-type terminal blocks for photovoltaics – Terminal blocks for protecting PV strings – Particularly suitable for protecting monocrystalline and polycrystalline modules – Suitable for standard 10.
Terminal blocks UK universal terminal blocks 10.3 x 38 mm midget fuse inserts, 2 A – 20 A Technical data Width 10 Length 38 IEC 60269-6 IEC Height NS 35/7,5 Max. Ø [mm²] AWG (UL) - UL CSA Solid Stranded - - - IEC/ EN 60079-7 Ferrule without/with plastic sleeve - V0 Ordering data Type Order No. Pcs. / Pkt.
Terminal blocks UK universal terminal blocks UK screw connection - lever-type fuse terminal block for photovoltaics, 1500 V Fuse terminal block – Terminal block for protecting PV strings – Particularly suitable for protecting monocrystalline and polycrystalline modules – Suitable for standard 10.
Terminal blocks UK universal terminal blocks Fuse insert, 10.3 x 85 mm, 2 - 16 A, 1500 V Fuse insert, 10.3 x 85 mm, 20 - 25 A, 1200 V Technical data Width 10 Technical data Length 85 Umax. [V] 1500 Height NS 35/7,5 Max. Ø [mm²] AWG (UL) - UL CSA 1500 Solid Stranded - - - IEC 60269-6 IEC Width 10 IEC/ EN 60079-7 Ferrule without/with plastic sleeve - - IEC 60269-6 IEC Length 85 Umax. [V] 1200 Height NS 35/7,5 Max.
Terminal blocks UK universal terminal blocks Fuse terminal blocks for NEOZED® fuse-links USEN... – These fuse terminal blocks are designed for NEOZED® fuses – The NEOZED® system features an impressive high current-carrying capacity Notes: 1) Current carrying capacity of the insertion bridges in the case of center infeed: 120 A NEOZED® and DIAZED® are registered trademarks of Siemens AG.
Terminal blocks UK universal terminal blocks Fuse terminal blocks for DIAZED® fuse inserts USED ... Notes: NEOZED® and DIAZED® are registered trademarks of Siemens AG.
Terminal blocks UK universal terminal blocks Disconnect terminal blocks Notes: Three or four-conductor basic actuator terminal blocks DOK 1,5–TG, DOKD 1,5–TG and VIOK 1,5–D/TG/D/PE with disconnect function can be found on page 387 onwards. For fuse, component and isolating plugs, see page 412. 1) The current and voltage are determined by the component and fuse plug.
Terminal blocks UK universal terminal blocks 4 (4) mm², 16 A, disconnect terminal block 4 (6) mm², 16 A, disconnect terminal block Technical data Width 6.2 Width 6.2 Width 6.2 Imax. [A] 161) IEC 60947-7-1 IEC Length 42.5 Length 42.5 Length 42.5 Umax. [V] 5001) UL / CUL CSA 5001) 16 / 4 4 24 - 12 IEC 600 20 / 28-12 UL / CUL 600 15 / 28-12 CSA Solid Stranded 0.2 - 4 0.2 - 1.5 0.2 - 4 0.2 - 1.5 1.5 1.5 Technical data Height NS 35/7,5 47 Height NS 15 Height NS 32 52 Max.
Terminal blocks UK universal terminal blocks Connectors for disconnect terminal blocks in the UK series – The fuse plug ST-SI-UK 4 for 5 x 20 mm cartridge fuse inserts is available with and without a LED display – The component connector ST–BE is available as an individual connector for two-pos. components and as a double connector Notes: 1) If the fuse is faulty, the downstream circuit is not off load.
Terminal blocks UK universal terminal blocks Disconnect terminal block, isolating and fuse plugs – Compact, space-saving design – Universal disconnect zone Notes: 1) If the fuse is faulty, the downstream circuit is not off load. 2) Observe max. load current. 3) Observe max. load current, depending on the power dissipation of the components. Max. 0.5 W with single arrangement. 4) Current and voltage are determined by the plug used. For corresponding function plugs, see phoenixcontact.net/products.
Terminal blocks UK universal terminal blocks Component connector, BES 6 Notes: 1) Integrated: Diode 1N 4007, reverse voltage: 1300 V, maximum continuous current: 1.0 A Component connector Technical data PA V2 Ordering data Color Type Order No. Pcs. / Pkt.
Terminal blocks UK universal terminal blocks For further information and full technical data, visit phoenixcontact.
Terminal blocks UK universal terminal blocks MTK ... knife disconnect terminal blocks For maintenance work or rapid troubleshooting, these disconnect terminal blocks are used in measurement and control technology systems: – Convenient disconnect knife operation – Space-saving design – High current-carrying capacity up to 16 A – Versions with integrated test socket screws 2.5 (4) mm², 16 A, knife disconnect terminal block with test socket screw 2.
Terminal blocks UK universal terminal blocks 2.5 (4) mm², 16 A, feed-through terminal block, with test socket screw 4 (6) mm², 16 A, knife disconnect terminal block with test socket screw Technical data Width 5.2 Width 5.2 Imax. [A] 16 IEC 60947-7-1 IEC Length 46 Length 46 Umax. [V] 400 UL CSA 400 16 / 2.5 2.5 24 - 12 Solid 300 10 / 28-12 Stranded 600 20 / 28-12 0.2 - 4 0.2 - 1.5 4 0.2 - 2.5 0.2 - 1.5 2.5 Technical data Height NS 35/7,5 51.5 Height NS 32 56.5 Max.
Terminal blocks UK universal terminal blocks Knife disconnect terminal blocks – Convenient disconnect knife operation – Closed housing of double-level terminal blocks – The disconnect knife on the associated level is characterized by a slight vertical offset – Space-saving design just 6.
Terminal blocks UK universal terminal blocks 4 (4) mm², 8 A, feed-through terminal block, 3 connections, with two disconnect knives, test socket screw 4 (4) mm², 8 A, double-level terminal block, one disconnect knife per level, test socket screw Technical data Width 6.2 Width 6.2 Imax. [A] 8 IEC 60947-7-1 IEC Length 76.5 Length 76.5 Umax. [V] 400 UL 400 8/4 4 24 - 12 IEC 300 8/26-12 UL / CUL 8/4 Solid Stranded 0.2 - 4 0.2 - 1.5 - 0.2 - 4 0.2 - 1.
Terminal blocks UK universal terminal blocks Slide-type terminal block UGSK/S Test disconnect terminal block URTK/SS Dimensions – Simple and clear testing in current transformer secondary circuits can be undertaken with the slide-type terminal block UGSK/S for cross switching – Measurement equipment or protective relays can be individually activated with the aid of bridges and slides – For this purpose, the slides make contact with the switching jumper depending on the switching task – The URTK/SS allow t
Terminal blocks UK universal terminal blocks 4 (4) mm², 26 A, test disconnect terminal block 4 (4) mm², 26 A, test disconnect terminal block with test sockets 6 (10) mm², 57 A, slide-type terminal block Technical data Technical data Width 6.2 Width 6.2 Imax. [A] 26 IEC 60947-7-1 IEC Length 56.5 Length 56.5 Umax. [V] 400 Height NS 35/7,5 40 Height NS 32 45 Max. Ø [mm²] AWG (UL) 0.2 - 4 28-12 UL CSA 400 26 / 4 4 24 - 12 Solid 300 20 / 28-12 Stranded 300 25 / 28-12 0.2 - 4 0.2 - 1.5 - 0.
Terminal blocks UK universal terminal blocks Meas. transducer Test disconnect terminal block URTK/S... 1 2 1 2 1 2 1 2 k I k I k I k I b a c d Dimensions – Easy and clear testing in current transformer secondary circuits can be performed using the test disconnect terminal blocks of the URTK/S range – On both sides of the disconnect point, the terminal block has a test socket which can also be used to switch across to neighboring terminal blocks – The URTK/S–BEN ...
Terminal blocks UK universal terminal blocks 6 (10) mm², 57 A, test disconnect terminal block CCA 10 (16) mm², 76 A, test disconnect terminal block Technical data Technical data Width 8.2 Width 8.2 Imax. [A] 57 IEC 60947-7-1 IEC Length 72 Length 72 Umax. [V] 400 Height NS 35/7,5 51.5 Height NS 32 56.5 Max. Ø [mm²] AWG (UL) 0.5 - 10 26-8 UL CSA 400 41 / 6 6 20 - 8 Solid 300 50 / 26-8 Stranded 300 40 / 26-10 0.5 - 10 0.5 - 2.5 - 0.5 - 6 0.
Terminal blocks UK universal terminal blocks UK 6-T test disconnect terminal blocks Notes: For more test sockets, visit phoenixcontact.net/products – Easy and clear testing in the current transformer secondary circuits can be performed using the UK 6-T test disconnect terminal block – Compact design – Switching jumpers with and without test sockets CLIP PROJECT Planning enables the quick and convenient planning and configuration of fault-free terminal strips.
Terminal blocks UK universal terminal blocks new new 6 (10) mm², 57 A, disconnect terminal block 6 (10) mm², 57 A, feed-through terminal block Technical data Width 8.2 Width 8.2 Imax. [A] 57 IEC 60947-7-1 IEC Length 66.5 Length 66.5 Umax. [V] 500 UL CSA 500 41 / 6 6 20 - 8 Solid 600 30 26-8 Stranded - 0.5 - 10 0.5 - 2.5 - 0.5 - 6 0.5 - 4 - 6 (10) mm², 57 A, disconnect terminal block Technical data Height NS 35/7,5 48 Height NS 32 53 Max. Ø [mm²] AWG (UL) 0.
Terminal blocks UK universal terminal blocks Test disconnect terminal blocks and slide-type terminal blocks URTK 6 / UGSK 6 Notes: For other test sockets, see page 505. For corresponding AP-ME and AH-ME terminal strip covers, see Catalog 5.
Terminal blocks UK universal terminal blocks 6 (10) mm², 57 A, test disconnect terminal block 6 (10) mm², 57 A, slide-type terminal block 6 (10) mm², 57 A, feed-through terminal block, same shape Technical data Technical data Width 8.2 Width 8.2 Imax. [A] 57 IEC 60947-7-1 IEC Length 91 Length 91 Umax. [V] 400 Height NS 35/7,5 51 Height NS 32 56 Max. Ø [mm²] AWG (UL) 0.5 - 10 26-8 UL CSA 400 41 / 6 6 20 - 8 Solid 300 50 / 26-8 Stranded - 0.5 - 10 0.5 - 2.5 - 0.5 - 6 0.
Terminal blocks UK universal terminal blocks Test disconnect terminal blocks URTK/SP 1 2 1 2 1 2 1 2 k I k I k I k I b a c d Dimensions – Test disconnect terminal block URTK/SP should be used for all measurement and test work in the current transformer secondary circuits – The terminal blocks can be equipped with fixed and switchable bridges on both sides – Touch-proof test sockets with 4 mm diameter are already permanently integrated – The URTKD/SP can be used as a feedthrough termina
Terminal blocks UK universal terminal blocks 6 (10) mm², 50 A, test disconnect terminal block CCA 6 (10) mm², 50 A, feed-through terminal block, same shape Technical data Width 8.2 Width 8.2 Imax. [A] 50 IEC 60947-7-1 IEC Length 99.5 Length 99.5 Umax. [V] 500 UL CSA 500 41 / 6 6 20 - 8 Solid 300 45 / 26-8 Stranded 300 45 / 26-8 0.5 - 10 0.5 - 2.5 - 0.5 - 6 0.5 - 4 - Short-circuit plug Technical data Height NS 35/7,5 59 Height NS 32 64 Max. Ø [mm²] AWG (UL) 0.
