Installation Manual

Overview of Club Car Post 2000 Power Harness Installation

• Make sure key switch is in the off position.

• Use caution when working around the batteries. Battery acid may exist around the terminal area.

• Verify the positive lead and ground of cart.

• When routing the Power Harness cable make sure the cable does not interfere with cart operation.

•

The cable should be isolated of working parts of the cart.

•

Two installers are required to remove seat to avoid back injuries.

Parts Required for Assembly of Power Supply Bracket and Mounting Power Supply

1. Power Harness

Electric (P/N 440-0600)

Gas (P/N 440-0660)

2. Power Supply Bracket

(P/N 800-0267)

3. Clamp

(P/N 800-0255)

4. Phillip Head Screw

(P/N 812-0067)

5. Bolt (4)

(P/N 816-0006)

6. Power Supply

(P/N JDGT-0002)

Club Car Power Harness Installation Parts