Installation Manual

15
4. Attach Antenna
cable to bracket.
5. Attach antenna whip
to cable base.
Note: Use Part Number:
496-0006 antenna assy.
Caution
The installer(s) must
follow the antenna
installation procedure set
fourth in this manual to
insure that while the
device is in operation, a
separation of at least 20
cm is maintained between
antenna and the user.
These instructions must
be followed in order to
meet the FCC RF
exposure guidelines.
These requirements can
only be met if the antenna
is installed as described
in the installation
procedure steps and
depicted in the pictures of
the antenna location and
mounting bracket
Caution
The installer(s) must
follow the antenna
installation procedure set
fourth in this manual to
insure that while the
device is in operation, a
separation of at least 20
cm is maintained between
antenna and the user.
These instructions must
be followed in order to
meet the FCC RF
exposure guidelines.
These requirements can
only be met if the antenna
is installed as described
in the installation
procedure steps and
depicted in the pictures of
the antenna location and
mounting bracket