Datasheet

ManualsBrandsPhoenix Contact ManualsConnectorsPick-off terminal block Green/Yellow, 3260151

https://www.phoenixcontact.com/hq/products/3260151

01/19/2017Page1/9

Pick-off terminal block-AGK 10-PTPOWER GN/YE-3260151

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's

documentation. Our General Terms of Use for Downloads are valid

(http://phoenixcontact.com/download)

Pick-off terminal block, Connection method:Push-in connection, Cross section: 0.5 mm²-16 mm²,

AWG:20-6, Width:18.5 mm, Height:34.7 mm, Color:green/yellow, Mounting type:On base element

Why buy this product

The fully insulated, optional use pick-off terminal block enables voltage pick-off

Large-surface marking

Pick-off terminal block, for snapping into the lateral guide

Key Commercial Data

Packing unit 10 STK

GTIN

GTIN 4046356779098

Custom tariff number 85369010

Technical data

General

Note

For use with PTPOWER 50, 95, and 150 Power-Turn high-current

terminal blocks

Number of levels 1

Number of connections 2

Potentials 1

Nominal cross section 10 mm²

Color green/yellow

Insulating material PA

Flammability rating according to UL 94 V0

Rated surge voltage 8 kV

Degree of pollution 3

Overvoltage category III

Insulating material group I

Summary of content (9 pages)

PAGE 1
https://www.phoenixcontact.com/hq/products/3260151 Pick-off terminal block - AGK 10-PTPOWER GN/YE - 3260151 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Pick-off terminal block, Connection method: Push-in connection, Cross section: 0.5 mm² - 16 mm², AWG: 20 - 6, Width: 18.5 mm, Height: 34.
PAGE 2
https://www.phoenixcontact.com/hq/products/3260151 Pick-off terminal block - AGK 10-PTPOWER GN/YE - 3260151 Technical data General Maximum load current 57 A (with 16 mm² conductor cross section) Nominal current IN 57 A Nominal voltage UN 1500 V Open side panel No Relative insulation material temperature index (Elec.
PAGE 3
https://www.phoenixcontact.com/hq/products/3260151 Pick-off terminal block - AGK 10-PTPOWER GN/YE - 3260151 Technical data Connection data 2 conductors with same cross section, stranded, TWIN ferrules with plastic sleeve, min. 1.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic sleeve, max. 2.
PAGE 4
https://www.phoenixcontact.
PAGE 5
https://www.phoenixcontact.com/hq/products/3260151 Pick-off terminal block - AGK 10-PTPOWER GN/YE - 3260151 Accessories Insulating sleeve - MPS-IH GY - 0201728 Insulating sleeve, Color: gray Insulating sleeve - MPS-IH BK - 0201731 Insulating sleeve, Color: black Labeled terminal marker Zack marker strip - ZB 10 CUS - 0824941 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, Mounting type: Snap into tall marker groove, for terminal block width: 10.
PAGE 6
https://www.phoenixcontact.com/hq/products/3260151 Pick-off terminal block - AGK 10-PTPOWER GN/YE - 3260151 Accessories Zack marker strip - ZB10,LGS:GLEICHE ZAHLEN - 1053030 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed horizontally: Identical numbers 1 or 2, etc. up to 100, Mounting type: Snap into tall marker groove, for terminal block width: 10.2 mm, Lettering field: 10.15 x 10.
PAGE 7
https://www.phoenixcontact.com/hq/products/3260151 Pick-off terminal block - AGK 10-PTPOWER GN/YE - 3260151 Accessories Zack Marker strip, flat - ZBF10 CUS - 0825031 Zack Marker strip, flat, can be ordered: Strip, white, labeled according to customer specifications, Mounting type: Snap into flat marker groove, for terminal block width: 10 mm, Lettering field: 5.15 x 10 mm Zack Marker strip, flat - ZBF10,LGS:FORTL.
PAGE 8
https://www.phoenixcontact.com/hq/products/3260151 Pick-off terminal block - AGK 10-PTPOWER GN/YE - 3260151 Accessories Screwdriver - SZF 1-0,6X3,5 - 1204517 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.
PAGE 9
https://www.phoenixcontact.com/hq/products/3260151 Pick-off terminal block - AGK 10-PTPOWER GN/YE - 3260151 Accessories Marker for terminal blocks - UC-TMF 10 - 0818124 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMSP1-PLOTTER, PLOTMARK, Mounting type: Snap into flat marker groove, for terminal block width: 10.2 mm, Lettering field: 9.6 x 5.