Terminal blocks UK universal terminal blocks Screw connection test disconnect terminal block with UK 4-SD test isolating plug This disconnect terminal block offers numerous advantages especially for testing in measuring and signal circuits: – Simultaneous interruption of individual or multiple neighboring disconnect terminal blocks by using the PS 6-DI-SD isolating plug – Safe, uninterruptible looping in of measuring devices in the circuit with the aid of the PS 6–CT–SD test isolating plug – Safe contacting
Terminal blocks UK universal terminal blocks Isolating plug, disconnect function only 1.5 (2.5) mm² test isolating plug, contacts before the signal isolation Technical data Width 6.2 Width 6.2 Length 39.3 Length 39.3 Technical data Height NS 35/7,5 Height NS 32 Max. Ø [mm²] AWG (UL) 20-10 IEC UL CSA Solid 300 20-10 Stranded - - - IEC/ EN 60079-7 Ferrule without/with plastic sleeve - PA V0 Width 6.2 Width 6.2 Imax. [A] 8 IEC 60947-7-1 IEC Length 39.3 Length 39.3 Umax.
Terminal blocks UK universal terminal blocks Double-level diode terminal blocks UKK ... – Double-level diode terminal blocks with various forms of wiring are available for a huge range of applications – Electronic components can be individually soldered with UKK 5–BE Notes: 1) Integrated: Rectifier module B 250 C 1500, reverse voltage: 600 V, nominal voltage: 250 V, nominal current: 1.5 A 2) Max.
Terminal blocks UK universal terminal blocks Double-level terminal blocks with LED display UKK ... Notes: 1) The operating voltage is determined by the LED version. – The integrated LED display in UKK 5-LA ... indicates the voltage condition of the lower feed-through level – Available in three voltage levels up to 250 V 4 (4) mm², 32 A, double-level terminal block with LED Technical data Dimensions [mm] Dimensions [mm] Max. electrical data Height NS 35/7,5 62 Height NS 32 67 Max.
Terminal blocks UK universal terminal blocks Component terminal blocks UDK ... Notes: 1) The current is determined by the component used.
Terminal blocks UK universal terminal blocks LED display terminal blocks for voltage and current UDK ... UDK 4–ULA ... – An LED indicates the potential status of the feed-through circuit line – The LED return conductor is implemented with an RS busbar and UDK 4–ULA/EK power terminal UDK 4–ILA ... – For the 4 to 500 mA current range – If a load current flows through the load, this is indicated by the LED Notes: 1) Note load current diagram, see phoenixcontact.
Terminal blocks UK universal terminal blocks Thermoelectric voltage terminal block pair, MTKD-... Notes: 1) Voltage to the neighboring feed-through terminal MTK. For table for selecting thermoelectric voltage terminal blocks, visit phoenixcontact.net/products 2.
Terminal blocks UK universal terminal blocks GTF 76 ground disconnect terminal block 1 1 2 2 PE on PE off 6 (10) mm², 57 A, ground disconnect terminal block 3 4 3 4 Technical data Dimensions EN 60204-1/VDE 0113-1 "Electrical Equipment of Industrial Machines", Section 9.4.3.1 states: "Ground faults in a control circuit may not lead to an unintentional start-up, to potentially dangerous movements or prevent the stopping of a machine.
Terminal blocks UK universal terminal blocks with special connection Feed-through terminal blocks with flat plug connection UVKB ... and UHK ... Notes: For corresponding slip-on sleeves, see Catalog 5. 1) Current and voltage data for quick connect terminations according to EN 61210 are also dependent on nominal size, material, insulation of the coupling and conductor cross section.
Terminal blocks UK universal terminal blocks with special connection 4 (6) mm², 32 A, feed-through terminal block, with spade connection 4 (4) mm², 40 A, feed-through terminal block, with screw and slip-on connection 40 A, feed-through terminal block, with slip-on connection Technical data Width 6.2 Width 6.2 Imax. [A] 321) Length 68 Length 68 Umax. [V] 8001) Technical data Height NS 35/7,5 44 Height NS 32 49 Max. Ø [mm²] AWG (UL) 0.5 - 6 - Width 6.2 Width 6.2 Imax.
Terminal blocks UK universal terminal blocks with special connection Feed-through terminal blocks with slip-on connection VBST ... and PVB ... Notes: 1) Current and voltage data for quick connect according to EN 61210 are also dependent on nominal size, material, insulation of the coupling and conductor cross section. 2) Nominal current of the module connector per position: 13 A 2.
Terminal blocks UK universal terminal blocks with special connection Feed-through terminal blocks with slip-on connection USK ... Notes: 1) Current and voltage data for quick connect terminations according to EN 61210 are also dependent on nominal size, material, insulation of the coupling and conductor cross section. For corresponding slip-on sleeves, see Catalog 5.
Terminal blocks UK universal terminal blocks with special connection Double-level terminal blocks with screw/slip-on connection UKK ... Notes: Important note: The notched partition plate must be removed to bridge the terminal blocks. For corresponding slip-on sleeves, see Catalog 5. 1) Current and voltage data for quick connect terminations according to EN 61210 are also dependent on nominal size, material, insulation of the coupling and conductor cross section.
Terminal blocks UK universal terminal blocks with special connection 4 (6) mm², 20 A, double-level terminal block with slip-on connection Technical data Width 6.2 Width 6.2 Imax. [A] 201) Length 72 Length 72 Umax. [V] 4001) Height NS 35/7,5 59 Height NS 32 64 Max. Ø [mm²] AWG (UL) 0.5 - 6 - IEC UL CSA 4001) 201) / 4 4 20 - 10 Solid 300 20 / Stranded - IEC/ EN 60079-7 Ferrule without/with plastic sleeve - 0.5 - 6 - 0.5 - 6 - PA V0 Ordering data Type Imax UKK 4-FS/FS Order No. Pcs.
Terminal blocks UIK installation terminal blocks UIK ... installation terminal blocks For flexible combinations All installation terminal blocks for the various connection technologies (UTN, push-in, and STI) can be combined in any way. The neutral busbar is on one level across all installation terminal blocks.
Terminal blocks UIK installation terminal blocks UIK ...
Terminal blocks UIK installation terminal blocks Installation protective terminal blocks UISLKG ... – The standard protective terminal blocks USLKG 1,5 N to USLKG 16 N can be used in conjunction with the PEN conductor busbar Notes: Current carrying capacity of DIN rails, see page 608 16 (25) mm², 101 A, protective terminal block 35 (35) mm², 125 A, protective terminal block Technical data Dimensions Length 42.5 Length 42.5 Height NS 35/7,5 47 Height NS 32 52 Max. Ø [mm²] AWG (UL) 2.
Terminal blocks UIK installation terminal blocks Neutral disconnect terminal blocks UKN ... – With screw disconnect slide – Same shape as feed-through, ground conductor and installation terminal blocks Notes: Assembly instructions: For secure fastening of the neutral busbar, supports must be set at the beginning and end of each terminal strip as well as every 20 cm on longer terminal strips. 2.
Terminal blocks UIK installation terminal blocks Neutral disconnect terminal blocks UKN ... – With screw disconnect slide – Same shape as feed-through, ground conductor, and installation terminal blocks Notes: Assembly instructions: For secure fastening of the neutral busbar, supports must be set at the beginning and end of each terminal strip as well as every 20 cm on longer terminal strips.
Terminal blocks UIK installation terminal blocks Neutral disconnect terminal blocks UIKN ... – With screw disconnect slide – Same shape as feed-through, ground conductor, and installation terminal blocks Notes: Assembly instructions: For secure fastening of the neutral busbar, supports must be set at the beginning and end of each terminal strip as well as every 20 cm on longer terminal strips.
Terminal blocks SSK high-temperature terminal blocks Ceramic terminal blocks SSK Safe in all applications The SSK terminal blocks with ceramic isolation approved as standard for areas at risk of explosion are recommended for use anywhere with tough operating conditions, especially in terms of temperature and chemical aggressiveness.
Terminal blocks SSK high-temperature terminal blocks Ceramic feed-through terminal blocks SSK ... Notes: 1) For information on installation and using accessories for Ex applications, see page 602. – Compact design – Mounting on G DIN rail NS 32 – Secure snapping into place using snap lock in terminal block foot – Simple potential distribution thanks to chain bridging 2.5 (4) mm², 32 A, feed-through terminal block Ex: KEMA 03ATEX2382U / IECEx KEM 06.0045U Technical data Dimensions [mm] Max.
Terminal blocks SSK high-temperature terminal blocks Ceramic feed-through terminal blocks SSK ... Notes: 1) For information on installation and using accessories for Ex applications, see page 602. – Compact design – Mounting on G DIN rail NS 32 – Secure snapping into place using snap lock in terminal block foot – Simple potential distribution thanks to chain bridging 6 (10) mm², 57 A, feed-through terminal block Ex: KEMA 03ATEX2382U / IECEx KEM 06.0045U Technical data Dimensions [mm] Max.
Terminal blocks SSK high-temperature terminal blocks 10 (16) mm², 76 A, feed-through terminal block Ex: 35 (35) mm², 125 A, feed-through terminal block Ex: KEMA 03ATEX2382U / IECEx KEM 06.0045U KEMA 03ATEX2382U / IECEx KEM 06.0045U Width 10.4 Imax. [A] 76 IEC 60947-7-1 Length 38 Umax. [V] 630 Height NS 32 55 Max. Ø [mm²] 0.5 - 16 Width 15.3 Imax. [A] 125 IEC 60947-7-1 Length 53 Umax. [V] 800 Height NS 32 67 Max.
Terminal blocks USST spring-assisted screw terminal blocks USST ... spring-assisted screw terminal blocks Spring-assisted screw connection The opened terminal block body is pressed down to make contact with the conductor. Tightening the terminal screw produces the perfect electric connection. 454 PHOENIX CONTACT Hooked cable lug This cable lug is shaped like a hook, allowing it to lock in the spring in the terminal block body for a secure connection.
Terminal blocks USST spring-assisted screw terminal blocks Spring-assisted feed-through terminal block USST 4 – The USST... terminal blocks were developed especially for use in the energy supply sector – When combined with hook-type cable lugs, the spring-assisted screw terminal blocks optimally meet the technical requirements of ENATS 50-18 – Universal foot for mounting on NS 32 and or NS 35 DIN rails – The bridge bar isolator switching jumpers ISSBI ... enable switchable cross connections with IS-K ... .
Terminal blocks USST spring-assisted screw terminal blocks Spring-assisted feed-through terminal block USST 6 and USST 10 – Terminal blocks USST 4 to USST 10 are of the same shape Notes: For other test sockets, see page 505. 6 (10) mm², 57 A, feed-through terminal block 10 (16) mm², 76 A, feed-through terminal block Technical data Dimensions Length 52 Length 52 Umax. [V] 500 Height NS 35/7,5 57.3 Height NS 32 62.3 Max. Ø [mm²] AWG (UL) 0.
Terminal blocks USST spring-assisted screw terminal blocks Spring-assisted disconnect and knife disconnect terminal blocks – Standardized disconnect zone – Various function plugs are available for use in the disconnect terminal blocks – For corresponding function plugs, see page 350 Notes: 1) Umax. 300 V. Corresponding flat-ribbon cable lugs with C-BCI ... hooks can be found in Catalog 5 or at phoenixcontact.
Terminal blocks USST spring-assisted screw terminal blocks Spring-assisted test disconnect and feed-through terminal blocks Notes: For more test sockets, visit phoenixcontact.net/products For more short-circuit plugs, visit phoenixcontact.
Terminal blocks USST spring-assisted screw terminal blocks 6 (10) mm², 57 A, feed-through terminal block, same shape Technical data Width 8.2 Width 8.2 Imax. [A] 57 IEC 60947-7-1 IEC Length 82 Length 82 Umax. [V] 500 Height NS 35/7,5 52 Height NS 32 57 Max. Ø [mm²] AWG (UL) 0.2 - 10 24-10 UL CSA 500 41 / 6 6 24 - 8 Solid 600 30 / 24-10 Stranded - 0.2 - 10 0.2 - 2.5 - 0.2 - 6 0.2 - 2.5 - IEC/ EN 60079-7 Ferrule without/with plastic sleeve 0.25 - 6 0.25 - 6 0.25 - 1.5 0.5 - 4 12 M4 1.5 - 1.
