User Manual
Table Of Contents
- 1 Description
- 2 Table of contents
- 3 Ordering data
- 4 Technical data
- Dimensions
- General data
- Power supply for module electronics
- Wireless interface
- Digital inputs
- Digital outputs
- Analog inputs
- Analog outputs
- Test voltage
- Ambient conditions
- Certification
- Emitted interference in acc. with EN 61000-6-4
- Conformance
- Limitation of simultaneity, derating
- Tolerance of analog inputs and outputs
- 5 Safety regulations and installation notes
- 6 Local diagnostic and status indicators
- 7 Connect supply, actuators, and sensors
- 8 Basic circuit diagram
- 9 Connection example
- 10 Assignment of terminal points to the remote station
- 11 Antennas
ILB BT ADIO MUX...
Preliminary Preliminary Preliminary Preliminary
7173_en_11 PHOENIX CONTACT 13 / 18
8 Basic circuit diagram
Figure 4 Basic circuit diagram
9 Connection example
The numbers above the device identify the connector slots.
Figure 5 Connection example
IN
OUT
OUT
Analog
Digital
24 V DC
3,3 V DC
24 V DC
15 V DC
μC
IN
U
L
U
A
1234567
OUT 4
IN 6
24V
OUT
A
OUT
B
IN
C
IN
D
-
U
A
+
-
U
L
+
A Actuator at the voltage output (channel1)
B Actuator at the current output (channel2)
C Active sensor with current output (channel1)
D Active sensor with voltage output (channel2)