Installation Manual
Table Of Contents
- Live With Safety
- Overview
- Parts List
- Basic System Layout
- Installation Instructions
- Trouble Shooting
16
6. Route UHF antenna cable
down roof support. Placing the
first tie strap at the top bend of
support, and another every 6-8
inches.
Important:
Do not pull UHF
cable tight at the roof
location. Allow a gentle bend
to cart frame.
= Zip tie location
6. This completes the UHF
bracket and UHF cable
installation.
Note: Leave UHF cable
connector end unattached. It
will be connected latter in the
installation.