Terminal blocks USST spring-assisted screw terminal blocks Spring-assisted test disconnect and feed-through terminal blocks new new Notes: 1) For additional test sockets, visit phoenixcontact.net/products 6 (10) mm², 50 A, test disconnect terminal block 6 (10) mm², 50 A, feed-through terminal block, same shape Technical data Dimensions Length 105.2 Length 105.2 Umax. [V] 1000 Height NS 35/7,5 53 Height NS 32 58 Max. Ø [mm²] AWG (UL) 0.
Terminal blocks USST spring-assisted screw terminal blocks Spring-assisted test disconnect and feed-through terminal blocks Notes: 1) When the switching jumper is used, Umax. is reduced to 400 V. 2) For additional test sockets, visit phoenixcontact.net/products 6 (10) mm², 57 A, test disconnect terminal block, for accommodating switching jumpers, 2 connections Technical data Dimensions Width 8.2 Width 8.2 Imax. [A] 57 IEC 60947-7-1 IEC Length 82 Length 82 Umax.
Terminal blocks MT and MBK miniature screw terminal blocks MT... miniature terminal blocks Miniature terminal blocks The miniature screw terminal blocks The MT may be tiny but they can be marked and bridged just like their larger cousins. With a pitch of 4.2 mm and a connection cross section of 1.5 mm2, they permit convenient wiring in confined spaces. 462 PHOENIX CONTACT Universal and zero-maintenance The screw connection of the MT miniature terminal blocks is characterized by three main features.
Terminal blocks MT and MBK miniature screw terminal blocks MT... miniature feed-through terminal block for NS 15 DIN rail Notes: For mini screw terminal blocks with jumpers, see page 39 Their compact design means that the the micro MT 1,5 terminals can keep pace with the growing need for ever smaller switch boxes The miniature terminal blocks have everything that makes the terminal blocks stand out: – Overall width of just 4.2 mm – Nominal cross section of 1.
Terminal blocks MT and MBK miniature screw terminal blocks Miniature feed-through terminal block with 3 and 4 connections MT..., for NS 15 DIN rail – Overall width of just 4.2 mm – Nominal cross section of 1.5 mm2 – Snap-on foot for DIN rails NS 15 – Numerous marking options – Bridging facility in terminal center. 1.5 (1.5) mm², 17.5 A, feed-through terminal block, 3 connections CCA 1.5 (1.
Terminal blocks MT and MBK miniature screw terminal blocks Miniature double-level terminal blocks MTTB 1,5 – Overall width of just 4.2 mm – Nominal cross section of 1.5 mm2 – Snap-on foot for DIN rails NS 15 and NS 35 – Numerous marking options – Bridging facility on both levels – Even if fully wired, the level offset offers unobstructed access to the lower connection level 1.5 (1.5) mm², 17.5 A, double-level terminal block Technical data Dimensions Width 4.2 Width 4.2 Imax. [A] 17.
Terminal blocks MT and MBK miniature screw terminal blocks Miniature ground terminals MT ...-PE, for NS 15 DIN rails – Same shape and pitch as the feed-through terminal blocks – The MT ...-PE fulfill all requirements of the IEC 60947-7-2 standard These are in particular: – Low contact resistances – Green-yellow housing – Corrosion-proof terminal points – Captive clamping screws. 1.5 (1.5) mm², ground terminal CCA Ex: Technical data Dimensions Max. electrical data Width 4.
Terminal blocks MT and MBK miniature screw terminal blocks 1.5 (1.5) mm², ground terminal, 3 connections 1.5 (1.5) mm², ground terminal, 4 connections CCA CCA Technical data Technical data Width 4.2 Length 28 IEC 60947-7-2 IEC Height NS 15 30 Max. Ø [mm²] 0.14 - 1.5 UL CSA 1.5 26 - 16 Solid 30-14 Stranded 0.14 - 1.5 0.14 - 0.5 0.14 - 1.5 0.14 - 0.5 AWG (UL) 30-14 IEC/ EN 60079-7 28-14 Ferrule without/with plastic sleeve 0.25 - 0.75 0.25 - 0.75 0.25 - 0.
Terminal blocks MT and MBK miniature screw terminal blocks MBK ... miniature feed-through terminal blocks Notes: For 2.5 mm² mini screw terminal blocks with jumpers, see page 39. For 4 mm² mini screw terminal blocks with jumpers, see page 51. – The MBK ... and MSLKG ... terminal blocks represent the top end of the mini terminal block range for 15 mm NS 15 DIN rails – MBK ...
Terminal blocks MT and MBK miniature screw terminal blocks 6 (10) mm², ground terminal Ex: KEMA 01ATEX2134U / IECEx KEM 07.0008U Technical data Width 8.2 Length 39 Height NS 15 36 Max. Ø [mm²] 0.5 - 10 IEC UL CSA 6 20 - 8 Solid 26-8 Stranded 0.5 - 10 0.5 - 2.5 - 0.5 - 6 0.2 - 2.5 - IEC 60947-7-2 AWG (UL) 26-8 IEC/ EN 60079-7 -/6 0.5-6 26-8 20 - 8 Ferrule without/with plastic sleeve 0.5 - 6 0.5 - 6 0.5 - 1.5 0.5 - 2.5 - 10 M4 1.5 - 1.8 PA V2 Ordering data Type Order No. Pcs.
Terminal blocks MT and MBK miniature screw terminal blocks Mini double-level terminal blocks MBKKB 2,5... – The miniature double-level terminal block is characterized by its space-saving, low height, and offset levels – Fixed bridges and test sockets can be inserted on both levels Notes: 1) For information on installation and using accessories for Ex applications, see page 602. 2.5 (4) mm², 24 A, double-level terminal block Ex: 2.
Terminal blocks MT and MBK miniature screw terminal blocks Mini double-level diode terminal blocks MBKKB 2,5...
Terminal blocks OTTA bolt connection terminal blocks Space-saving design Thanks to their compact type, OTTA bolt connection terminal blocks are ideally suited for switchgear, in which space is limited. 472 PHOENIX CONTACT Fast, convenient conductor connection The key feature of this range is the hinged cover which can be swung up and which features a captive cap nut. This guarantees quick and easy ring cable lug wiring.
Terminal blocks OTTA bolt connection terminal blocks OTTA ... feed-through terminal blocks and ground terminals – Convenient and fast conductor connection with captive cap nuts – Safe use, even in applications which are subject to the most stringent requirements regarding shock and vibration – Space-saving, compact design – Integrated screw locking 2.5 (2.5) mm², 24 A, feed-through terminal block 2.5 (2.5) mm², ground terminal Technical data Dimensions [mm] Dimensions [mm] Max.
Terminal blocks OTTA bolt connection terminal blocks OTTA ... feed-through terminal blocks and ground terminals – Convenient and fast conductor connection with captive cap nuts – Safe use, even in applications which are subject to the most stringent requirements regarding shock and vibration – Space-saving, compact design – Integrated screw locking 6 (6) mm², 41 A, feed-through terminal block Technical data Dimensions [mm] Dimensions [mm] Max.
Terminal blocks OTTA bolt connection terminal blocks 6 (6) mm², ground terminal 25 (25) mm², 101 A, feed-through terminal block Technical data Width 12 Width 12 Length 43.5 Length 43.5 Technical data Height NS 35/7,5 52 Height NS 32 57 Max. Ø [mm²] AWG (UL) 0.1 - 6 - IEC 60947-7-2 IEC UL CSA 6 26 - 10 30 - 22 - 10 IEC/ EN 60079-7 - Width 18 Width 18 Imax. [A] 101 IEC 60947-7-1 IEC Length 60 Length 60 Umax.
Terminal blocks OTTA bolt connection terminal blocks OTTA 6-T... test disconnect terminal blocks 6 (6) mm², 36 A, test disconnect terminal block Technical data Dimensions – Easy and clear testing in measuring transducer secondary circuits can be performed using the OTTA 6-T... test disconnect terminal blocks – Compact design – Switching jumpers with and without test sockets [mm] Dimensions [mm] Max.
Terminal blocks OTTA bolt connection terminal blocks 6 (6) mm², 36 A, test disconnect terminal block, with test socket screws 6 (6) mm², 41 A, test disconnect terminal block, with test socket screws, for accommodating switching jumpers Technical data Technical data Width 11 Width 11 Imax. [A] 36 IEC 60947-7-1 IEC Length 69 Length 69 Umax. [V] 800 Height NS 35/7,5 52 Height NS 32 57 Max. Ø [mm²] AWG (UL) 0.
Terminal blocks RBO and RSC bolt connection terminal blocks Bolt connection and screw terminal blocks Extensive program The RBO product range offers a suitable compact bolt connection terminal block from M5 to M16 for every conductor connection from 0.
Terminal blocks RBO and RSC bolt connection terminal blocks RBO 5...
Terminal blocks RBO and RSC bolt connection terminal blocks Test disconnect terminal block with bolt connection RBO 5-T...
Terminal blocks RBO and RSC bolt connection terminal blocks Bolt connection terminal blocks RBO 6...
Terminal blocks RBO and RSC bolt connection terminal blocks RBO bolt connection terminal blocks, open, for ring- and fork-type cable lugs Notes: For corresponding test plugs, see the following page. 1) For information on installation and using accessories for Ex applications, see page 602. 70 (70) mm², 192 A, feed-through terminal block, for DIN rail and direct mounting Ex: SEV13ATEX0132U / IECEx SEV13.
Terminal blocks RBO and RSC bolt connection terminal blocks 150 (150) mm², 309 A, feed-through terminal block, for DIN rail and direct mounting Ex: 240 (240) mm², 415 A, feed-through terminal block, for DIN rail and direct mounting Ex: 300 (300) mm², 520 A, feed-through terminal block, for DIN rail and direct mounting Ex: SEV13ATEX0132U / IECEx SEV13.0003U SEV13ATEX0132U / IECEx SEV13.0003U SEV13ATEX0132U / IECEx SEV13.0003U Width 41 Imax.
Terminal blocks RBO and RSC bolt connection terminal blocks RBO bolt connection terminal blocks with covering hoods, for ring- and fork-type cable lugs Notes: 1) For information on installation and using accessories for Ex applications, see page 602. 2) Cable lug must be insulated with shrink sleeve. 70 (70) mm², 192 A, feed-through terminal block, for DIN rail and direct mounting Ex: SEV13ATEX0132U / IECEx SEV13.
Terminal blocks RBO and RSC bolt connection terminal blocks 150 (150) mm², 309 A, feed-through terminal block, for DIN rail and direct mounting Ex: 240 (240) mm², 415 A, feed-through terminal block, for DIN rail and direct mounting Ex: 300 (300) mm², 520 A, feed-through terminal block, for DIN rail and direct mounting Ex: SEV13ATEX0132U / IECEx SEV13.0003U SEV13ATEX0132U / IECEx SEV13.0003U SEV13ATEX0132U / IECEx SEV13.0003U Width 41 Imax.
Terminal blocks RBO and RSC bolt connection terminal blocks RSC ...
Terminal blocks RBO and RSC bolt connection terminal blocks 4 (6) mm², 32 A, feed-through terminal block, for direct mounting 10 (10) mm², 57 A, feed-through terminal block Technical data 10 (10) mm², 57 A, feed-through terminal block, for direct mounting Technical data Width 9 Width 9 Width 9 Imax. [A] 32 IEC 60947-7-1 IEC Length 53.3 Length 53.3 Length 53.3 Umax. [V] 8002) Height NS 35/7,5 Height NS 32 Height 37 Max. Ø [mm²] AWG (UL) 0.
Terminal blocks RBO and RSC bolt connection terminal blocks RSC 6 ..., M6 screw terminal blocks and RSC 5-T...
