User Manual
Table Of Contents
- 1 Description
- 2 Table of contents
- 3 Ordering data
- 4 Technical data
- Dimensions
- General data
- Power supply for module electronics
- Wireless interface
- Digital inputs
- Digital outputs
- Analog inputs
- Analog outputs
- Test voltage
- Ambient conditions
- Certification
- Emitted interference in acc. with EN 61000-6-4
- Conformance
- Limitation of simultaneity, derating
- Tolerance of analog inputs and outputs
- 5 Safety regulations and installation notes
- 6 Local diagnostic and status indicators
- 7 Connect supply, actuators, and sensors
- 8 Basic circuit diagram
- 9 Connection example
- 10 Assignment of terminal points to the remote station
- 11 Antennas
ILB BT ADIO MUX...
Preliminary Preliminary Preliminary Preliminary
7173_en_11 PHOENIX CONTACT 3 / 18
Description Ty pe Order No. Pcs./Pkt.
Wireless-MUX set, two modules with 16 digital inputs and
outputs and 2 analog inputs and outputs (0...20mA,
0...10V) each, incl. omnidirectional antennas with 1.5m
cable
ILB BT ADIO MUX-OMNI 2884208 1
Wireless-MUX set, two modules with 16 digital inputs and
outputs and 2 analog inputs and outputs (0 - 20mA,
0 - 10V) each, without antennas
ILB BT ADIO MUX 2702875 1
3Ordering data
Accessories Ty pe Order No. Pcs./Pkt.
Inline shield connector IB IL SCN 6-SHIELD-TWIN 2740245 5
Connector, colored, for Inline power and segment terminal
blocks
IB IL SCN-PWR IN-CP 2727637 10
Connector, for digital 1, 2 or 8-channel Inline terminals IB IL SCN-8 2726337 10
Labeling field, width: 12.2 mm IB IL FIELD 2 2727501 10
Insert strip, Sheet, white, unlabeled, can be labeled with:
Office printing systems, CMS-P1-PLOTTER:Laser
printer, Mounting type: Insert, Lettering field: 62 x 10 mm
ESL 62X10 0809492 1
Zack Marker strip, flat, white,
for terminal block width: 6.2 mm
ZBF 6:SO/CMS 0808778 1
Flat zack marker sheet, white,
for terminal block width: 6.2 mm
ZBFM 6:SO/CMS 0803650 1
Flat zack marker sheet, Sheet, white, unlabeled, can be
labeled with: CMS-P1-PLOTTER, PLOTMARK, Mounting
type: Snap into flat marker groove, for terminal block
width: 6.2 mm, Lettering field: 5 x 5.5 mm
ZBFM 6/WH:UNBEDRUCKT 0803618 10
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/
15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color:
gray End clamp, Width:5.15 mm, Height:35 mm,
Length:48.5 mm, Color:gray
CLIPFIX 35-5 3022276 50
Omnidirectional antenna, 2.4 GHz, 2 dBi, linear vertical,
1.5 m cable, RSMA (male), IP65, 50 Ω impedance
RAD-ISM-2400-ANT-OMNI-2-
1-RSMA
2701362 1
Omnidirectional antenna with protection against
vandalism, 2.4 GHz, 3 dBi gain, IP55 degree of protection,
1.5 m cable length, RSMA connection (male), h/v 360°/
85° apex angle.
Appropriate mounting material is available for wall
mounting.
RAD-ISM-2400-ANT-VAN-3-
0-RSMA
2701358 1
Omnidirectional antenna, 2.4 GHz, 6 dBi, linear vertical,
opening angle 360°/30°, N (female), IP67, incl. mounting
bracket and mast clips for 45mm - 100mmdiameter,
stainless steel, ATEX &IECEx approval, salt water
resistant
RAD-ISM-2400-ANT-OMNI-6-
0
2885919 1