User Manual
Table Of Contents
- 1 Description
- 2 Table of contents
- 3 Ordering data
- 4 Technical data
- Dimensions
- General data
- Power supply for module electronics
- Wireless interface
- Digital inputs
- Digital outputs
- Analog inputs
- Analog outputs
- Test voltage
- Ambient conditions
- Certification
- Emitted interference in acc. with EN 61000-6-4
- Conformance
- Limitation of simultaneity, derating
- Tolerance of analog inputs and outputs
- 5 Safety regulations and installation notes
- 6 Local diagnostic and status indicators
- 7 Connect supply, actuators, and sensors
- 8 Basic circuit diagram
- 9 Connection example
- 10 Assignment of terminal points to the remote station
- 11 Antennas
ILB BT ADIO MUX...
Preliminary Preliminary Preliminary Preliminary
7173_en_11 PHOENIX CONTACT 14 / 18
10 Assignment of terminal points to the remote station
Master Slot 4 (IN) 5 (IN)
Terminal point1.12.11.22.21.32.31.42.41.12.11.22.21.32.31.42.4
LED 1234567812345678
Slave Slot 2 (OUT) 3 (OUT)
Terminal point1.12.11.22.21.32.31.42.41.12.11.22.21.32.31.42.4
LED 1234567812345678
Slave Slot 4 (IN) 5 (IN)
Terminal point 1.1 2.1 1.2 2.2 1.3 2.3 1.4 2.4 1.1 2.1 1.2 2.2 1.3 2.3 1.4 2.4
LED 1234567812345678
Master Slot 2 (OUT) 3 (OUT)
Terminal point 1.1 2.1 1.2 2.2 1.3 2.3 1.4 2.4 1.1 2.1 1.2 2.2 1.3 2.3 1.4 2.4
LED 1234567812345678
Master Slot Connector 7: Analog IN
Terminal point 1.1 2.1 1.2 2.2
Slave Slot Connector 6: Analog OUT
Terminal point 1.1 2.1 1.2 2.2
Slave Slot Connector 7: Analog IN
Terminal point 1.1 2.1 1.2 2.2
Master Slot Connector 6: Analog OUT
Terminal point 1.1 2.1 1.2 2.2