Terminal blocks RBO and RSC bolt connection terminal blocks 35 (35) mm², 125 A, feed-through terminal block, for direct mounting 10 (10) mm², 50 A, test disconnect terminal block Technical data Width 17 Width 17 Width 17 Imax. [A] 125 IEC 60947-7-1 IEC Length 80.8 Length 80.8 Length 80.8 Umax. [V] 800 UL CSA 800 125 / 35 35 12 - 2 600 115 / - 600 115 12 - 2 10 (10) mm², 50 A, test disconnect terminal block Technical data Height NS 35/7,5 Height NS 32 Height 39.7 Max.
Terminal blocks RBO and RSC bolt connection terminal blocks HV ... high-current connector Dimensions – Secure connection of up to 4 conductors with cable lugs according to DIN 46234, 46235 and 46237 in very tight spaces – Spring washers are used to prevent hexagonal nuts from loosening – Extensive range of accessories for safe and comfortable wiring of conductors up to 120 mm2 – Two and three-pos.
Terminal blocks RBO and RSC bolt connection terminal blocks 35 (35) mm², 125 A, M6 bolt terminal block 50 (50) mm², 150 A, M8 bolt terminal block 120 (120) mm², 269 A, M10 bolt terminal block Technical data Technical data Width 16 Imax. [A] 125 IEC 60947-7-1 IEC Length 67 Umax. [V] 1000 Height NS 35/7,5 58 Max. Ø [mm²] AWG (UL) 2.5 - 35 - UL / CUL CSA 1000 125 / 35 35 14 - 2 - 1000 120 / -4 IEC/ EN 60079-7 - Technical data Width 21 Imax. [A] 150 IEC 60947-7-1 IEC Length 67 Umax.
Terminal blocks RBO and RSC bolt connection terminal blocks HV ... high-current connector – The bolt connection terminal blocks for cable lugs according to DIN 46234, DIN 46235, and DIN 46237 are available as part of the UHV ...
Terminal blocks RBO and RSC bolt connection terminal blocks 50 (50) mm², 150 A, M8 bolt terminal block 120 (120) mm², 269 A, M10 bolt terminal block 120 (120) mm², 269 A, M12 bolt terminal block Technical data Technical data Width 21 Imax. [A] 150 IEC 60947-7-1 IEC Length 67 Umax. [V] 1000 Height NS 35/7,5 66 Max. Ø [mm²] AWG (UL) 2.5 - 50 - UL / CUL CSA 1000 150 / 50 50 14 - 1/0 - 1000 125 / -3 IEC/ EN 60079-7 - Width 32 Imax. [A] 269 IEC 60947-7-1 IEC Length 67 Umax.
Terminal blocks RBO and RSC bolt connection terminal blocks UHV ... high-current connector – The UHV ... high-current connectors are available in several versions – Versions are available with a cable lug or direct connection and there is a mixed version of both connection types – The comprehensive range of accessories ensures safe and user-friendly wiring of conductors up to 240 mm2 Notes: In the case of UHV 240..., the BG/F flat bracket must be mounted.
Terminal blocks RBO and RSC bolt connection terminal blocks 95 (95) mm², 232 A, feed-through terminal block 150 (150) mm², 309 A, feed-through terminal block Technical data Width 40 Imax. [A] 232 IEC 60947-7-1 IEC Length 114 Umax. [V] 1000 UL / CUL CSA 1000 232 / 95 95 3 - 3/0 Solid 600 230 / 2 - 4/0 Stranded 600 200 / 2 - 4/0 25 - 95 25 - 35 35 - 95 25 - 35 240 (240) mm², 415 A, feed-through terminal block Technical data Height NS 35/15 86 Max.
Terminal blocks RBO and RSC bolt connection terminal blocks H B L Structure [mm] Current [A] 3 x 9 x 0.8 6 x 9 x 0.8 4 x 16 x 0.8 6 x 16 x 0.8 10 x 16 x 0.8 11 x 21 x 0.8 100 160 200 250 400 630 Type UHV 50-KH/AS UHV 50-KH/KH Structure [mm] Current [A] 3 x 9 x 0.8 6 x 9 x 0.8 4 x 16 x 0.8 6 x 16 x 0.8 10 x 16 x 0.8 11 x 21 x 0.8 100 160 200 250 400 630 1) Type – X X X X1) – Internal dimensions of terminal sleeves c W 26 / 1.024 26 / 1.024 26 / 1.024 32 / 1.26 32 / 1.26 32 / 1.26 40 / 1.
Terminal blocks RBO and RSC bolt connection terminal blocks DIN 46234 Cable lugs Conductor cross section [mm²]/[AWG] DIN 46235 Hole d2 [mm]/[inch] Width d3 [mm]/[inch] DIN 46237 Hole d2 [mm]/[inch] Width d3 [mm]/[inch] Hole d2 [mm]/[inch] M3 0.5 1 2.5 20 17 14 3.2 3.2 3.2 0.126 0.126 0.126 5 6 6 0.197 0.236 0.236 –/– –/– –/– –/– –/– –/– –/– 3.2 3.2 M5 0.5 1 2.5 6 10 16 25 20 17 14 10 8 6 3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 0.208 0.208 0.208 0.208 0.208 0.208 0.
Terminal blocks G and UDB device terminal blocks Device terminal blocks For direct rail-free use Compact device terminal blocks fitted free of rails are mainly used in network connections for electric and electronic equipment and in small terminal boxes. 498 PHOENIX CONTACT Safe conductor connection The device terminal blocks are designed for very stringent requirements.
Terminal blocks G and UDB device terminal blocks Device terminal blocks for direct mounting G 5/G 10 and GE 10... – Finger protection – The housing ribs engage with one another below on both sides for simple attachment – Mounting with two screws per block (apart from the 2-pos. version) Notes: For drawings and dimensions, visit phoenixcontact.
Terminal blocks G and UDB device terminal blocks Device terminal blocks for direct mounting GE 35... – Finger protection – Mounting with two screws per block – Large marking option on terminal points Notes: For drawings and dimensions, visit phoenixcontact.net/products 10 (16) mm², 76 A, terminal block base, two-pos. 10 (16) mm², 76 A, terminal block base, two-pos., internally connected Technical data Dimensions Max.
Terminal blocks G and UDB device terminal blocks 35 (35) mm², 125 A, terminal block base, single-pos. 35 (35) mm², 125 A, terminal block base, two-pos. 35 (35) mm², 125 A, terminal block base, two-pos., internally connected Technical data Technical data Width Length 19.8 83.7 Imax. [A] Umax. [V] 125 630 IEC 60947-7-1/IEC 60998 IEC UL Height 44.9 Max. Ø [mm²] 0.75 - 35 630 125 / 35 35 18 - 2 Solid Stranded - 0.75 - 35 0.75 - 10 - 0.75 - 35 0.
Terminal blocks G and UDB device terminal blocks UDB ... trunk line branch terminals 25 (25) mm², 101 A, trunk line branch terminal, 2 x 16 mm² feeders Technical data Dimensions – The branch terminals from the UDB ... series are suitable for the simple voltage pick-off of main supply cables up to 35 mm2 – The UDB ...
Terminal blocks G and UDB device terminal blocks 35 (35) mm², 125 A, trunk line branch terminal, 2 x 25 mm² feeders Technical data Width 27 Imax. [A] 125 IEC 60998-1 IEC Length 55 Umax. [V] 400 Height NS 35/7,5 46 Max. Ø [mm²] AWG (UL) 10 - 35 - UL CSA 400 125 / 35 35 8-2 Solid -/Stranded -/- 10 - 35 Solid 10 - 25 Stranded 1.5 - 25 - IEC/ EN 60079-7 Ferrule without/with plastic sleeve 10 - 25 10 - 16 Ferrule without/with plastic sleeve 1.5 - 16 1.5 - 10 25 PA V0 Ordering data Pcs. / Pkt.
Terminal blocks Accessories PSBJ ... test sockets – The test sockets are tailored to the special applications encountered in the energy supply industry – The PSBJ... test socket is used in place of the normal bridge screw and ensures the voltage tap on a bridged group of terminal blocks 4 mm test socket, for URTK/S test disconnect terminal blocks 4 mm test socket, for UK terminal blocks with M4 bridge thread Ordering data Description Color Ordering data Type Order No. Pcs. / Pkt.
Terminal blocks Accessories 4 mm test socket, for safety test plugs, for UK terminal blocks 4 mm test socket, for SRTK 6 and URTK 6 test disconnect terminal blocks, M3 thread Ordering data 4 mm test socket, for safety test plugs, for URTK/S test disconnect terminal blocks Ordering data Type Order No. Pcs. / Pkt. PSBJ 3/52/6 GY PSBJ 4/41/8 GY PSBJ 3/50/6 GY 3048085 3206186 3048098 10 10 10 PSBJ 4/51/8 GY 3206173 10 Ordering data Type Order No. Pcs. / Pkt.
Terminal blocks Accessories PSBJ ... test sockets Notes: 1) For additional test sockets, visit phoenixcontact.net/products – Test sockets are also available for the UGSK/S switchable slide-type terminal blocks for testing tasks with 4 mm Ø safety measuring cables Ordering data Description Test socket Test socket, insulated1) 506 PHOENIX CONTACT Color orange yellow green violet blue gray brown black red orange white yellow green violet blue Type Order No. Pcs. / Pkt.
Terminal blocks Accessories Ordering data Type Order No. Pcs. / Pkt. PSBJ 6-T GY PSBJ 6-T BN PSBJ 6-T BK PSBJ 6-T RD PSBJ 6-T OG PSBJ 6-T WH PSBJ 6-T YE PSBJ 6-T GN PSBJ 6-T VT PSBJ 6-T BU 3070316 3070317 3070318 3070319 3070320 3070324 3070326 3070327 3070328 3070329 10 10 10 10 10 10 10 10 10 10 For further information and full technical data, visit phoenixcontact.
Terminal blocks Accessories PSB ... test sockets Test sockets for UK terminal blocks Ordering data – PSB ... test sockets are used for a reliable test connection – All test sockets are screwed into the bridge shaft – With the PSB 3/10/4, the test connection is provided by the MPS miniature test plug with 2.
Terminal blocks Accessories PS-... modular test plug – The PS-...2,3MM modular test plugs can be used to put together individual test adapters – The test plug reliably makes contact in the bridge shaft and in all test sockets with a 2.3 mm or 4 mm diameter – The PS-UK ...
Terminal blocks Accessories KSS ... short-circuit plug 2, 3, and 4-pos. short-circuit connectors Technical data – Short-circuit plugs allow two or more neighboring terminal blocks, fitted with the PSB ... or PSBJ ... test sockets, to be easily short circuited – The KSSI ... short-circuit plugs are suitable for use on isolated 4 mm test sockets for safety test plugs 510 PHOENIX CONTACT General data Material Inflammability class according to UL 94 PA V2 Ordering data Type Order No. Pcs. / Pkt.
Terminal blocks Accessories WS ... warning labels Warning labels for UK feed-through terminal blocks Ordering data – Network connection terminal blocks are reliably covered and marked using warning labels – This prevents accidental actuation of the terminal points – The warning labels are secured in the bridge shafts of the UK ... terminal blocks using plastic screws Description Color Type Order No. Pcs. / Pkt. Warning label, with 2 plastic screws, pitch 5 mm covers 3 t.b.s covers 4 t.b.
Terminal blocks SK ... shield terminals Large shield support Shield terminals are suitable for all standard cable shields and allow for EMCcompliant wiring through large surfaces and low-impedance and low-resistance contact transitions. 512 PHOENIX CONTACT Easy to install The shield connection terminal blocks offer optimum wiring convenience. Only once the terminal strip has been wired is the shield connection terminal block mounted by simply pivoting it into place.
Terminal blocks SK ... shield terminals Conductors with a diameter of 2 to 35 mm can make optimum contact with the shield terminals of the SK series without any special tools and are available for various types of mounting. The single-sided AB-SK shield support frames are particularly well suited to spacesaving conductor connection for terminal blocks and devices with cable entry at the side.
Terminal blocks SK ... shield terminals SK ...
Terminal blocks SK ... shield terminals SKS ... shield terminals – The SKS ... spring shield terminals are available for cable and conductor diameters of between 3 and 20 mm – Three different forms of mounting are possible: on NS 35 DIN rails, on busbars or directly on conductive mounting plates Notes: For dimensional drawings, see page 523 Shield terminals for busbar and direct mounting Shield terminals for DIN rail mounting Ordering data Ordering data Type Order No. Pcs. / Pkt.
Terminal blocks SK ... shield terminals Support bracket for shield support on one side Support bracket frame, tall, for SK and SKS shield terminals Technical data Dimensions AB-SK TOP – For convenient shield connection, especially for single- and multi-level terminal blocks and devices with a front connection – The 3 x 10 mm rail can be mounted in the support frames vertically, horizontally, and at a 45° angle for optimum conductor placing – Compact design in a 5.
Terminal blocks SK ... shield terminals Support bracket, 65 mm long, for SK ... shield terminals Technical data Technical data Height NS 35/7,5 28.7 Width 6.2 PA Length 95.5 Technical data Height NS 35/7,5 28.7 Width 9.5 PA Ordering data Type Order No. Pcs. / Pkt. AB-SK 3025341 10 Order No. Pcs. / Pkt.
Terminal blocks SK ... shield terminals Double support bracket for shield support on both sides Double support bracket, tall, for SK and SKS shield terminals Technical data Dimensions Height NS 35/7,5 - PA Ordering data Description Color Type Order No. Pcs. / Pkt. AB-SK-D TOP 3062100 10 0402174 10 Double support bracket with end bracket function, for mounting on NS 35..., direct contact with NS 35...
Terminal blocks SK ... shield terminals Isolated, double support bracket, tall, for SK and SKS shield terminals Double support bracket, tall, for SK ... shield terminals Technical data Width 5.2 Length 155.8 Technical data Height NS 35/7,5 - Width 8.2 PA Length 150 Technical data Height NS 35/7,5 28.7 Width 8.2 PA Length 150 Ordering data Type Order No. Pcs. / Pkt. AB-SK-D TOP INSULATED 3062087 10 Ordering data Type Order No. Pcs. / Pkt.
Terminal blocks SK ... shield terminals Support bracket frame for direct mounting The support frames are available in the following versions: – AB/SS for isolated installation on the mounting plate and – AB/SS-M for non-isolated installation on the mounting plate – For mounting SK and SKS shield terminals Notes: For dimensional drawings, see phoenixcontact.net/products General data Material Support bracket for SK ... shield terminals Support bracket for SK ...
Terminal blocks SK ... shield terminals Multi-level support bracket for direct mounting Support bracket, multi-level, insulated Technical data – Double and triple support frames for different busbars – Type allows for an extremely compact design using large amounts of wiring, e. g. for multi-level front connection terminal blocks – Support frames are isolated – Direct mounting General data Material PA Ordering data Description Type Order No. Pcs. / Pkt.
Terminal blocks SK ...
Terminal blocks SK ... shield terminals Dimensions in mm a SKS shield terminals Drilling and punching patterns for SK...-D b c d e Dimensions in mm a b c d e f 46.8 9 6 SKS 8 – 18 26 12.4 – – – SK 5 6.5 19.5 SK 8 6.5 19.5 48.7 12 9 SKS 14 – 21 32 19 – 6.5 19.5 59.3 17 14 SKS 20 – 27 40.5 24.7 – – SK 20 6.5 19.5 75 24 21 SKS 8-D – 18 26 12.4 – – SK 28 6.5 20 93 32 28 SKS 14-D – 21 32 19 – – SK 35 6.5 20 106.
PHOENIX CONTACT
Sector-specific solutions With CLIPLINE complete, the right terminal block system is available for every industry. The various connection technologies cover the requirements of all applications and uses. Numerous international approvals and comprehensive standard tests ensure safe usage in all branches of industry. Special requirements, such as those affecting the rail industry, shipbuilding or explosion-protected areas in process technology and process engineering, are also taken into account.
Sector-specific solutions Solutions for energy technology Phoenix Contact has provided the power supply sector with test disconnect terminal blocks for all current transformer and voltage transducer applications for many decades. In addition to the standard terminal blocks, the test disconnect terminal blocks are an integral part of the Phoenix Contact product portfolio.
Sector-specific solutions Solutions for energy technology The triple function shaft on both sides of the longitudinal disconnect point enables the manual placement of bridging, testing, and switching accessories. Non-adjacent jumpers also allow the star point to be formed conveniently within the terminal strip, without the need for additional wire jumpers. The lengthwise disconnector reliably makes contact and latches with a swiveling movement in the respective switching state.
Sector-specific solutions Solutions for energy technology FAME is the innovative plug-in test system for all measuring and testing tasks in network protection technology for medium- and highvoltage switchgear. With the modular system, you can now perform manual testing operations automatically, safely, and more quickly. Suitable for every application, the modular system can be directly integrated into the control cabinet panel or used as a DIN rail version.
Sector-specific solutions Solutions for energy technology Preprogrammed short-circuit and switching operations depend on consistent insertion and removal of the test plug. Undefined contact states are effectively avoided thanks to the twist grip mechanism. The patented wall fastening is easy to use and has a robust design. Even tolerances in the panel cutout of up to 4 mm are compensated.
Sector-specific solutions Solutions for energy technology FAME 2 Modular plug-in test system without operating plug The new, modular FAME 2 measuring transducer test system enables all transformer testing tasks to be carried out quickly and safely. The transformer short circuits automatically when the test plug is inserted. The time-controlled signal sequence when pulling out the plug is prompted by the patented twist grip mechanism.
Sector-specific solutions Solutions for energy technology Mains protection – circuit example with star point grounding in the test terminal strip 1 2 1 2 3 4 5 6 7 8 9 * 9 # L1 L2 L3 1b 2b 3b 4b 5b 6b 7b 8b 9b 10b 11b 12b 13b 14b 15b 1a 2a 3a 4a 5a 6a 7a 8a 9a 10a 11a 12a 13a 14a 15a L3 L2 L1 Test terminal strip for DIN rail mounting with current transformer, voltage transducer, and signals Test plug with current transformer, voltage transducer, and signals Test terminal strip, bl
Sector-specific solutions Solutions for energy technology Test terminal strip, with push-in connection or screw connection Notes: To create panel cutouts, see phoenixcontact.net/products. For further jumpers, see page 538. 1) Derating curve available on request. 2) Rated surge voltage: 4 kV. 6 (10) mm², 30 A, 4 ... 25-pos. test terminal strip, for wall mounting, push-in connection Technical data Imax.
Sector-specific solutions Solutions for energy technology 6 (10) mm², 30 A, 4 ... 25-pos. test terminal strip, for DIN rail mounting, push-in connection 6 (10) mm², 30 A, 4 ... 25-pos. test terminal strip, for wall mounting, screw connection Technical data Imax. [A] 30 IEC 60947-7-1 IEC Umax. [V] 4002) UL CSA 4002) 241) / 6 6 20 - 8 Solid 300 10 20 - 8 Stranded - 0.5 - 10 1 - 10 0.5 - 6 - Technical data Max. Ø [mm²] 0.
Sector-specific solutions Solutions for energy technology FTPR ... and FTP ... test plug, multiposition, freely configurable contact tabs – The test plugs can be easily configured and ordered with just a click of the mouse in the product area on our website at phoenixcontact.net/products. – To order via fax or e-mail, please use the ordering data as shown in the ordering example on the following page 24 A, test plug with twist grip, 4 mm test sockets Notes: 1) Rated surge voltage: 4 kV.
Sector-specific solutions Solutions for energy technology Ordering example: configurable test plug with twist grip function To ensure that your order is correct, you need a defined view of how everything is counted. This is achieved when the status window in the top view is located on the left-hand side. Position 1 is then on the left. Each position of a test plug is described by a contact tab feature that is selected. The following features are possible: S M L LGN N Ordering example: A 15-pos.
Sector-specific solutions Solutions for energy technology Service test plug, FBP-2/... blind plugs – The service test plug has a 1-pos. and 4-pos. design without side flanges – Free positioning on the test terminal strip for special measuring tasks – Additional assembly with bridges and test sockets – During normal operation, the blind plug acts as a protective cover for the test terminal strip and can be sealed as an option Service test plug Blind plug 4 ... 25-pos.
Sector-specific solutions Solutions for energy technology PC...-TRI coding profile set Technical data General data Material Inflammability class according to UL 94 PA V0 Ordering data – The coding profile set can be used to assign test terminal strips and test plugs according to the specific application – Maximum safety is therefore ensured for all testing tasks Description Color Type Order No. Pcs. / Pkt.
Sector-specific solutions Solutions for energy technology Jumper, red, 8.2 mm pitch, FBS ... Ordering data – The FBS ...-8 jumpers are used for shortcircuiting, as star-point jumpers, and also to establish grounding in connection with a PE terminal block on the terminal strip Description Type Order No. Pcs. / Pkt. Jumper 2-pos. 3-pos. 4-pos. 5-pos. 6-pos. 10-pos.
Sector-specific solutions Solutions for energy technology Pre-assembled bridge, red, 8.2 mm pitch When using bridges in conjunction with the FAME plug-in test system, the maximum permissible bridge current is 24 A.
Sector-specific solutions Solutions for energy technology Test terminal strip, with push-in connection, wall or DIN rail mounting The VDE B7 version is suitable as a plugin test system in digital differential protection as an addition to the F19 plug-in test system, see page 546. The VDE A7 version is suitable as a plugin test system in single-system current, voltage, and power relays, wattmetric and ground fault wiper relays, detuning level controllers or reverse power protection for generators.
Sector-specific solutions Solutions for energy technology 6 (10) mm², 30 A, test terminal strip, VDE coded type B7 6 (10) mm², 30 A, test terminal strip, VDE coded type E7 24 A, test plug, bridge assignment according to circuit diagram, VDE coded Technical data Imax. [A] 30 IEC 60947-7-1 IEC Umax. [V] 4002) UL CSA 4002) 241) / 6 6 20 - 8 Solid 300 10 20 - 8 Stranded - 0.5 - 10 1 - 10 0.5 - 6 - Technical data Max. Ø [mm²] 0.
Sector-specific solutions Solutions for energy technology Test terminal strip, with push-in connection, wall or DIN rail mounting The VDE A14 version is suitable as a plug-in test system for three-stage automatic frequency discharge, as zeropower comparison protection, and as stator and rotor ground fault protection. The VDE B14 version is suitable as a plug-in test system in overcurrent directional protection, distance protection for high and medium voltage, as well as voltage regulation.
Sector-specific solutions Solutions for energy technology 6 (10) mm², 30 A, test terminal strip, VDE coded type B14 6 (10) mm², 30 A, test terminal strip, VDE coded type C14 24 A, test plug, bridge assignment according to circuit diagram, VDE coded Technical data Imax. [A] 30 IEC 60947-7-1 IEC Umax. [V] 4002) UL CSA 4002) 241) / 6 6 20 - 8 Solid 300 10 20 - 8 Stranded - 0.5 - 10 1 - 10 0.5 - 6 - Technical data Max. Ø [mm²] 0.
Sector-specific solutions Solutions for energy technology Test terminal strip, with push-in connection, wall or DIN rail mounting The VDE B19 version is suitable as a plug-in test system in distance protection for high voltage. The VDE C19 version is suitable as a plug-in test system in distance protection as system busbar protection, overcurrent directional protection, and current comparison protection for cables.
Sector-specific solutions Solutions for energy technology 6 (10) mm², 30 A, test terminal strip, VDE coded type C19 6 (10) mm², 30 A, test terminal strip, VDE coded type D19 24 A, test plug, bridge assignment according to circuit diagram, VDE coded Technical data Imax. [A] 30 IEC 60947-7-1 IEC Umax. [V] 4002) UL CSA 4002) 241) / 6 6 20 - 8 Solid 300 10 20 - 8 Stranded - 0.5 - 10 1 - 10 0.5 - 6 - Technical data Max. Ø [mm²] 0.
Sector-specific solutions Solutions for energy technology Test terminal strip, with push-in connection, wall or DIN rail mounting The VDE F19 version is suitable as a plug-in test system in electromechanical differential protection for transformers, generators, motors, and cables. The VDE G19 version is suitable as a plug-in test system in digital differential protection for transformers.
Sector-specific solutions Solutions for energy technology 6 (10) mm², 30 A, test terminal strip, VDE coded type G19 6 (10) mm², 30 A, test terminal strip, VDE coded type H19 24 A, test plug, bridge assignment according to circuit diagram, VDE coded Technical data Imax. [A] 30 IEC 60947-7-1 IEC Umax. [V] 4002) UL CSA 4002) 241) / 6 6 20 - 8 Solid 300 10 20 - 8 Stranded - 0.5 - 10 1 - 10 0.5 - 6 - Technical data Max. Ø [mm²] 0.
Sector-specific solutions Solutions for energy technology Test terminal strip, with push-in connection, wall or DIN rail mounting The VDE I19 version is suitable as a plug-in test system in medium-voltage, outlet, and coupling protection, including selective ground fault detection. – The test plugs are assembled with jumpers and contact tab lengths according to the circuit diagram – A transparent covering hood protects the jumpers.
Sector-specific solutions Solutions for energy technology 24 A, test plug, bridge assignment according to circuit diagram, VDE coded type I19 Blind plug, VDE coded type I19 Technical data Imax. [A] 24 Umax. [V] 4002) Technical data Max. Ø [mm²] 0.5 - 2.5 AWG (UL) - Max. Ø [mm²] - IEC UL CSA IEC UL CSA 4002) 24 / 2.5 6 20 - 14 Solid 300 10 Stranded - IEC/ EN 60079-7 Ferrule without/with plastic sleeve - Solid Stranded - - 0.5 - 2.5 - - - 0.5 - 0.
Sector-specific solutions Solutions for energy technology Test terminal strip, with screw connection, wall or DIN rail mounting The VDE B7 version is suitable as a plugin test system in digital differential protection as an addition to the F19 plug-in test system, see page 546. The VDE A7 version is suitable as a plugin test system in single-system current, voltage, and power relays, wattmetric and ground fault wiper relays, detuning level controllers or reverse power protection for generators.
Sector-specific solutions Solutions for energy technology 6 (10) mm², 30 A, test terminal strip, VDE coded type B7 6 (10) mm², 30 A, test terminal strip, VDE coded type E7 24 A, test plug, bridge assignment according to circuit diagram, VDE coded Technical data Imax. [A] 30 IEC 60947-7-1 IEC Umax. [V] 4002) UL CSA 4002) 241) / 6 6 24 - 8 Solid 300 10 24 - 8 Stranded - 0.2 - 10 0.2 - 2.5 - 0.2 - 10 0.2 - 2.5 - Technical data Max. Ø [mm²] 0.
Sector-specific solutions Solutions for energy technology Test terminal strip, with screw connection The VDE A14 version is suitable as a plug-in test system for three-stage automatic frequency discharge, as zeropower comparison protection, and as stator and rotor ground fault protection. The VDE B14 version is suitable as a plug-in test system in overcurrent directional protection, distance protection for high and medium voltage, as well as voltage regulation.
Sector-specific solutions Solutions for energy technology 6 (10) mm², 30 A, test terminal strip, VDE coded type B14 6 (10) mm², 30 A, test terminal strip, VDE coded type C14 24 A, test plug, bridge assignment according to circuit diagram, VDE coded Technical data Imax. [A] 30 IEC 60947-7-1 IEC Umax. [V] 4002) UL CSA 4002) 241) / 6 6 24 - 8 Solid 300 10 24 - 8 Stranded - 0.2 - 10 0.2 - 2.5 - 0.2 - 10 0.2 - 2.5 - Technical data Max. Ø [mm²] 0.
Sector-specific solutions Solutions for energy technology Test terminal strip, with screw connection The VDE B19 version is suitable as a plug-in test system in distance protection for high voltage. The VDE C19 version is suitable as a plug-in test system in distance protection as system busbar protection, overcurrent directional protection, and current comparison protection for cables. The VDE D19 version is suitable as a plug-in test system for electromechanical differential protection for transformers.
Sector-specific solutions Solutions for energy technology 6 (10) mm², 30 A, test terminal strip, VDE coded type C19 6 (10) mm², 30 A, test terminal strip, VDE coded type D19 24 A, test plug, bridge assignment according to circuit diagram, VDE coded Technical data Imax. [A] 30 IEC 60947-7-1 IEC Umax. [V] 4002) UL CSA 4002) 241) / 6 6 24 - 8 Solid 300 10 24 - 8 Stranded - 0.2 - 10 0.2 - 2.5 - 0.2 - 10 0.2 - 2.5 - Technical data Max. Ø [mm²] 0.
Sector-specific solutions Solutions for energy technology Test terminal strip, with screw connection The VDE F19 version is suitable as a plug-in test system in electromechanical differential protection for transformers, generators, motors, and cables. The VDE G19 version is suitable as a plug-in test system in digital differential protection for transformers. The VDE H19 version is suitable as a plug-in test system in overcurrent directional protection and distance protection as system protection.
Sector-specific solutions Solutions for energy technology 6 (10) mm², 30 A, test terminal strip, VDE coded type G19 6 (10) mm², 30 A, test terminal strip, VDE coded type H19 24 A, test plug, bridge assignment according to circuit diagram, VDE coded Technical data Imax. [A] 30 IEC 60947-7-1 IEC Umax. [V] 4002) UL CSA 4002) 241) / 6 6 24 - 8 Solid 300 10 24 - 8 Stranded - 0.2 - 10 0.2 - 2.5 - 0.2 - 10 0.2 - 2.5 - Technical data Max. Ø [mm²] 0.
Sector-specific solutions Solutions for energy technology Test terminal strip, with screw connection The VDE I19 version is suitable as a plug-in test system in medium-voltage, outlet, and coupling protection, including selective ground fault detection. – The test plugs are assembled with jumpers and contact tab lengths according to the circuit diagram – A transparent covering hood protects the jumpers. The covering hood can only be removed by dismantling the test plug – All VDE-specified 7, 14, and 19-pos.
Sector-specific solutions Solutions for energy technology 24 A, test plug, bridge assignment according to circuit diagram, VDE coded type I19 Blind plug, VDE coded type I19 Technical data Imax. [A] 24 Umax. [V] 4002) Technical data Max. Ø [mm²] 0.5 - 2.5 AWG (UL) - Max. Ø [mm²] - IEC UL CSA IEC UL CSA 4002) 24 / 2.5 6 20 - 14 Solid 300 10 Stranded - IEC/ EN 60079-7 Ferrule without/with plastic sleeve - Solid Stranded - - 0.5 - 2.5 - - - 0.5 - 0.
Sector-specific solutions Solutions for energy technology Switchable terminal blocks in a wide range of designs for power generation and distribution have been part of the terminal block product range for decades. These terminal blocks are specifically tailored to the test circuits in current transformer and voltage transducer secondary circuits. Manual switching operations short circuit current transformers prior to measurements being taken.
Sector-specific solutions Solutions for energy technology The compact and modular design of the system, as well as the plugs and test blocks, provides the right number of positions for every application. The patented wall fastening is easy to use and has a robust design. Large tolerances in the plate cutout of up to 4 mm are compensated for by the eccentric tappet function. Thanks to the optional use of jumpers, all test circuits can be implemented in the plug.
Sector-specific solutions Solutions for energy technology FAME 1 Modular plug-in test system with operating plug The new, modular FAME 1 measuring transducer test system enables all transformer testing tasks to be carried out quickly and safely. The transformer short circuit generated automatically when pulling out the operating plug and the shock-proof design ensure the highest degree of safety during measurement.
Sector-specific solutions Solutions for energy technology Mains protection – switching example with sequential switching sequence 1 1 4 7 * L1 L2 L3 2 5 8 9 2 3 6 9 # 1 3 5 7 9 11 13 15 17 1 3 5 7 9 1 3 5 7 2 4 6 8 10 12 14 16 18 2 4 6 8 10 2 4 6 8 10 9 L1 L2 L3 N Test terminal strip for voltage transformers Test terminal strip for current transformers Test terminal strip for signal and tripping contacts Test terminal strips, operating plugs, test plugs Order No.
Sector-specific solutions Solutions for energy technology Measuring transducer block, with connector Notes: For further test adapters, test sockets, and connectors for use with screw test sockets, visit phoenixcontact.net/products. Derating curve on request. To create panel cutouts, see phoenixcontact.net/products. 1) Rated surge voltage: 4 kV. 2) FAME 6/...BI test blocks are available for standard panel cutouts. 6 (10) mm², 30 A, test terminal strip, wall mounting Technical data Imax.
Sector-specific solutions Solutions for energy technology 30 A, operating plug 24 A, test plug, incl. two test sockets per position Blind plug Technical data Technical data Imax. [A] 30 Umax. [V] 4001) Max. Ø [mm²] - AWG (UL) - IEC/ EN 60079-7 Ferrule without/with plastic sleeve - Technical data Imax. [A] 24 Umax. [V] 4001) Max. Ø [mm²] 0.5 - 2.5 AWG (UL) - Max. Ø [mm²] - IEC UL CSA IEC UL CSA IEC UL CSA 4001) 24 / 6 6 Solid 300 10 Stranded - 4001) 24 / 2.
Sector-specific solutions Solutions for energy technology DIN rail adapter Ordering data Description Color DIN rail adapter gray Type Order No. Pcs. / Pkt. E-UTWE 6 3069055 10 Type Order No. Pcs. / Pkt. APH-UTWE 6 3069056 10 The pre-assembled test terminal strips can be mounted in a space-saving way in the control cabinet by simply snapping the E-UTWE 6 adapter onto standard NS 35 DIN rails.
Sector-specific solutions Solutions for energy technology Cable binders for securing test cables – WT-D HF 7,5x200 removable cable binders can be used to easily secure test cables to an FTP FAME 1 test plug – The cable binder base is simply unscrewed at the grip. The knurled screw is removed and then secured together with the base.
Sector-specific solutions Solutions for energy technology Compact design Thanks to their compact design and the direction of the conductor connection, the rotary switches are ideally suited for switchgear, in which space is limited. 568 PHOENIX CONTACT Universal and zero-maintenance The main features of the 2.
Sector-specific solutions Solutions for energy technology Voltmeter changeover switch with 0 position Notes: For corresponding marker carriers, refer to Catalog 5. 1) For electrical values according to IEC 60947-3, see page 581. 2.5 (2.5) mm², 20 A, voltmeter switch with 0 setting 1 3 5 7 L2-L3 L3-L1 L1-L2 0 The range of compact rotary switches up to 20 A is designed for use in energy technology applications with the available switching programs.
Sector-specific solutions Solutions for energy technology Voltmeter changeover switch, ammeter changeover switch, control switch Notes: For corresponding marker carriers, refer to Catalog 5. 1) For electrical values according to IEC 60947-3, see page 581. 2.5 (2.5) mm², 20 A, voltmeter switch with 0 setting 2.5 (2.
Sector-specific solutions Solutions for energy technology 2.5 (2.5) mm², 20 A, ammeter switch 2.5 (2.5) mm², 20 A, ammeter switch 2.5 (2.
Sector-specific solutions Solutions for energy technology Control switch, off switch Notes: For corresponding marker carriers, refer to Catalog 5. 1) For electrical values according to IEC 60947-3, see page 581. 2.5 (2.5) mm², 20 A, control switch 2.5 (2.5) mm², 20 A, off switch 1 3 5 7 0 1 2 START START 1 0 1 S0177 S0200 2 4 6 8 2 0 START 1 L1 N 6 1 10 2 START 1 5 7 0 3 START 2 6 2 START 6 8 4 Technical data Technical data Width 48 Imax. [A] 20 Length 72 Umax.
Sector-specific solutions Solutions for energy technology 2.5 (2.5) mm², 20 A, off switch 2.5 (2.5) mm², 20 A, off switch 2.5 (2.5) mm², 20 A, off switch 1 3 0 1 3 5 0 1 S0201 1 S0202 2 4 1 3 5 7 0 1 S0203 2 4 6 2 4 6 8 0 0 0 1 1 1 Technical data Technical data Technical data Width 48 Imax. [A] 20 Length 62.5 Umax. [V] 690 Installation depth 33.5 Max. Ø [mm²] AWG 0.5 - 2.5 18 - 14 Width 48 Imax. [A] 20 Length 72 Umax. [V] 690 Installation depth 43 Max.
Sector-specific solutions Solutions for energy technology Changeover switch with 0 position Notes: For corresponding marker carriers, refer to Catalog 5. 1) For electrical values according to IEC 60947-3, see page 581. 2.5 (2.5) mm², 20 A, switch with 0 setting 2.5 (2.5) mm², 20 A, switch with 0 setting 1 3 0 1 0 1 2 S0210 1 3 5 7 2 S0211 2 4 2 4 6 8 1 0 2 1 0 2 Technical data Technical data Width 48 Imax. [A] 20 Length 62.5 Umax. [V] 690 Installation depth 33.5 Max.
Sector-specific solutions Solutions for energy technology 2.5 (2.5) mm², 20 A, switch with 0 setting 2.5 (2.5) mm², 20 A, switch with 0 setting 2.5 (2.5) mm², 20 A, switch with 0 setting 1 3 5 7 9 11 0 1 S0212 1 3 5 7 9 11 13 15 0 1 2 S0213 2 4 6 8 10 12 1 3 1 0 2 2 S0214 2 4 6 8 10 12 14 16 1 0 2 2 4 1 0 2 Technical data 1 0 2 Technical data Technical data Width 48 Imax. [A] 20 Length 82.5 Umax. [V] 690 Installation depth 52.5 Max. Ø [mm²] AWG 0.5 - 2.
Sector-specific solutions Solutions for energy technology Changeover switch with and without 0 position Notes: For corresponding marker carriers, refer to Catalog 5. 1) For electrical values according to IEC 60947-3, see page 581. 2.5 (2.5) mm², 20 A, switch with 0 setting 2.5 (2.5) mm², 20 A, switch without 0 setting 1 3 5 7 1 0 2 1 3 1 S0215 2 S0220 2 4 6 8 2 4 1 1 0 2 2 Technical data Technical data Width 48 Imax. [A] 20 Length 72 Umax. [V] 6901) Installation depth 43 Max.
Sector-specific solutions Solutions for energy technology 2.5 (2.5) mm², 20 A, switch without 0 setting 2.5 (2.5) mm², 20 A, switch without 0 setting 1 3 5 7 1 2.5 (2.5) mm², 20 A, switch without 0 setting, with electrically isolated contacts 1 3 1 2 1 3 1 2 2 S0221 S0530 2 4 6 8 S0575 2 4 1 2 4 1 1 2 2 2 Technical data Technical data Technical data Width 48 Imax. [A] 20 Length 72 Umax. [V] 6901) Installation depth 43 Max. Ø [mm²] AWG 0.5 - 2.
Sector-specific solutions Solutions for energy technology Changeover switch, step switch Notes: For corresponding marker carriers, refer to Catalog 5. 1) For electrical values according to IEC 60947-3, see page 581. 2.5 (2.5) mm², 20 A, switch without 0 setting, with electrically isolated contacts 2.5 (2.5) mm², 20 A, switch without 0 setting, with electrically isolated contacts 1 3 5 7 1 1 3 1 2 S0576 2 S0720 2 4 6 8 2 4 1 1 2 2 Technical data Technical data Width 48 Imax.
Sector-specific solutions Solutions for energy technology 2.5 (2.5) mm², 20 A, stage switch with 0 setting 2.5 (2.5) mm², 20 A, stage switch with 0 setting 1 3 5 2 1 1 3 5 7 9 11 1 3 1 3 2 2 0 0 S0241 0 1 1 2 4 6 8 10 12 1 11 7 3 5 2 3 2 2 S0250 2 4 0 1 3 3 1 S0240 2 4 6 5 1 2.5 (2.5) mm², 20 A, stage switch without 0 setting 2 1 2 3 9 6 2 3 Technical data Technical data Technical data Width 48 Imax. [A] 20 Length 62.5 Umax.
Sector-specific solutions Solutions for energy technology Step switch without 0 position Notes: For corresponding marker carriers, refer to Catalog 5. 1) For electrical values according to IEC 60947-3, see page 581. 2.5 (2.5) mm², 20 A, stage switch without 0 setting 1 3 5 7 9 11 13 15 2 3 4 1 S0251 2 4 6 8 10 12 14 16 1 5 1 13 7 2 3 9 2 15 3 11 10 4 Technical data Width 48 Imax. [A] 20 Length 91 Umax. [V] 690 Installation depth 62 Max. Ø [mm²] AWG 0.5 - 2.
Sector-specific solutions Solutions for energy technology Electrical values according to IEC 60947-3, VDE 0660 Part 107 Rated data Rated continuous current Iu/Ith Rated insulation voltage Ui 1) Rated impulse withstand voltage Uimp.
Sector-specific solutions Solutions for process technology The PT 1,5/S series enables the spacesaving and time-saving wiring of signals. With a terminal width of just 3.5 mm, solutions that can be disconnected and plugged in are available in addition to the wide range of feed-through terminal blocks. 582 PHOENIX CONTACT With double-level knife disconnect terminal blocks, you can fit up to 572 signals in one meter.
Sector-specific solutions Solutions for process technology In addition to being used in applications with increased safety (Ex e), Phoenix Contact terminal blocks can also be used in intrinsically safe circuits. Blue versions are available for identification. Intrinsically safe and non-intrinsically safe circuits can be separated using corresponding partition plates.
Sector-specific solutions Solutions for photovoltaics In the mix of renewable energies consisting of wind power, hydropower, biomass, and geothermal energy, solar power in Germany, for example, has taken the leading position. Throughout the world, solar energy generation offers the greatest potential and has enjoyed the most widespread acceptance.
Sector-specific solutions Solutions for photovoltaics The STME 6-DIO HV and PTME 6-DIO HV diode terminal blocks serve as line diodes and are used in thin-film photovoltaic systems to prevent reverse currents. This means that the often sensitive thin-film modules are ideally protected to provide long-term stability. Cables with larger cross sections are used for the connection between GCBs and inverters due to their higher currents and longer cable lengths. UKH ... and RBO ...
Sector-specific solutions Solutions for building installation Electrical installations in communal facilities such as schools, hospitals, assembly points, restaurants, and all public buildings must fulfil special normative requirements. Insulation resistances must be measured during startup or when servicing the system according to DIN VDE 0108-100 (EN 50172) without directly disconnecting the neutral conductor.
Sector-specific solutions Solutions for building installation The screwless disconnect slide makes contact when it is simply slid onto the neutral busbar using a standard screwdriver. The switch position of the disconnect slide is clearly signaled. PTI installation terminal blocks with push-in connection can be wired without tools. Strip the conductors, plug them in, and you're done. This represents a clear advantage in terms of the time it takes to perform wiring.
PHOENIX CONTACT
Services - terminal strips, CLIPSAFE terminal boxes, planning and marking software Our services In addition to future-oriented products, Phoenix Contact offers a comprehensive range of services tailored to your needs. This covers ready-made terminal strips, control boxes, as well as printed marking materials.
Services - terminal strips, CLIPSAFE terminal boxes, planning and marking software Services - terminal strips The perfect solution for every application. We integrate your selected components or pre-assembled terminal strips into the right industrial housing, regardless of whether they are made from stainless steel, sheet steel, aluminum, polyester or polycarbonate. Just install the control boxes and you're done. We also offer consultation and a range of services for this.
Services - terminal strips, CLIPSAFE terminal boxes, planning and marking software Services - terminal strips We work together with you to develop a tailor-made solution - perfectly matched to your application and needs. Make the most of our international sales network and local market proximity. The Phoenix Contact product portfolio not only offers the right components for your control cabinet, but is also a solid foundation for creating complete housing solutions for your system installation.
Services - terminal strips, CLIPSAFE terminal boxes, planning and marking software CLIPSAFE stainless steel Ex terminal boxes and empty housings Empty Ex housing Choose the right stainless steel housing for your application from 140 Ex-approved versions. Custom dimensions and surface treatments are available on request.
Services - terminal strips, CLIPSAFE terminal boxes, planning and marking software CLIPSAFE stainless steel Ex terminal boxes and empty housings Comprehensive product range The housings are available as door or cover versions in nine different depths and sizes up to 1000 mm x 1000 mm x 300 mm. The robust housings made from up to 2 mm thick high-grade 1.4404 (V4A), AISI 316L stainless steel are ideal for use under extreme conditions.
Services - terminal strips, CLIPSAFE terminal boxes, planning and marking software Planning and marking software Planning module During selection, all Phoenix Contact products which can be fitted on DIN rails are displayed as a preview for rapid product selection. 594 PHOENIX CONTACT The automatic correction function checks the configured terminal strip and automatically adds any missing accessories. 2D and 3D design data are available at hhe click of a mouse.
Services - terminal strips, CLIPSAFE terminal boxes, planning and marking software Planning and marking software By integrating CLIP PROJECT into EPLAN P8, terminal strips are automatically produced from the circuit diagram in CLIP PROJECT. The product data is written back to the EPLAN parts lists using the twoway interface. Phoenix Contact provides a terminal strip service. The terminal strips configured to suit your requirements can be ordered using the e-mail function.
Services - terminal strips, CLIPSAFE terminal boxes, planning and marking software Planning and marking software CLIP PROJECT advanced The CLIP PROJECT advanced program enables the quick planning and configuration of terminal strips for the control cabinet and field as well as custom-marking of terminal blocks, cables and lines, and devices and systems: – Planning of terminal strips with components of the CLIPLINE, INTERFACE, TRABTECH, and AUTOMATION product ranges – The automatic correction function perfo
Services - terminal strips, CLIPSAFE terminal boxes, planning and marking software Planning and marking software CLIP PROJECT professional The CLIP PROJECT planning and marking software is available in both an ADVANCED and PROFESSIONAL version: – The PROFESSIONAL version also includes an efficient template designer, which can be used to design custom labels and adapt existing material descriptions – Graphics, various barcode types, and geometric elements such as squares, circles, and lines can be accessed
Technical information General information, terminal block standards, and regulations Quality in quantity Integrated management system The aim of the Phoenix Contact integrated management system is to coordinate all the requirements regarding products, processes, and organization. Statutory and regulatory requirements, as well as those of international standards and our customers, are met and, in some cases, even exceeded in all phases of the product lifecycle.
Technical information Certification bodies Certification bodies and safety marks Certification bodies and approvals Country code j IECEE CB Scheme (in combination with certifying body) International CCA CENELEC Certification Agreement (CCA inspection report) (in combination with certifying body) EU Canadian Standards Association (CSA) CA Canadian Standards Association (CSA) - CSA approval for the USA - US Canadian Standards Association.
Technical information Terminal block standards and regulations Competence in connection technology CLIPLINE complete Thanks to the implementation of appropriate design measures and the use of high-grade materials, the terminal blocks from Phoenix Contact exceed the requirements imposed by standards.
Technical information Terminal block standards and regulations Standard Process For further information and full technical data, visit phoenixcontact.
Technical information ATEX and IECEx Terminal blocks for potentially explosive areas Phoenix Contact offers an extensive range of Ex-approved connection technology for process engineering. As a result of the high-quality contact and insulation materials, these terminal blocks are particularly suitable for rough, potentially explosive industrial applications. The terminal blocks from Phoenix Contact which have been approved for the potentially explosive area are mainly standard terminal blocks.
Technical information Worldwide explosion protection Worldwide explosion protection IEC 60079 Explosion protection around the world is mainly based on the IEC 60079 series of international standards and European and American standards and directives. In North America, the basis for this is the National Electric Code (NEC) in the USA and the Canadian Electrical Code (CEC) in Canada.
Technical information Connection capacity Connection capacity IEC 60947-7-1/-2 ≥2 5 Dimensions in mm b Design A Dimensions in mm ≥2 5 Rated cross section means: Value of the maximum possible cross section of all connectable conductors (stranded and single or multi-strand) that certain thermal, mechanical, and electrical requirements refer to. During the test, the terminal blocks are connected with the rated cross section and the rated connecting capacity.
Technical information Connection of aluminum conductors Connecting aluminum conductors The screw terminal blocks in the UT ... and UKH ... series are suitable for the direct connection of aluminum conductors according to the directives governing conductor pretreatment. The aluminum “yields”, i.e., under pressure, aluminum yields more strongly than copper due to a low modulus of elasticity.
Technical information Quality tests Mechanical strength IEC 60947-7-1/-2 The mechanical stability of the terminal point is checked in a practical test. For this purpose, the terminal points of the terminal blocks must be repeatedly connected without loss of quality. Solid conductors with the rated cross section are therefore used to connect and disconnect the terminal block five times over with the torque specified in the manufacturer's information.
Technical information Quality tests Conductor pull-out test IEC 60947-7-1/-2 In practice, tensile forces can affect the terminal point during wiring or operation. Therefore, terminal blocks must be wired correctly to offer a high degree of mechanical safety. To test the tensile load capacity of a terminal point, the terminal point must withstand a given tensile force based on the cross section for over 60 seconds. This test is performed after the bending test.
Technical information Quality tests DIN rails DIN rails/protective conductor busbars Extract from IEC 60947-7-2/EN 60947-7-2/DIN EN 60947-7-2/VDE 0611-3 Phoenix Contact type Rail profile Material Short-circuit current rating = E CU conductor [mm2]* NS 15 UNPERF 2000MM DIN rail, acc. to EN 60715 – 15 x 5.5 Steel NS 15 PERF 2000MM DIN rail, acc. to EN 60715 – 15 x 5.5 Steel 10 1.2 ** NS 15-AL PERF 2000MM DIN rail, dimensions acc. to EN 60715 – 15 x 5.5 Aluminum 16 1.
Technical information Quality tests Insulation coordination for electrical equipment within low-voltage systems Dimensioning of clearances and creepage distances according to DIN EN 60664-1/ VDE 0110-1. This part of the standard, based on IEC 60664, contains specifications for the insulation coordination of equipment in low-voltage systems. This part is applicable for equipment to be used at an altitude of up to 2000 m above sea level.
Technical information Quality tests Dimensioning of clearances Schematic for determining clearances Nominal voltage of the power supply Rated surge voltage Rated surge voltages for equipment that is directly supplied by the low-voltage network (extract from Table 1) Nominal voltage of the power supply system 1) (mains) acc.
Technical information Quality tests Dimensioning of creepage distances Schematic for determining creepage distances Single-phase three or two-conductor AC or DC voltage systems (extract from Table 3a) Nominal voltage of the power supply system (mains) *) Nominal mains voltage of the power supply Voltages for Table 4 For conductorconductor insulation 1) Rated AC/DC voltage Pollution degree Minimum creepage distance K acc.
Technical information Quality tests Dielectric test IEC 60947-7-1/-2/UL 1059 This test is an electrical test to prove that there are sufficient creepage distances. To test that the distances between the potentials of two neighboring terminal blocks and between a terminal block and the DIN rail are sufficient, an appropriate test voltage is applied. Rated insulation voltage (Ui) The r.m.s. or DC voltage value that is permanently acceptable as a maximum when correctly used.
Technical information Quality tests Voltage-drop test IEC 60947-7-1/-2 Voltage pick-off on a screw terminal block Temperature measuring point ≤ 10mm Voltage drop measuring point ≤ 10mm mV Voltage drop measuring point In every terminal point of a terminal block, one or more conductors are connected - depending on the connection technology. Current transfer is strongly affected by the electrical resistance between the conductor and the current bar. High-quality contacts create a gas-tight connection.
Technical information Quality tests Temperature-rise test IEC 60947-7-1/-2/UL 1059 The rise in temperature of a terminal block must be kept to an absolute minimum. The contact resistance must therefore be as low as possible. This test is used to document the rise in temperature that occurs at room temperature during exposure to a test current.
Technical information Quality tests SCCR – short-circuit current rating SCCR – short-circuit current rating As of April 2006, the NEC (National Electrical Code) has required the shortcircuit current rating of industrial controllers to be specified. This SCCR (short-circuit current rating) can be calculated with the help of UL 508A and must be specified for all main circuits and for the supply of the control voltage on the rating plate of all industrial switchgear in the USA.
Technical information Quality tests Technical notes - fuse terminal blocks Fuse terminal blocks in compound arrangement Arrangement with individual fuse terminal block Attention: The cartridge fuse holders should be selected according to the maximum power dissipation (self-heating) of the cartridge fuse-links. The thermal conditions in closed fuse holders should be checked according to the application and installation. Higher ambient temperatures are an additional strain on fuse-links.
Technical information Quality tests Aging test IEC 60947-7-1/-2 From the point of view of long lifecycles of the terminal blocks, the aging behavior also plays an important role. In this test, the contact quality is verified by means of simulated aging. To simulate several years of use, five terminal blocks are mounted horizontally on a rail and connected in series using conductors with the rated cross section.
Technical information Quality tests Environmental testing methods IEC 60068-2-42/43 The mechanical and electrical service life of terminal blocks is directly dependent on the metal parts and insulation materials used. To evaluate the climatic effects on electrical connections, terminal blocks are subjected to various environmental simulation tests. The conductor contact points, the knife disconnect points, and the test contacts are included in these tests.
Technical information Quality tests Temperature shock test DIN EN 60352 P4 As mentioned earlier, rapid changes in temperature frequently occur near processrelated sources of heat and cold in process engineering. This test verifies that the contact quality of the terminal points remains consistently high even with rapid temperature changes. For testing purposes, five terminal blocks are mounted on the support and wired to a conductor with the rated cross section.
Technical information Quality tests Vibration test DIN EN 61373 – broadband noise (intensity according to DIN EN 50155) In transportation technology, terminal blocks are always exposed to vibrations and shocks. These occur particularly in the vicinity of engines, rotating drives, and axles. For a practical simulation of the vibration stress, the test objects are subjected to broadband noise-induced vibrations.
Technical information Quality tests Quality features of insulation material Thermoplastics The majority of our insulating housing is made from thermoplastic materials. Roughly speaking, these can be divided into amorphous and semi-crystalline substances. Thermoplastics are processed using the efficient and environmentally-friendly injection molding process. They have good recycling properties and can be re-used.
Technical information Quality tests Insulation material properties IEC 60210-1/UL 746 B In the following tests, an increased load on the terminal block is simulated over a longer period of time. The behavior of plastics at constantly higher temperatures is described with respect to their tensile strength and insulation properties. IEC 60216 and UL 746 B specify a temperature index that allows conclusions to be drawn regarding the service life of plastics under thermal loads.
Technical information Quality tests Smoke gas development ASTM E 662 Standard ASTM E 662 specifies a procedure for evaluating the specific optical density of the smoke (smoke opacity) during an open fire or a smoldering fire. For this purpose, the percentage of light transmitted in relation to the burning chamber volume is observed. A sample (76 x 76 x maximum 25 mm) is placed in a smoke density chamber (see figure) as defined by the NBS (National Bureau of Standards).
Technical information Quality tests Halogen-free flame protection DIN EN ISO 1043-4 Halogens are the chemical elements fluorine, chlorine, bromine, and iodine. One property of halogen compounds is the reduction in the degree of inflammability when used in plastics. In fire-protection tests, a connection has been established between the release of toxic gases and halogens. Terminal blocks from the CLIPLINE complete system are made of polyamide 6.6 (PA 6.6) with fire protection classification UL 94 V0.
Technical information Quality tests Needle flame test IEC 60947-7-1/-2 As far as the use of terminal blocks is concerned, behavior in fire when in direct contact with a source of ignition is a major criterion. Such sources of ignition could be electric arcs along a creepage distance, for example. Terminal blocks must not aid or accelerate fires and the plastics must have self-extinguishing properties.
Technical information Quality tests Inflammability classification UL 94 UL 94 describes inflammability tests that have gained particular importance in the field of electrical engineering. Behavior in fire is the main focus. Items are classified according to either UL 94 HB (Horizontal Burn) or UL 94 V (Vertical Burn). The test setup is such that the 94 V0/1/2 classifications are stricter than the 94 HB classification. Afterwards, the afterburning times and the drip behavior are evaluated.
Technical information Quality tests Color designations Color Code White WH Red RD Blue BU Green GN Yellow YE Gray GY Brown BN Orange OG Black BK Turquoise TQ Ivory IV Beige BE Olive OL Rose RS Pink PK For further information and full technical data, visit phoenixcontact.
Index Alphabetical Type Order No. Page Type BP 4-5VT A AB-PTI AB-PTI 4/3 AB-PTI 6 AB-PTI/3 3214006 3214053 3214008 3213974 126 139 145 127 AB-SK AB-SK 65 AB-SK 65-D AB-SK 65-D INSULATED 3025341 3026489 3026900 3040889 517 517 519 519 AB-SK TOP AB-SK TOP INSULATED AB-SK-D TOP AB-SK-D TOP INSULATED 3062090 3062074 3062100 3062087 AB-SK/E AB-SK/E-NS 35 AB-SKS 60 AB-STI 16/10 C Order No. Page 3208734 246 Type Order No. Page Type Order No.
Index Alphabetical Type Order No. Page Type Order No.
Index Alphabetical Type Order No. Page Type Order No. Page Type Order No. Page Type Order No.
Index Alphabetical Type Order No. Page Type Order No.
Index Alphabetical Type Order No. Page Type Order No. Page Type Order No. Page Type Order No.
Index Alphabetical Type Order No. Page Type Order No. Page Type Order No. Page Type Order No.
Index Alphabetical Type Order No. Page Type Order No.
Index Alphabetical Type Order No. Page Type Order No. Page Type Order No. Page Type Order No.
Index Alphabetical Type Order No. Page Type Order No. Page Type Order No. Page Type Order No.
Index Alphabetical Type Order No. Page Type Order No.
Index Alphabetical Type Order No. Page Type Order No. Page Type Order No. Page Type Order No.
Index Alphabetical Type Order No. Page Type Order No. Page Type Order No.
Index Alphabetical Type Order No. Page ZFK 6-DREHSI (5X20) ZFK 6-DREHSI (6,3X32) ZFK 6-DREHSI/K (5X25) ZFK 6-DREHSILA 250 (5X20) 3025040 3025273 3029457 3025590 199 199 199 199 ZFK 6-DREHSILA 250 (6,3X32) ZFK 6-DREHSILED 24 (5X20) ZFK 6-DREHSILED 24 (6,3X32) 3025574 3025600 3025587 199 199 199 640 PHOENIX CONTACT Type Order No. Page Type Order No. Page Type Order No.
For up-to-date modifications or supplements to the catalog contents, please visit: phoenixcontact.